Security Labs SLD274 User manual

Category
Digital Video Recorders (DVR)
Type
User manual

This manual is also suitable for

4/8/16 Channel Triplex DVRs
Models SLD274 (4 CH), SLD275 (8 CH), SLD276 (16 CH),
& SLD281 (8CH DVR w 17” MONITOR)
8 Channel Triplex DVR
17” LCD Monit
15540 Herriman Blvd. Noblesville, IN 46060 - Customer Support 1-800-774-0284
www.security-labs.com
JPEG2000 DVR User Guide
-1-
Date: 1/1/2007 VER: 1.60 Security Labs, Inc. COPYRIGHT 2007 DMS-MBR
Caution ……………………………………………………………………. 3
Package Contents ……………………………………………………………………. 3
Specifications ……………………………………………………………………. 4
CHAP.1 Appearance
1-1 Stand alone DVR Front panel
introduction
……………………………………………………………………. 8
1-2 Stand alone DVR Back panel
introduction
……………………………………………………………………. 10
1-3 LCD DVR Front panel introduction ……………………………………………………………………. 11
1-4 LCD DVR Front panel introduction ……………………………………………………………………. 13
1-5 IR remote control introduction ……………………………………………………………………. 14
CHAP.2 Installation
2-1 Camera and monitor installation ……………………………………………………………………. 15
2-2 Sensor and alarm installation ……………………………………………………………………. 16
2-3 Network and serial port installation ……………………………………………………………………. 17
2-4 HDD installation ……………………………………………………………………. 19
2-5 Power connection ……………………………………………………………………. 20
CHAP.3 Operation
3-1 Display configuration ……………………………………………………………………. 21
3-2 Screen switch ……………………………………………………………………. 22
3-3 PIP view ……………………………………………………………………. 22
3-4 Freeze view ……………………………………………………………………. 22
3-5 View in sequence ……………………………………………………………………. 23
3-6 Zoom view ……………………………………………………………………. 24
3-7 Keylock ……………………………………………………………………. 24
3-8 Switch audio channel ……………………………………………………………………. 24
3-9 Record …………………………………………………………………….
25
3-10 Playback ……………………………………………………………………. 26
CHAP.4 Set up
4-1 Log-in ……………………………………………………………………. 30
4-2 Display setup ……………………………………………………………………. 31
4-3
Configuration ……………………………………………………………………. 32
4-4 Record setup ……………………………………………………………………. 40
4-5 Backup ……………………………………………………………………. 43
CONTENTS
JPEG2000 DVR User Guide
-2-
Disclaimer:
The product names mentioned in this manual are used for process identification only. The copyright of these
names may belong to other companies.
The product spec and info are for reference only, and may be updated from time to time without notification.
4-6 External device ……………………………………………………………………
44
4-7 Factory default ……………………………………………………………………
49
4-8 Language ……………………………………………………………………
49
C H AP. 5 DVD+R/CDR Backup
5-1 Data backup …………………………………………………………………… 50
5-2 Player software installation …………………………………………………………………… 51
5-3 Player software interface …………………………………………………………………… 52
CHAP.6 PTZ camera control
6-1 PTZ camera installation …………………………………………………………………… 54
6-2 PTZ camera operation …………………………………………………………………… 55
CHAP.7 Network & remote software
7-1 Network configuration …………………………………………………………………… 56
7-2 Network installation and setup …………………………………………………………………… 56
7-3 Router setup …………………………………………………………………… 59
7-4 Client software …………………………………………………………………… 61
7-5 DDNS setup and operation …………………………………………………………………… 69
Appendix
1. Record time table …………………………………………………………………… 79
2. Firmware upgrade …………………………………………………………………… 81
3. Play only mode …………………………………………………………………… 86
JPEG2000 DVR User Guide
-3-
For your safety, unplug the power before moving the DVR, installing, or replacing any parts or hard drive.
Make sure all the power cables and wires are properly set up before using the DVR. Contact your distributor
immediately if there is any noticeable defect.
To avoid a short circuit, do not place any unnecessary parts inside the DVR.
Please avoid dramatic changes of the environment such as dust, temperature, and humidity. Keep the DVR in a
temperature ranging from 41°F~104°F (5°C~40°C).
Keep the DVR in a well-ventilated place and away from any heat generating sources.
Do not block the DVRs fan and vent.
Do not expose the unit to direct sunlight.
If you have questions concerning installation and setup, please contact customer service.
