1
NB-TV 220 Installation Manual
Contents
Ver 2.1
Chapter 1 : NB-TV 220 TV Card Hardware Installation...................................................................................2
1.1 Package Contents.................................................................................................................................2
1.2 System Requirements...........................................................................................................................2
1.3 Hardware Installation...........................................................................................................................2
Chapter 2 : NB-TV 220 Utilities And Drivers Setup.........................................................................................3
Chapter 3 : HyperMedia Software Installation..................................................................................................5
Chapter 4 : HyperMedia Software Functions ....................................................................................................7
Chapter 5 : FAQ.................................................................................................................................................8
1. How to check to see if NB-TV 220 Utilities have been installed? ....................................................8
2. How to check if the drivers have been installed successfully or not?................................................8
Note: For multi language installation manual, please install Adobe Acrobat Reader from autorun after
inserting the CD into the CD ROM. Click “Browse” and open Installation Manual file where multi
language installation manuals are in.
2
Chapter 1 : NB-TV 220 TV Card Hardware Installation
1.1 Package Contents
Unpack your NB-TV220 package and make sure that all items are included. The following items should be
included in your package:
NB-TV 220 Cardbus
Multi-cable for AV/S-Video and Audio-Out
TV connector
DVB-T antenna
HyperMedia user manual
Installation manual
Installation CD
1.2 System Requirements
PC with Pentium-IV 1.6GHz or above
256MB RAM of system memory or above
Available PCMCIA slot
Graphics card (Must support DirectX 9.0)
Sound card (AC97 compatible sound card)
1GB free HD space
CD-ROM drive (For software installation)
Microsoft Windows ® 2000/XP
1.3 Hardware Installation
Please follow the steps shown below to install the card into your computer:
Step 1: Plug NB-TV 220 into the PCMCIA slot of your notebook.
Step 2: Connect the earphone and speakers to the Multi-Cable if listening to TV audio.
3
Chapter 2 : NB-TV 220 Utilities And Drivers Setup
NB-TV 220 package comes with complete Windows software utilities. These utilities and drivers can be
found on the CD included in the package. During installation, it is highly recommended to disable any
sub-programs. These include applications such as antivirus software and system monitoring applications.
1. Once you finish the hardware installation, restart your
system. “Windows Found New Hardware Wizard” will
pop up. Please click “Cancel” and run the utilities setup
included in the CD.
2. Insert the installation CD into the CD ROM drive. The
auto run page will appear as the one on the left, please
select “Driver Install”.
3. The driver utilities will help you to install all the drivers.
Click “Next” to continue.
Note: TV remote control will be installed onto your system if
your package include.
4. Then the utilities will help you install the TV card driver
automatically. Click “Next” to install the NB-TV 220
drivers.
4
5. Click “Start” to start installing NB-TV 220 drivers.
Please wait while installation is in process.
6. Choose “Yes, I want to restart my computer now” and
click “Finish” to restart your computer and activate the
driver.
Note:
You can restart your computer after installing HyperMedia
software application
5
Chapter 3 : HyperMedia Software Installation
After the drivers are installed, the next step you need to do is to install “HyperMedia”. Please follow the
steps below to install it.
1. Insert the installation CD into the CD-ROM drive. The
auto run page appears as the one on the left. Click on
“HyperMedia” to start installation.
2. The InstallShield Wizard will guide you through
installation the HyperMedia application. Click “Next” to
continue.
3. Please choose the destination folder where you want to
install the files. You can click “Browse” to change the
destination folder.
4. Setup will add program icons to the Program Folder’s list.
You may type a new folder name, or select one from the
existing folders list. Click “Next” to start installing. Please
wait while installation is in process.
6
5. When the message as the one on the left pops up, click
“Finish” to end the installation.
7
Chapter 4 : HyperMedia Software Functions
When using HyperMedia, There are five different functions to choose from. picture below is an example of
how the interface looks like and a short description of each function.
Convert Film
Edit Film
Burn DVD
Analog TVR
Digital TVR
Note: For more detailed descriptions, please refer to HyperMedia user manual.
8
Chapter 5 : FAQ
1. How to check to see if NB-TV 220 Utilities have been installed?
Ans : To check the NB-TV 220 Utilities, follow the pictorial guide below and see if your “Start” menu have
the same file directories like the one below.
Fig.1
2. How to check if the drivers have been installed successfully or not?
Ans: Right click on “My Computer” on the desktop and choose “Properties”. Once in “Properties”
window, click on “Device Manager” in Hardware panel. Click on the plus icon of “Sound, video and
game controllers” to open the device list.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
KWorld DVB-S 300U Installation guide
-
-
-
-
-
-
-
-
-
Other documents
-
Hama 00062773 Owner's manual
-
Dell PowerEdge R940xa Quick start guide
-
Dell 3.2x Series Owner's manual
-
-
-
Dell PowerEdge R6515 Owner's manual
-
Dell PowerEdge M630 Owner's manual
-
-
-