2. Riverside Furniture
  3. 59452

Riverside Furniture 59452 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Myra Uph Side Chair. This document provides a detailed guide for assembling the chair, including a hardware list, diagrams, and step-by-step instructions, making sure you have everything you need to build it properly. I'm here to answer any questions you may have about the process.
  • What is the first step in assembling the chair?
    How do you attach the Chair Seat to the Back Assembly?
    What tool is needed for assembly?
#59452
Uph Side Chair
Riverside
email: [email protected]
FURNITURE
Made in Viet Nam
Page 1 of 2
Back Assembly
A1 pc. B
Chair Seat
1 pc.
Be sure to check all packing material carefully
for small parts, which may have come loose
inside the carton during shipment.
D
Front Leg
2 pcs.
I
EF
5mm Allen
Wrench
G
4 pcs. 9 pcs. 9 pcs.
5 pcs. H
1 pc.
Steps:
1. Place the Back Assembly (A) on a soft and smooth surface.
2. Attach Chair Seat (B) to the Back Assembly (A) by using the 3" long Bolt (F) Spring Washer (G)
and Flat Washer (H) into the back corners of the Seat and 2" long Bolt (E) Spring Washer (G) and
Flat Washer (H) into the middle of the Seat, as shown (Detail A). Do not fully tighten Bolts
until after next step.
5/16" Spring
Washer
M5/16"-18 x 3"
Long Allen Head
Bolt
5/16" *19*2mm
Flat Washer
M5/16"-18 x 2"
Long Allen Head
Bolt
A
Detail A
IEGHF
I
HG
B
Myra
Dining Room
Assembly Instructions
Components and Hardware List
Riverside
email: [email protected]
FURNITURE
Made in Viet Nam
Page 2 of 2
3. Attach Front Legs (D) to the Chair Seat (B) by using the 2" long Bolts (E) Spring Washer (G) and Flat
Washer (H) as shown in (Detail B).
4. Turn the Chair upright on a flat surface to level chair and tighten all Bolts using the Allen Wrench (I).
I
E
G
H
Detail B
D
Myra
Dining Room
Assembly Instructions
/