2. Riverside Furniture
  3. 15257

Riverside Furniture 15257 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Wood Seat Side Chair model 15257. This document provides a detailed, step-by-step guide on how to assemble the chair using the included hardware and an Allen key. I'm ready to assist with any questions you might have about the contents of the document.
  • What should I check for before assembling?
    Where should I assemble the chair?
    When should bolts be fully tightened?
    How to level a chair after assembly?
Made in Viet Nam
email: in[email protected]m
Components and Hardware List
Page 1 of 1
#15257
Wood Seat Side Chair 2in
Warning :
- Be sure to check all packing material carefully for small parts,
which may have come loose inside the carton during shipment.
- To prevent possible scratches and damage, this furniture must be
assembled on a soft surface such as a blanket or carpet.
Hailey
Dining Room
Assembly Instructions
Chair Back
1 pc.
AB
Wood Seat
1 pc.
C
2 pcs.
Front Leg
D
4 pcs.
Allen Head Bolt
Ø5/16 x 2"
E
4 pcs.
Allen Head Bolt
Ø5/16 x 3-1/8"
F
1 pc.
Allen Head Bolt
Ø5/16 x 1-1/2"
G
9 pcs.
Spring Washer
5/16'
H
9 pcs.
Flat Washer
5/16" x 19 x 2mm
I
1 pc.
4mm Allen Key
I
F
G
H
Note:
1. Do not fully tighten bolts until the chair is
completely assembled.
2. Set the chair upright on a flat surface to level the
chair and then tighten all bolts with the allen key.
I
E
G
A
B
Step 1
Step 2 Step 3
/