2. Riverside Furniture
  3. 21258

Riverside Furniture 21258 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Riverside Aberdeen 21258 Side Chair. This document details how to put the chair together using bolts, washers, and an Allen wrench. It also specifies that you should not fully tighten the bolts until the next step. I'm ready to answer any questions you have about the assembly process or the components.
  • What should I place the Chair Back Assembly on?
    What size bolts are used to attach the Chair Seat to the Back Assembly?
    When should I fully tighten the bolts?
Riverside
Components and Hardware List (for one chair)
FURNITURE
Made in Viet Nam
Page 1 of 2
Aberdeen
Dining Room
Assembly Instructions
Steps:
1. Place the Chair Back Assembly (A) on a soft and smooth surface such as a blanket or carpet.
2. Attach Chair Seat (B) to the Back Assembly by using the 3-1/4" long Bolt (D) Spring Washer (G)
and Flat Washer (H) into the back corners of the Seat and 1-1/2" long Bolt (F) Spring Washer (G)
and Flat Washer (H) into the middle of the Seat, as shown. Do not fully tighten Bolts until after
next step.
#21258 Side Chair
Riverside
FURNITURE
Made in Viet Nam
Page 2 of 2
Aberdeen
Dining Room
Assembly Instructions
3. Attach Front Legs (C) to the Chair Seat (B) by using the 2-1/4" long Bolts (E) Spring Washer (G) and
Flat Washer (H) as shown in Step 3.
4. Turn the Chair upright on a flat surface to level chair and tighten all Bolts using the Allen Wrench (I).
/