OWT Ornamental Wood Ties 56697 Installation guide

Type
Installation guide
OWT Timber
Bolts installed
shown with 56637 Post
to Beam Bolt Inline
connector
dato cut
required
dato cut
required
Timber Bolts may be
installed as standalone
fastener or with many
OZCO connector options
1
Installation Instructions,
OWT Timber Bolts
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, OWT Timber Bolts
[101-152] 4-6"
Assembly, OWT Timber Bolt 4-6"
56649-10
[152-203] 6-8"
Assembly, OWT Timber Bolt 6-8"
56650-10
[203-254] 8-10"
Assembly, OWT Timber Bolt 8-10"
56651-10
[254-304] 10-12"
Assembly, OWT Timber Bolt 10-12"
56652-10
.375
5/16"
clearance
hole
3/4"
clearance
hole
19.05
.75
15.88
.63
38.10
1.50
25.40
1.00
15.24
.60
OZCO
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, OWT Timber Bolts
2
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, OWT Timber Bolts
Suggested Tools
(others may be required)
3
mark locations
plate temporarily installed
for installations without
post to beam connector,
proceed to next step
step 1
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, OWT Timber Bolts
4
plate from
step 1
removed
secure as desired
beam can be nailed/screwed in
place(instead of clamped) in area
covered by plate shown in step 1
pencil marks
step 2
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, OWT Timber Bolts
5
3/4
drill through
beam & post"
installation example
without post to beam
connector
step 3
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, OWT Timber Bolts
6
adjust as necessary
before installation
repeat on
opposite side
installation example
without post to beam
connector
step 4
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, OWT Timber Bolts
7
Tool Required
3/8" Driver
(Hex Cap Nut)
provided
install caps finger tight; both sides
DO NOT USE POWER DRIVER
3/8" Driver
cutaway view
step 5
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, OWT Timber Bolts
8
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

OWT Ornamental Wood Ties 56697 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI