Security Labs SLD275 User manual

4/8/16 Channel Triplex DVRs

Models SLD274 (4 CH), SLD275 (8 CH), SLD276 (16 CH),

& SLD281 (8CH DVR w 17” MONITOR)

8 Channel Triplex DVR

17” LCD Monit

15540 Herriman Blvd. Noblesville, IN 46060 - Customer Support 1-800-774-0284

www.security-labs.com

JPEG2000 DVR User Guide

-1-

Caution ……………………………………………………………………. 3

Package Contents ……………………………………………………………………. 3

Specifications ……………………………………………………………………. 4

CHAP.1 Appearance

1-1 Stand alone DVR Front panel

introduction

……………………………………………………………………. 8

1-2 Stand alone DVR Back panel

introduction

……………………………………………………………………. 10

1-3 LCD DVR Front panel introduction ……………………………………………………………………. 11

1-4 LCD DVR Front panel introduction ……………………………………………………………………. 13

1-5 IR remote control introduction ……………………………………………………………………. 14

CHAP.2 Installation

2-1 Camera and monitor installation ……………………………………………………………………. 15

2-2 Sensor and alarm installation ……………………………………………………………………. 16

2-3 Network and serial port installation ……………………………………………………………………. 17

2-4 HDD installation ……………………………………………………………………. 19

2-5 Power connection ……………………………………………………………………. 20

CHAP.3 Operation

3-1 Display configuration ……………………………………………………………………. 21

3-2 Screen switch ……………………………………………………………………. 22

3-3 PIP view ……………………………………………………………………. 22

3-4 Freeze view ……………………………………………………………………. 22

3-5 View in sequence ……………………………………………………………………. 23

3-6 Zoom view ……………………………………………………………………. 24

3-7 Keylock ……………………………………………………………………. 24

3-8 Switch audio channel ……………………………………………………………………. 24

3-9 Record …………………………………………………………………….

25

3-10 Playback ……………………………………………………………………. 26

CHAP.4 Set up

4-1 Log-in ……………………………………………………………………. 30

4-2 Display setup ……………………………………………………………………. 31

4-3

Configuration ……………………………………………………………………. 32

4-4 Record setup ……………………………………………………………………. 40

4-5 Backup ……………………………………………………………………. 43

CONTENTS

JPEG2000 DVR User Guide

-2-

Disclaimer:

 The product names mentioned in this manual are used for process identification only. The copyright of these

names may belong to other companies.

 The product spec and info are for reference only, and may be updated from time to time without notification.

4-6 External device ……………………………………………………………………

44

4-7 Factory default ……………………………………………………………………

49

4-8 Language ……………………………………………………………………

49

C H AP. 5 DVD+R/CDR Backup

5-1 Data backup …………………………………………………………………… 50

5-2 Player software installation …………………………………………………………………… 51

5-3 Player software interface …………………………………………………………………… 52

CHAP.6 PTZ camera control

6-1 PTZ camera installation …………………………………………………………………… 54

6-2 PTZ camera operation …………………………………………………………………… 55

CHAP.7 Network & remote software

7-1 Network configuration …………………………………………………………………… 56

7-2 Network installation and setup …………………………………………………………………… 56

7-3 Router setup …………………………………………………………………… 59

7-4 Client software …………………………………………………………………… 61

7-5 DDNS setup and operation …………………………………………………………………… 69

Appendix

1. Record time table …………………………………………………………………… 79

2. Firmware upgrade …………………………………………………………………… 81

3. Play only mode …………………………………………………………………… 86

JPEG2000 DVR User Guide

-3-

 For your safety, unplug the power before moving the DVR, installing, or replacing any parts or hard drive.

 Make sure all the power cables and wires are properly set up before using the DVR. Contact your distributor

immediately if there is any noticeable defect.

 To avoid a short circuit, do not place any unnecessary parts inside the DVR.

 Please avoid dramatic changes of the environment such as dust, temperature, and humidity. Keep the DVR in a

temperature ranging from 41°F~104°F (5°C~40°C).

 Keep the DVR in a well-ventilated place and away from any heat generating sources.

 Do not block the DVR’s fan and vent.

 Do not expose the unit to direct sunlight.

 If you have questions concerning installation and setup, please contact customer service.

 Do not attempt repairs yourself. Please contact customer service for further assistance.