Do not attempt repairs yourself. Please contact customer service for further assistance.
DVR with Hard Disk Drive
Power Supply
Power Cable
Remote Control
Manual
Software CD
Accessories
(2) AAA Batteries
Caution
Package
JPEG2000 DVR User Guide
-4-
Model Security Labs 4/8/16 CH JPEG2000 Stand alone DVRs
Video I/O
Video Input
4/8/16CH VIDEO IN 1.0 VP-P75OHM(BNC TYPE)
Video Output (BNC TYPE) X 2
VGA Output Support TFT LCD Monitor (on SLD274-6)
Audio I/O
Audio Input 4 CH Audio Input (MONO)
Audio Output 1 CH Audio output (MONO)
Monitoring Modes
Display Resolution
FULL: 720(H) × 480(V) (NTSC)
720(H) × 576(V) (PAL)
1/4: 360(H) × 240(V) (NTSC)
360(H)
×
288(V) (PAL)
Split Screen FULL/4/6/8/9/13/16 split
ZOOM IN/OUT Live & Playback
PIP Yes
Sequence Yes
Record
Playback
Resolution
FULL
NTSC-720
×
240 / PAL-720
×
288
DUAL NTSC-360×240 / PAL-360×288
QUAD NTSC-360×120 / PAL-360×144
Frame Rate
FULL
4CH: NTSC-60IPS/ PAL-50IPS
8/16CH: NTSC-120IPS/ PAL-100IPS
DUAL
4CH: NTSC-120IPS/ PAL-100IPS
8/16CH: NTSC-240IPS/ PAL-200IPS
QUAD
4CH: NTSC-240IPS/ PAL-200IPS
8/16CH: NTSC-480IPS/ PAL-400IPS
Compression JPEG2000
Quality
LOW NTSC (12 KB/720×240)/PAL(14 KB/720×288)
MID
NTSC (16 KB/720×240)/PAL(19 KB/720
×
288)
HIGH NTSC (20 KB/720×240)/PAL(24 KB/720×288)
SUPER
NTSC (24 KB/720×240)/PAL(29 KB/720
×
288)
HYPER NTSC (28 KB/720×240)/PAL(32 KB/720×288)
Storage Device Hard Disk Drive (EIDE, LBA mode, 3.5”, 7200RPM)
Audio Recording
Bit rate NTSC: 120kb/sec PAL: 100kb/sec
JPEG2000 Standalone DVR Specification
JPEG2000 DVR User Guide
-5-
Playback
Modes
Search Percentage/ Time & Date /Event
Jog Shuttle Dual Knob
Frame Advance Forward / Reverse
Fast Forward
Fast Rewird
x2, x4, x8, x16, x32, x60(NTSC)
x2, x4, x8, x15, x25, x50(PAL)
Slow Forward/Rewind 1/2,1/4,1/8,1/16
Pause Available
Network
Protocol TCP/IP
Remote monitoring
Remote Software: Remote live view, playback, and save as .AVI file.
IE: Remote live view, backup, and save backup to .AVI file.
Users Two simultaneous user access.
Back-up
Backup method Video out to VCR, Backup via IE, DVD+R, CDR backup
PTZ Control RS485 with most popular protocols
RS232 Controls DVR host through RS232
Alarm Inputs
4CH: 4 Alarm Inputs
8CH: 8 Alarm Inputs
16CH: 16 Alarm Inputs
Alarm Output 1 output with programmable duration
Remote Control Infrared Remote Control
Control Devices Front Panel, IR Remote Control, RS232
Multi-language English / Spanish / Portuguese / German / French
HDD 1or 2 HDDs ( i.e. 2 x 500Gb = 1 terabyte)
Mechanism
Temperature
Operates between 41°F~104°F (5°C~40°C)
Humidity Keep Under 90%
Dimensions 16.9” (W) x 18” (D) x 4”(H)
Weight 17.6 lbs. (w/o HDD)
Power Supply 100-240VAC@ 2A 50/60Hz to DC 12V @ 8Amp output
JPEG2000 DVR User Guide
-6-
Model Security Labs 8 CH JPEG2000 Series LCD DVR
Video I/O
Video Input
8CH VIDEO IN 1.0 VP-P75OHM(BNC TYPE)
Video Output (BNC TYPE) X 2
Audio I/O
Audio Input 4 CH Audio Input (MONO)
Audio Output 1 CH Audio output (MONO)
Monitoring Modes
Display Resolution
FULL: 720(H) × 480(V) (NTSC)
