Design Craft MIllworks 60000 Installation guide

Type
Installation guide
16
Project 334 Corner Pergola
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Project 334 Corner Pergola
152 1
8
"
146 1
4
"
104 7
16
"
192"
=
(17")
=
(17")
96 11
16
"
88 13
16
"
102"
9 7
8
"
114"
115 7
8
"
102"
16
Overview
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Project 334 Corner Pergola
4" typ
4 1
8
"
=
(2
1
16
")
typ
=
(2
1
16
")
typ
0"
16"
32"
48"
64"
16"
32"
48"
64"
80"
80"
6 1
8
" typ
0"
8"
16"
24"
32"
40"
48"
56"
64"
72"
80"
88"
16
Overview (continue)
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Project 334 Corner Pergola
2x 192"
182"
166"
150"
134"
118"
102"
86" 70"
54"
38"
16
Overview (continue)
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Project 334 Corner Pergola
2x
38"
2x
54"
2x
70"
2x
86"
3x
102"
16
Overview (continue)
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Project 334 Corner Pergola
6 15 4 10 11 12
13
8
9
2
1
14
3
7
5
ITEM
NO.
QTY.
PART NUMBER
DESCRIPTION
1 3 56608
Assembly, 6x6 Post Base
2 3 56610
8" Post to Beam
3 2 56616
45 Flush Inside
4 3 56617
Assembly, 2" Rafter Clip
5 2 56611
Truss Accent
6 3
6x6 Cedar Post
see cutlist
7 1
2x8 Cedar Board
see cutlist
8 1
2x8 Cedar Board
see cutlist
9 2
2x8 Cedar Board
see cutlist
10 3
2x6 Cedar Board
see cutlist
11 2
2x6 Cedar Board
see cutlist
12 2
2x6 Cedar Board
see cutlist
13 2
2x6 Cedar Board
see cutlist
14 2
2x6 Cedar Board
see cutlist
15 12
2x4 Cedar Board
see cutlist
16
- -
Nails or Screws
16
Bill of Material
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Project 334 Corner Pergola
56610
(2 pack)
56640
(6 pack)
56608
56611 & 56616
(2 pack)
56617
(10 pack)
16
OZCO
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Project 334 Corner Pergola
16
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Project 334 Corner Pergola
Suggested Tools
(others may be required)
6x6
qty
bought length
cut length
notes
3
8'
no cut
-
2x8
qty
bought length
cut length
notes
1
10'
115-7/8"
decora cut both ends; see template
1
10'
114"
decora cut both ends; see template
2
16'
no cut
decora cut both ends; see template
2x6
qty
bought length
cut length
notes
2
8'
38" & 54"
2 pieces from each board; decora cut both ends; see template
2
12'
70"
decora cut both ends; see template
2
16'
86"
decora cut both ends; see template
3
10'
102"
decora cut both ends; see template
2x4
qty
bought length
cut length
notes
1
12'
38" & 102"
2 pieces from each board
1
16'
54" & 70"
2 pieces from each board
1
8'
86"
-
1
12'
118"
-
1
12'
134"
-
1
16'
150"
-
1
16'
166"
-
1
16'
182"
-
2
16'
no cut
-
16
Cutlist
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Project 334 Corner Pergola
5 7
8
"
1"
R2
1
2
"
R3"
5 7
16
"
2 15
16
"
16
Template
scale 1:2
print 2x
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Project 334 Corner Pergola
3864
152 1
8
"
2803
110 3
8
"
2803
110 3
8
"
Locate desired
center of structure
if site is not level,
see Ozco Site Leveling instruction
16
site plan
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Project 334 Corner Pergola
Tool Required
3/8" Driver
(Hex Cap Nut)
provided
(OWT Screw)
provided
16
step 1
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Project 334 Corner Pergola
Tool Required
3/8" Driver
(Hex Cap Nut)
provided
(OWT Screw)
provided
16
step 2
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Project 334 Corner Pergola
Tool Required
3/8" Driver
(Hex Cap Nut)
provided
(OWT Screw)
provided
16
step 3
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Project 334 Corner Pergola
rafter clip is behind
accent plate in this
location on both sides
56616
8"
0"
16"
32"
48"
64"
16"
32"
48"
64"
80"
80"
Tool Required
3/8" Driver
(Hex Cap Nut)
provided
(OWT Screw)
provided
16
step 4
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Project 334 Corner Pergola
4" typ
4 1
8
"
=
(2
1
16
")
typ
=
(2
1
16
")
typ
6 1
8
"
0"
8"
16"
24"
32"
40"
48"
56"
64"
72"
80"
88"
16
step 5
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Project 334 Corner Pergola
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Design Craft MIllworks 60000 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI