KWorld PVR-TV 713X Installation guide

Brand: KWorld

Model: PVR-TV 713X

Type: Installation guide

PVR-TV 713X Installation Manual

Contents

Ver 2.0

Chapter 1 : PVR-TV 713X PCI TV Card Hardware Installation.......................................................................2

1.1 Package Contents.................................................................................................................................2

1.2 System Requirements...........................................................................................................................2

1.3 Hardware Installation...........................................................................................................................2

Chapter 2 : PVR-TV 713X Utilities And Drivers Setup....................................................................................3

Chapter 3 : PVR PLUS Software Installation....................................................................................................5

Chapter 4 : PVR PLUS Software Functions......................................................................................................7

Chapter 5 : FAQ.................................................................................................................................................8

1. How to reset the TV system? .............................................................................................................8

2. How to check if the drivers have been installed successfully or not?................................................8

3. How to check if the TV713X Remote Control can work fine?..........................................................8

Note: For multi language installation manual, please install Adobe Acrobat Reader from autorun after

inserting the CD into the CD ROM. Click “Browse” and open Installation Manual file where multi

language installation manuals are in.

Chapter 1 : PVR-TV 713X PCI TV Card Hardware Installation

1.1 Package Contents

Unpack your PVR-TV 713X PCI TV card package and make sure that all items are intact. The following

items should be included in your package:

 TV713X PCI TV Card

 Audio cable

 Remote control and remote sensor

 FM antenna (Optional)

 PVR PLUS user manual

 Installation manual

 Installation CD

1.2 System Requirements

 Pentium-III 800 MHz or higher (recommended)

 128 MB RAM of system memory or above (recommended)

 PCI 2.2 compliant slot

 Graphics card (Must support DirectX 9.0)

 Sound card (AC97 compatible sound card)

 1GB free HD space

 CD-ROM drive (For software installation)

 Microsoft Windows ® 98SE/ME/2000/XP

1.3 Hardware Installation

Please follow the steps shown on the right for installation of your TV Card and follow the pictorial guide

below for peripheral connections.

1. Turn off your computer power and

any peripherals.

2. Select an available PCI slot and

remove the slot cover, screw, etc.

3. Push the TV card firmly into the slot

until it snaps in place and secure the

card by replacing the screw you

remove from step 2.

4. Place the PC lid cover back then

power on.

Chapter 2 : PVR-TV 713X Utilities And Drivers Setup

PVR-TV 713X PCI TV card comes with complete Windows software utilities. These utilities and drivers

can be found on the CD included in the package. During installation, it is highly recommended to disable

any sub-programs. These include applications such as antivirus software and system monitoring applications.

1. Once you finish the hardware installation, restart your

system. “Windows Found New Hardware Wizard” will

pop up. Please click “Cancel” and run the utilities setup

included in the CD.

2. Insert the installation CD into the CD ROM drive. The

auto run page will appear as the one of the left, please

select “Driver Install”.

3. The InstallShield of “Driver Install” will help you to

install all the drivers and utilities. First, it will install the

TV remote control on your system. Click “Next” to

continue.

4. Then the InstallShield of “Driver Install” will help you

install the TV card driver automatically. Click “Next” to

install PVR-TV 713X WDM drivers.

5. When the message as the one on the left shows, it means

that the driver has been installed successfully. Please click

“Next” to launch “TV Setup Wizard” to initialize TV

settings.

6. After installing drivers successfully, you MUST choose your

local TV system by either choosing “TV System” or “Country”.

If you select the wrong TV system, you may not be able to

watch any TV.

7. You can click the TV System directly to

choose your local TV system. If you

don’t know your local TV System, please

select “Country” to use the default

system.

8. Choose “Yes, I want to restart my computer now” and

click “Finish” to restart your computer and activate the

driver.

Note:

You can restart your computer after installing PVR PLUS

Software application.

Chapter 3 : PVR PLUS Software Installation

After the drivers are installed, the next step you need to do is to install “PVR PLUS”. Follow the steps below

for installation.

1. Insert the installation CD into the CD-ROM drive. The

auto run page appears as the one on the left. Click on

“PVR PLUS” to start installation.

2. The InstallShield Wizard will guide you through

installation of PVR PLUS application. Click “Next” to

continue.

3. Please choose the destination folder where you want to

install the files. You can click “Browse” to change the

destination folder.

4. Setup will add program icons to the Program Folder’s list.

You may type a new folder name, or select one from the

existing folders list. Click “Next” to start installing. Please

wait while installation in process.

5. When the message as the one on the left pops up, click

“Finish” to end the installation.

Chapter 4 : PVR PLUS Software Functions

When using PVR PLUS, There are four different functions to choose from. Picture below is an example of

how the interface looks like and a short description of each function.

• TVR : TVR turns your PC into a

full-featured video recorder.

• MPEG Encoder : MPEG Encoder

converts AVI files into MPEG format.

• Video Editor : Video Editor makes

editing MPEG video files easy.

• Burn DVD : Burn DVD creates VCD,

SVCD and DVD that can be played on a PC or

DVD player.

Note: For more detailed descriptions, please refer to PVR PLUS user manual.

Chapter 5 : FAQ

1. How to reset the TV system?

Ans : To re-set the TV system again, follow the pictorial guide below and choose “TV713X TVSetup” to

change system settings.

Fig. 1

2. How to check if the drivers have been installed successfully or not?

Ans: Ans: Right click on “My Computer” on the desktop and choose “Properties”. Once in “Properties”

window, click on “Device Manager” in Hardware panel. Click on the plus icon of “Sound, video and

game controllers” to open the device list. The first line where it says “KWorld TV7133 WDM Video

Capture” under Sound, video and game controllers, is depending on the chipset of your hardware. If

your chipset is 7134, it’ll show TV7134 etc.

3. How to check if the TV713X Remote Control can work fine?

Ans : 1) You have to check if the “TV713X Remote Control” utility is installed or not. Please refer to Fig.1.

2) You have to check if the drivers have been installed or not. See FAQ2.

3) You can check if the “TV713X Remote Control” tray icon is loaded

in the right-bottom of task bar. See Fig.2.

Fig. 2

KWorld PVR-TV 713X Installation guide

KWorld PVR-TV 713X Installation guide

KWorld PVR-TV 713X Installation guide

Related papers

Other documents