 DVR with Hard Disk Drive

 Power Supply

 Power Cable

 Remote Control

 Manual

 Software CD

 Accessories

 (2) AAA Batteries

Caution

Package

JPEG2000 DVR User Guide

-4-

Model Security Labs 4/8/16 CH JPEG2000 Stand alone DVRs

Video I/O

Video Input

4/8/16CH VIDEO IN 1.0 VP-P，75OHM(BNC TYPE)

Video Output (BNC TYPE) X 2

VGA Output Support TFT LCD Monitor (on SLD274-6)

Audio I/O

Audio Input 4 CH Audio Input (MONO)

Audio Output 1 CH Audio output (MONO)

Monitoring Modes

Display Resolution

FULL: 720(H) × 480(V) (NTSC)

720(H) × 576(V) (PAL)

1/4: 360(H) × 240(V) (NTSC)

360(H)

×

288(V) (PAL)

Split Screen FULL/4/6/8/9/13/16 split

ZOOM IN/OUT Live & Playback

PIP Yes

Sequence Yes

Record

Playback

Resolution

FULL

NTSC-720

×

240 / PAL-720

×

288

DUAL NTSC-360×240 / PAL-360×288

QUAD NTSC-360×120 / PAL-360×144

Frame Rate

FULL

4CH: NTSC-60IPS/ PAL-50IPS

8/16CH: NTSC-120IPS/ PAL-100IPS

DUAL

4CH: NTSC-120IPS/ PAL-100IPS

8/16CH: NTSC-240IPS/ PAL-200IPS

QUAD

4CH: NTSC-240IPS/ PAL-200IPS

8/16CH: NTSC-480IPS/ PAL-400IPS

Compression JPEG2000

Quality

LOW NTSC (12 KB/720×240)/PAL(14 KB/720×288)

MID

NTSC (16 KB/720×240)/PAL(19 KB/720

×

288)

HIGH NTSC (20 KB/720×240)/PAL(24 KB/720×288)

SUPER

NTSC (24 KB/720×240)/PAL(29 KB/720

×

288)

HYPER NTSC (28 KB/720×240)/PAL(32 KB/720×288)

Storage Device Hard Disk Drive (EIDE, LBA mode, 3.5”, 7200RPM)

Audio Recording

Bit rate NTSC: 120kb/sec PAL: 100kb/sec

JPEG2000 Standalone DVR Specification

JPEG2000 DVR User Guide

-5-

Playback

Modes

Search Percentage/ Time & Date /Event

Jog Shuttle Dual Knob

Frame Advance Forward / Reverse

Fast Forward

Fast Rewird

x2, x4, x8, x16, x32, x60(NTSC)

x2, x4, x8, x15, x25, x50(PAL)

Slow Forward/Rewind 1/2,1/4,1/8,1/16

Pause Available

Network

Protocol TCP/IP

Remote monitoring

Remote Software: Remote live view, playback, and save as .AVI file.

IE: Remote live view, backup, and save backup to .AVI file.

Users Two simultaneous user access.

Back-up

Backup method Video out to VCR, Backup via IE, DVD+R, CDR backup

PTZ Control RS485 with most popular protocols

RS232 Controls DVR host through RS232

Alarm Inputs

4CH: 4 Alarm Inputs

8CH: 8 Alarm Inputs

16CH: 16 Alarm Inputs

Alarm Output 1 output with programmable duration

Remote Control Infrared Remote Control

Control Devices Front Panel, IR Remote Control, RS232

Multi-language English / Spanish / Portuguese / German / French

HDD 1or 2 HDDs ( i.e. 2 x 500Gb = 1 terabyte)

Mechanism

Temperature

Operates between 41°F~104°F (5°C~40°C)

Humidity Keep Under 90%

Dimensions 16.9” (W) x 18” (D) x 4”(H)

Weight 17.6 lbs. (w/o HDD)

Power Supply 100-240VAC@ 2A 50/60Hz to DC 12V @ 8Amp output

JPEG2000 DVR User Guide

-6-

Model Security Labs 8 CH JPEG2000 Series LCD DVR

Video I/O

Video Input

8CH VIDEO IN 1.0 VP-P，75OHM(BNC TYPE)

Video Output (BNC TYPE) X 2

Audio I/O

Audio Input 4 CH Audio Input (MONO)

Audio Output 1 CH Audio output (MONO)

Monitoring Modes

Display Resolution

FULL: 720(H) × 480(V) (NTSC)

720(H) × 576(V) (PAL)

1/4: 360(H) × 240(V) (NTSC)

360(H)