720(H) × 576(V) (PAL)
1/4: 360(H) × 240(V) (NTSC)
360(H)
×
288(V) (PAL)
Split Screen FULL/4/6/8/9 split
ZOOM IN/OUT Live & Playback
PIP Yes
Sequence Yes
Record
Playback
Resolution
FULL
NTSC-720
×
240 / PAL-720
×
288
DUAL NTSC-360×240 / PAL-360×288
QUAD NTSC-360×120 / PAL-360×144
Frame Rate
FULL
4CH: NTSC-60IPS/ PAL-50IPS
8CH: NTSC-120IPS/ PAL-100IPS
DUAL
4CH: NTSC-120IPS/ PAL-100IPS
8CH: NTSC-240IPS/ PAL-200IPS
QUAD
4CH: NTSC-240IPS/ PAL-200IPS
8CH: NTSC-480IPS/ PAL-400IPS
Compression JPEG2000
Quality
LOW NTSC (12 KB/720×240)/PAL(14 KB/720×288)
MID
NTSC (16 KB/720×240)/PAL(19 KB/720
×
288)
HIGH NTSC (20 KB/720×240)/PAL(24 KB/720×288)
SUPER
NTSC (24 KB/720×240)/PAL(29 KB/720
×
288)
HYPER NTSC (28 KB/720×240)/PAL(32 KB/720×288)
Storage Device Hard Disk Drive (EIDE, LBA mode, 3.5”, 7200RPM)
JPEG2000 LCD DVR Specification
JPEG2000 DVR User Guide
-7-
Playback
Modes
Search Percentage/ Time & Date /Event
Jog Shuttle Dual Knob
Frame Advance Forward / Reverse
Fast Forward
Fast Rewind
x2, x4, x8, x16, x32, x60(NTSC)
x2, x4, x8, x15, x25, x50(PAL)
Slow Forward/Rewind 1/2,1/4,1/8,1/16
Pause Available
Network
Protocol TCP/IP
Remote monitoring
Remote Software: Remote live view, playback, and save as .AVI file.
IE: Remote live view, backup, and save backup to .AVI file.
Users Two simultaneous user access.
Back-up
Back-up method Backup via IE and USB Drives.
PTZ Control RS485 with most popular protocols
RS232 Controls DVR host through RS232
Alarm Inputs 8CH: 8 Alarm Inputs
Alarm Output 1 output with programmable duration
Remote Control Infrared Remote Control
Control Devices Front Panel, IR Remote Control, RS232
Multi-language English / Spanish / Portuguese / German / French
HDD 1or 2 HDDs ( i.e. 2 x 500Gb = 1 terabyte)
LCD
LCD Panel Diagonal: 17.0” TFT, Input: TTL / LVDS.
Display Resolution 1024 x 768
LCD Color Resolution 16.7 M (8 bits)
LCD Pixel Pitch 0.297mm (H) x 0.297mm (V)
LCD Brightness 300 cd/m2
Mechanism
Temperature
Operates between 41°F~104°F (5°C~40°C)
Humidity Keep Under 90%
Dimension 420mm(W) x 159mm(D) x 425mm(H)
Weight 8 KG (w/o HDD)
Power Supply 100-240VAC@ 2A 50/60Hz to DC 12V @ 8Amp output
JPEG2000 DVR User Guide
-8-
1-1 Standalone DVR Front panel introduction
1.[DVD+R]
Built-in DVD+R / CDR for backup.
2.[USB Port]
Connect PC for firmware upgrade.
HOST: Connect USB memory stick for backup.
3.[IR Receiver & LED Lamps]
IR Remote Control Receiver.
DVR Status LED:
RUN- Flashes when using Jog Shuttle.
ACTIVE- On when the Jog Shuttle is ready to use.
REC- On while recording and flashes during stand-by mode.
PLAY- On during playback.
FULL- On when HDD storage is full.
NET- On when the unit is connected to a LAN or WAN.
4.[1~16 Channel Buttons]
Switches each channel to full screen view (1 for Channel 1, 2 for Channel 2, etc.).
5.[MODE]
Select full and split screen displays.
6.[K.LOCK]
Locks the buttons on the front panel.
7.[MENU]
Enters the menu and set up.
8.[Directions & ENTER]
Directions- Navigates the menus.
ENTER- Confirms selected options.
9.[Jog Shuttle]
During playback the inner knob advances picture by picture. Turn the outer rim clockwise to play fast forward,
and counterclockwise to play fast reverse.
Also use the Jog Shuttle control to change values in system set-up menus.
CHAP.1 Appearance
JPEG2000 DVR User Guide
-9-
10.[PTZ]
Press [PTZ] to enter the PTZ control mode. Press the PTZ buttons to control the PTZ camera directly.
11.[+ / -]
Adjust set-up value.
Adjust display order of channels.
12.[Control]
SEQ/AUDIO- Press quickly for AUDIO, and press and hold for 3 seconds to enter SEQ mode.
SEQ - Full screen sequencing or smaller screen sequencing in PIP mode.
AUDIO- Press to play audio and press again to go to the next audio channel.
PIP- To enter the Picture in Picture mode from full screen mode.
NEXT- Go to the next PTZ command in PTZ mode.
Go to the next channel in full screen display and the next page in split screen display.
ZOOM- To enlarge the picture. Use the direction buttons to move to the area to be enlarged.
13.[REC]
To quickly activate Emergency / Panic Record into continuous record mode with Super Fine quality and Best
resolution. Press STOP to exit the Emergency / Panic Record mode.
14.[STOP]
Stop emergency recording and return to the record schedule programmed in Record Setup menu.
Stop playback and return to the LIVE mode.
15.[SEARCH]
Enters Search dialog window to search by percentage, date / time, or the event list.
16.[PLAY]
Plays recorded data beginning from the end of the previous playback.
17.[FREEZE]
Freeze in full screen or split screen
18.[JOG SHUTTLE Button]
Activates the Jog Shuttle function. Press again to deactivate.
JPEG2000 DVR User Guide
-10-
1-2 Standalone DVR Back panel introduction
[4Channel]
[8Channel]
[16Channel]
1.[RS485, Relay Output, Sensor Input]
RS485, for connection to PTZ cameras.
16 sensor inputs and 1 relay output.
2.[VGA Output]
Connection to a VGA monitor or TFT LCD.
3.[ETHERNET]
Connection to Ethernet device.
4.[RS-232C]
Connection to PC or other DVR control devices.
5.[1~16 Camera Input/LOOP Output]
CAMERA IN- channel 1~16 camera input.
LOOP- channel 1~16 camera loop out
6.[Monitor / SPOT Output]
MONITOR- Connection to monitor.
SPOT- second monitor output. Once alarm or motion is triggered, it will pop up automatically or display in
sequence according to the set up.
7.[Power Input]
DC power input (DC12V)
8.[Power Switch]
Power ON/OFF
9.[Audio Input/Output]
Audio input 1~4 channel and Audio output 1 channel.
JPEG2000 DVR User Guide
1-3 LCD DVR Front panel introduction
<Front> <Back> <Side>
1.[LCD monitor power switch]
Powers Display Monitor ON/OFF. Please note the DVR is still runs even though the monitor is turned off.
2.[IR Receiver & LED Lamps]
IR Remote Control Receiver.
DVR Status LEDs:
REC- On while recording and flashes during stand-by mode.
FULL- On when HDD storage is full.
PLAY- On during playback.
NET- On when the unit is connected to a LAN or WAN.
RUN- Flashes when using Jog Shuttle.
ACTIVE- On when the Jog Shuttle is ready to use.
JPEG2000 DVR User Guide
-12-
3.[Control]
MODE - Select full and split screen displays.
SEQ/AUDIO - Press quickly for AUDIO, or press and hold for 3 seconds to enter SEQ mode.
SEQ - Full screen sequencing or smaller screen sequencing in PIP mode.
AUDIO - Press to play audio. Press again to go to the next audio channel.
PIP - Enters the Picture in Picture mode from full screen mode.
ZOOM - Enlarges the picture. Use the direction buttons to move to the area to be enlarged.
FREEZE -
Freeze in full screen or split screen.
LOCK - Lock the buttons on front panel.
PTZ - Press to enter the Pan / Tilt / Zoom control mode.
NEXT - Go to the next command in the PTZ mode.
Go to the next channel in full screen display, or the next page in split screen display.
4.[1~8 Channel Buttons & PTZ control buttons]
Switches each channel to full screen view (1 for Channel 1, 2 for Channel 2, etc.).
In PTZ control mode, Press the PTZ buttons to control your PTZ camera directly.
5.[Record and Playback ]
Panic REC - To quickly activate Emergency / Panic Record into continuous record mode with Super Fine quality
and Best resolution. Press STOP to exit the Emergency / Panic Record mode.
