Typical Installation
Installation Instructions, 56667
T-Tie Plate for 4" Lumber
Installation Instructions, 56667
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
1
3
.12
shown without screws
304.80
12.00
215.90
8.50
Default
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
2
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
Installation Instructions, 56667
Timber Bolt
(optional fastener)
sold separately
Timber Screw
(optional fastener)
sold separately
Suggested Tools
(others may be required)
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, 56667
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
3
secure as shown
centerline locator
C
L
C
L
optional Timber Bolt mounting (6x)
optional Timber Screw mounting (8x)
mark centerline
standard installation
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
4
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
Installation Instructions, 56667
with optional Timber Bolts
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
5
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
Installation Instructions, 56667
3/8" Driver
(Hex Cap Nut) provided
Tool Required
(OWT Screw) provided
with optional Timber Screws
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
6
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
Installation Instructions, 56667
3/8" Driver
(Hex Cap Nut) provided
Tool Required
(OWT Screw) provided
/