×

288(V) (PAL)

Split Screen FULL/4/6/8/9 split

ZOOM IN/OUT Live & Playback

PIP Yes

Sequence Yes

Record

Playback

Resolution

FULL

NTSC-720

×

240 / PAL-720

×

288

DUAL NTSC-360×240 / PAL-360×288

QUAD NTSC-360×120 / PAL-360×144

Frame Rate

FULL

4CH: NTSC-60IPS/ PAL-50IPS

8CH: NTSC-120IPS/ PAL-100IPS

DUAL

4CH: NTSC-120IPS/ PAL-100IPS

8CH: NTSC-240IPS/ PAL-200IPS

QUAD

4CH: NTSC-240IPS/ PAL-200IPS

8CH: NTSC-480IPS/ PAL-400IPS

Compression JPEG2000

Quality

LOW NTSC (12 KB/720×240)/PAL(14 KB/720×288)

MID

NTSC (16 KB/720×240)/PAL(19 KB/720

×

288)

HIGH NTSC (20 KB/720×240)/PAL(24 KB/720×288)

SUPER

NTSC (24 KB/720×240)/PAL(29 KB/720

×

288)

HYPER NTSC (28 KB/720×240)/PAL(32 KB/720×288)

Storage Device Hard Disk Drive (EIDE, LBA mode, 3.5”, 7200RPM)

JPEG2000 LCD DVR Specification

JPEG2000 DVR User Guide

-7-

Playback

Modes

Search Percentage/ Time & Date /Event

Jog Shuttle Dual Knob

Frame Advance Forward / Reverse

Fast Forward

Fast Rewind

x2, x4, x8, x16, x32, x60(NTSC)

x2, x4, x8, x15, x25, x50(PAL)

Slow Forward/Rewind 1/2,1/4,1/8,1/16

Pause Available

Network

Protocol TCP/IP

Remote monitoring

Remote Software: Remote live view, playback, and save as .AVI file.

IE: Remote live view, backup, and save backup to .AVI file.

Users Two simultaneous user access.

Back-up

Back-up method Backup via IE and USB Drives.

PTZ Control RS485 with most popular protocols

RS232 Controls DVR host through RS232

Alarm Inputs 8CH: 8 Alarm Inputs

Alarm Output 1 output with programmable duration

Remote Control Infrared Remote Control

Control Devices Front Panel, IR Remote Control, RS232

Multi-language English / Spanish / Portuguese / German / French

HDD 1or 2 HDDs ( i.e. 2 x 500Gb = 1 terabyte)

LCD

LCD Panel Diagonal: 17.0” TFT, Input: TTL / LVDS.

Display Resolution 1024 x 768

LCD Color Resolution 16.7 M (8 bits)

LCD Pixel Pitch 0.297mm (H) x 0.297mm (V)

LCD Brightness 300 cd/m2

Mechanism

Temperature

Operates between 41°F~104°F (5°C~40°C)

Humidity Keep Under 90%

Dimension 420mm(W) x 159mm(D) x 425mm(H)

Weight 8 KG (w/o HDD)

Power Supply 100-240VAC@ 2A 50/60Hz to DC 12V @ 8Amp output

JPEG2000 DVR User Guide

-8-

1-1 Standalone DVR Front panel introduction

1.[DVD+R]

 Built-in DVD+R / CDR for backup.

2.[USB Port]

 Connect PC for firmware upgrade.

 HOST: Connect USB memory stick for backup.

3.[IR Receiver & LED Lamps]

 IR Remote Control Receiver.

 DVR Status LED:

RUN- Flashes when using Jog Shuttle.

ACTIVE- On when the Jog Shuttle is ready to use.

REC- On while recording and flashes during stand-by mode.

PLAY- On during playback.

FULL- On when HDD storage is full.

NET- On when the unit is connected to a LAN or WAN.

4.[1~16 Channel Buttons]

 Switches each channel to full screen view (1 for Channel 1, 2 for Channel 2, etc.).

5.[MODE]

 Select full and split screen displays.

6.[K.LOCK]

 Locks the buttons on the front panel.

7.[MENU]

 Enters the menu and set up.

8.[Directions & ENTER]

 Directions- Navigates the menus.

 ENTER- Confirms selected options.

9.[Jog Shuttle]

 During playback the inner knob advances picture by picture. Turn the outer rim clockwise to play fast forward,

and counterclockwise to play fast reverse.

 Also use the Jog Shuttle control to change values in system set-up menus.

CHAP.1 Appearance

JPEG2000 DVR User Guide

-9-

10.[PTZ]

 Press [PTZ] to enter the PTZ control mode. Press the PTZ buttons to control the PTZ camera directly.

11.[+ / -]

 Adjust set-up value.

 Adjust display order of channels.

12.[Control]

 SEQ/AUDIO- Press quickly for AUDIO, and press and hold for 3 seconds to enter SEQ mode.

SEQ - Full screen sequencing or smaller screen sequencing in PIP mode.

AUDIO- Press to play audio and press again to go to the next audio channel.

 PIP- To enter the Picture in Picture mode from full screen mode.

 NEXT- Go to the next PTZ command in PTZ mode.

Go to the next channel in full screen display and the next page in split screen display.

 ZOOM- To enlarge the picture. Use the direction buttons to move to the area to be enlarged.

13.[REC]

 To quickly activate Emergency / Panic Record into continuous record mode with Super Fine quality and Best

resolution. Press STOP to exit the Emergency / Panic Record mode.

14.[STOP]

 Stop emergency recording and return to the record schedule programmed in Record Setup menu.

 Stop playback and return to the LIVE mode.

15.[SEARCH]

 Enters Search dialog window to search by percentage, date / time, or the event list.

16.[PLAY]

 Plays recorded data beginning from the end of the previous playback.

17.[FREEZE]

 Freeze in full screen or split screen

18.[JOG SHUTTLE Button]

 Activates the Jog Shuttle function. Press again to deactivate.

JPEG2000 DVR User Guide

-10-

1-2 Standalone DVR Back panel introduction

[4Channel]

[8Channel]

[16Channel]

1.[RS485, Relay Output, Sensor Input]

 RS485, for connection to PTZ cameras.

 16 sensor inputs and 1 relay output.

2.[VGA Output]

 Connection to a VGA monitor or TFT LCD.

3.[ETHERNET]

 Connection to Ethernet device.

4.[RS-232C]

 Connection to PC or other DVR control devices.

5.[1~16 Camera Input/LOOP Output]

 CAMERA IN- channel 1~16 camera input.

 LOOP- channel 1~16 camera loop out

6.[Monitor / SPOT Output]

 MONITOR- Connection to monitor.

 SPOT- second monitor output. Once alarm or motion is triggered, it will pop up automatically or display in

sequence according to the set up.

7.[Power Input]

 DC power input (DC12V)

8.[Power Switch]

 Power ON/OFF

9.[Audio Input/Output]

 Audio input 1~4 channel and Audio output 1 channel.

JPEG2000 DVR User Guide

-11-

1-3 LCD DVR Front panel introduction

1.[LCD monitor power switch]

 Powers Display Monitor ON/OFF. Please note the DVR is still runs even though the monitor is turned off.

2.[IR Receiver & LED Lamps]

 IR Remote Control Receiver.

 DVR Status LEDs:

REC- On while recording and flashes during stand-by mode.

FULL- On when HDD storage is full.

PLAY- On during playback.

NET- On when the unit is connected to a LAN or WAN.

RUN- Flashes when using Jog Shuttle.

ACTIVE- On when the Jog Shuttle is ready to use.

JPEG2000 DVR User Guide

-12-

3.[Control]

 MODE - Select full and split screen displays.

 SEQ/AUDIO - Press quickly for AUDIO, or press and hold for 3 seconds to enter SEQ mode.

SEQ - Full screen sequencing or smaller screen sequencing in PIP mode.

AUDIO - Press to play audio. Press again to go to the next audio channel.

 PIP - Enters the Picture in Picture mode from full screen mode.

 ZOOM - Enlarges the picture. Use the direction buttons to move to the area to be enlarged.

 FREEZE -

Freeze in full screen or split screen.

 LOCK - Lock the buttons on front panel.

 PTZ - Press to enter the Pan / Tilt / Zoom control mode.

 NEXT - Go to the next command in the PTZ mode.

Go to the next channel in full screen display, or the next page in split screen display.

4.[1~8 Channel Buttons & PTZ control buttons]

 Switches each channel to full screen view (1 for Channel 1, 2 for Channel 2, etc.).

 In PTZ control mode, Press the PTZ buttons to control your PTZ camera directly.

5.[Record and Playback ]

 Panic REC - To quickly activate Emergency / Panic Record into continuous record mode with Super Fine quality

and Best resolution. Press STOP to exit the Emergency / Panic Record mode.

 STOP - Stop emergency recording and return to the record schedule programmed in Record Setup menu..

- Stop playback and return to the LIVE mode.

 SEARCH -

Enter the Search dialog window to search by percentage, date / time, or the event list.

 PLAY - Plays recorded data beginning from the end of the previous playback.

6.[MENU]

 Enters the menu and set up.

7.[+ / -]

 Adjust set-up value.

 Adjust display order of channels.

8.[J.SHUTTLE Button]

 Activates the Jog Shuttle function. Press again to deactivate.

9.[Directions & ENTER]

 Directions- Navigates the menus.

 ENTER- Confirms selected options.

10.[Jog Shuttle]

 During playback the inner knob advances picture by picture. Turn the outer rim clockwise to play fast forward,

and counterclockwise to play fast reverse.

 Also use the Jog Shuttle control to change values in system set-up menus.

11.[Speaker]

 Audio output

JPEG2000 DVR User Guide

-13-

1-4 LCD DVR Back panel introduction

[8CH DVR]

1.[RS-232C]

 Connection to PC or other DVR control devices.

2.[RS485, Relay Output, Sensor Input]

 RS485, for connection to PTZ cameras.

 16 sensor inputs and 1 relay output.

3.[ETHERNET]

 Connection to Ethernet device.

4.[Audio Input/Output]

 Audio input 1~4 channel and Audio output 1 channel.

5.[1~8 Camera Input/LOOP Output]

 CAMERA IN- channel 1~8 camera input.

 LOOP- channel 1~8camera loop out

6.[Monitor / VCR Output]

 MONITOR- Connection to monitor.

 VCR- Connection with VCR for analog backup.

7.[Power Switch]

 Power ON/OFF the LCD DVR.

8.[Power Input]

 DC power input (DC12V).

9.[REMOVABLE HDD RACK]

 To Connect HDD.

10.[USB Port]

 USB Backup-Connect USB memory stick or USB HDD for backup.

DEVICE- Connect PC for firmware upgrade.

11.[ Audio Volume Tuner]

 Adjust the audio volume.

JPEG2000 DVR User Guide

-14-

1-5 IR remote controller introduction

1.[MENU]

 Enter menu or exit

2.[Split /OSD]

 4S: 4 split

 9S: 9 split

 16S: 16 split

 AUDIO: Press to play the audio.Press again to go to the next audio channel.

3.[1~16 Channel]

 Switch channel in live or playback; also used for password entering.

4.[Control function]

 FRZ- Freeze the screen in display

 SEQ- Automatically display full screen or split screen in sequence

 ZOOM- To enlarge the picture. Use the direction buttons and move to

the area to be enlarged.

 PIP- Picture in Picture. Enter PIP mode in full screen

5.[Mode/PT]

 MODE- Multi-screen display selection

 P/T- Enter the PTZ camera control mode

6.[SEARCH/-/+/NEXT]

 SEARCH- Open the search window in playback

 [-]/[+]- For value adjustment in set-up

 NEXT- Go to the next PTZ command in PTZ mode.

Go to the next channel in full screen display and the next page in split screen display

7.[Rec]

 To quickly activate Emergency / Panic Record into continuous record mode with Super Fine quality and Best

resolution. Press STOP to exit the Emergency / Panic Record mode.

8.[Stop]

 Stop the emergency recordand return to the record schedule programmed in the Record Setup.

 Stop playback and return to the LIVE mode.

9.[Functions]

 PLAY- Play the recorded data directly.

 PAUSE- Pause playback.

 REW- Fast rewind, press again to select the speed.

 FF- Fast forward, press again to select the speed.

 STEP- Play picture by picture.

 SLOW- Slow motion playback, press again to select the speed.

10.[ENTER]

 Select or adjust options in setup.

11.[Direction]

 Navigate the menu.

JPEG2000 DVR User Guide

-15-

2-1 Camera and monitor installation

2-1-1 Camera installation

Connect camera(s) to camera in CH1~CH16

※Please do not power up the DVR before the

camera(s) are connected.

2-1-2 Monitor and SPOT installation

Monitor: Connect the MONITOR port on the DVR back panel to the “video in” port on the monitor.

SPOT- second monitor output. Once an alarm input or motion is triggered, cameras will pop up automatically or

display in sequence according to the set up menu.

2-1-3 Loop out installation

To monitor a single channel, connect the “loop out” of

the corresponding channel to a monitor.

To always record a specific channel individually,

connect the “loop out” of the corresponding channel to

a DVR, VCR, or other recording device.

CHAP.2 Installation

JPEG2000 DVR User Guide

-16-

2-2 Sensor and alarm installation

2-2-1 Input & Output

[4Channel]

[8Channel]

[16Channel]

1.[D1~D16 Alarm Input/GND Locations]

 16 Sensor inputs.

2.[Relay Output NO/NC/COM]

 Relay output is NO+COM and NC+COM

2-2-2 Sensor installation

 Alarm will be triggered once one (or more than one) alarm input (D1~D16) causes short circuit or open circuit

with GND.

JPEG2000 DVR User Guide

-17-

2-2-3 Relay output installation

 Alarm output can be NO or NC.

 NO-COM: the NO and COM terminals = open-circuit, closes when an alarm is triggered.

 NC-COM: the NC and COM terminals = closed-circuit, opens when an alarm is triggered.

2-3 Network and serial port installation

2-3-1 Network setup

 Connect the network cable to “Ethernet”on back panel.

 Ethernet Setup between ADSL and Cable is different. For details, please refer to Ch. 7-2 Network installation.

2-3-2 Serial port setup

 You are able to connect the COM port of a PC or other device to the DVR through RS232.

 RS232 settings (baudrate/ parity/ length/ stop bit ) are NOT adjustable.

The transmission baud rate is 19,200bps, length 8 bits, stop bit 1, and the parity is none.

 ASCII-CODE is 1 BYTE.

JPEG2000 DVR User Guide

-18-

# 2 RxD

# 3 TxD

# 5 GND

TxD

# 3

GND # 5

RxD # 2

DVMR unit Other device (PC)

D-SUB 9 cable (twisted RS-232C cable)

 To connect your DVR to a PC, you must use an RS232 cable as illustrated below:

2-3-3 PTZ camera installation

 Please connect the PTZ’s D+ to the DVR’s D+ , and D- to D-.

 After the connection and the related setup is done, you can control your PTZ camera via the front panel

buttons.

2-3-4 Microphone and Speaker installation

[Audio input]

 MIC to the audio input (IN1~IN4) to record audio.

connector

description

1

DCD

2

RxD

3

TxD

4

DTR

5

GND

6

DSR

7

RTS

8

CTS

9

NC

ASCII-CODE

Func.

CODE

Func.

CODE

Func.

CODE

Func.

CODE

Func.

CODE

REC R RIGHT K MODE D CH3 3 CH11 !

STOP S NEXT N PIP I CH4 4 CH12 @

PLAY P ENTER 0X0D SEQ Q CH5 5 CH13 #

SEARCH E - < J.SHU L CH6 6 CH14 $

MENU M + > KLOCK C CH7 7 CH15 %

UP U PTZ T QPLAY Y CH8 8 CH16 ^

DOWN J ZOOM Z CH1 1 CH9 9

LEFT H FRZ F CH2 2 CH10 0

Tip: Use an Amplifier to obtain a better sound recording.

JPEG2000 DVR User Guide

-19-

[Audio output]

 Connect an amplified speaker to the audio output. DVR can play

audio during live view and playback.

2-4 HDD installation

[Steps]

1. Disassemble the bolts as illustrated.

2.Jumper setting

Set up the HDD as MASTER or SLAVE. Please

refer to the HDD manual of the jumper settings.

3.HDD Installation

[One HDD installation]

Please insert the HDD as shown in

, and make sure the HDD is set as “MASTER”.

[Two HDDs installation]

Please insert the first HDD as shown in

, (set up the jumper as “MASTER”); insert the second HDD as shown in ,

(set up the jumper as “SLAVE”)

Caution: 1. Power off the DVR before HDD installation.

2. Jumper setting must follow the instruction of HDD manufacturer.

3. Suggested HDD spec: Maxtor or Hitachi, 7200 RPM (or above), ATA-100

Maxtor, Hitachi, and Seagate if firmware version is above V1.46.

*DVR’s Firmware version can be found in [SYSTEM MENU]



[CONFIGURATION]



[SYSTEM INFORMATION]



[S/W VERSION]

4. HDD storage 500GB (or above) is supported.

5. Don’t set the HDD as “Cable Select”, which may cause the DVR unable to record.

Page is loading ...

Security Labs SLD275 User manual

This manual is also suitable for

Security Labs SLD275 User manual

Related papers

Other documents