STOP - Stop emergency recording and return to the record schedule programmed in Record Setup menu..
- Stop playback and return to the LIVE mode.
SEARCH -
Enter the Search dialog window to search by percentage, date / time, or the event list.
PLAY - Plays recorded data beginning from the end of the previous playback.
6.[MENU]
Enters the menu and set up.
7.[+ / -]
Adjust set-up value.
Adjust display order of channels.
8.[J.SHUTTLE Button]
Activates the Jog Shuttle function. Press again to deactivate.
9.[Directions & ENTER]
Directions- Navigates the menus.
ENTER- Confirms selected options.
10.[Jog Shuttle]
During playback the inner knob advances picture by picture. Turn the outer rim clockwise to play fast forward,
and counterclockwise to play fast reverse.
Also use the Jog Shuttle control to change values in system set-up menus.
11.[Speaker]
Audio output
JPEG2000 DVR User Guide
-13-
1-4 LCD DVR Back panel introduction
[8CH DVR]
1.[RS-232C]
Connection to PC or other DVR control devices.
2.[RS485, Relay Output, Sensor Input]
RS485, for connection to PTZ cameras.
16 sensor inputs and 1 relay output.
3.[ETHERNET]
Connection to Ethernet device.
4.[Audio Input/Output]
Audio input 1~4 channel and Audio output 1 channel.
5.[1~8 Camera Input/LOOP Output]
CAMERA IN- channel 1~8 camera input.
LOOP- channel 1~8camera loop out
6.[Monitor / VCR Output]
MONITOR- Connection to monitor.
VCR- Connection with VCR for analog backup.
7.[Power Switch]
Power ON/OFF the LCD DVR.
8.[Power Input]
DC power input (DC12V).
9.[REMOVABLE HDD RACK]
To Connect HDD.
10.[USB Port]
USB Backup-Connect USB memory stick or USB HDD for backup.
DEVICE- Connect PC for firmware upgrade.
11.[ Audio Volume Tuner]
Adjust the audio volume.
JPEG2000 DVR User Guide
-14-
1-5 IR remote controller introduction
1.[MENU]
Enter menu or exit
2.[Split /OSD]
4S: 4 split
9S: 9 split
16S: 16 split
AUDIO: Press to play the audio.Press again to go to the next audio channel.
3.[1~16 Channel]
Switch channel in live or playback; also used for password entering.
4.[Control function]
FRZ- Freeze the screen in display
SEQ- Automatically display full screen or split screen in sequence
ZOOM- To enlarge the picture. Use the direction buttons and move to
the area to be enlarged.
PIP- Picture in Picture. Enter PIP mode in full screen
5.[Mode/PT]
MODE- Multi-screen display selection
P/T- Enter the PTZ camera control mode
6.[SEARCH/-/+/NEXT]
SEARCH- Open the search window in playback
[-]/[+]- For value adjustment in set-up
NEXT- Go to the next PTZ command in PTZ mode.
Go to the next channel in full screen display and the next page in split screen display
7.[Rec]
To quickly activate Emergency / Panic Record into continuous record mode with Super Fine quality and Best
resolution. Press STOP to exit the Emergency / Panic Record mode.
8.[Stop]
Stop the emergency recordand return to the record schedule programmed in the Record Setup.
Stop playback and return to the LIVE mode.
9.[Functions]
PLAY- Play the recorded data directly.
PAUSE- Pause playback.
REW- Fast rewind, press again to select the speed.
FF- Fast forward, press again to select the speed.
STEP- Play picture by picture.
SLOW- Slow motion playback, press again to select the speed.
10.[ENTER]
Select or adjust options in setup.
11.[Direction]
Navigate the menu.
JPEG2000 DVR User Guide
-15-
2-1 Camera and monitor installation
2-1-1 Camera installation
Connect camera(s) to camera in CH1~CH16
Please do not power up the DVR before the
camera(s) are connected.
2-1-2 Monitor and SPOT installation
Monitor: Connect the MONITOR port on the DVR back panel to the video inport on the monitor.
SPOT- second monitor output. Once an alarm input or motion is triggered, cameras will pop up automatically or
display in sequence according to the set up menu.
2-1-3 Loop out installation
To monitor a single channel, connect the loop outof
the corresponding channel to a monitor.
To always record a specific channel individually,
connect the loop outof the corresponding channel to
a DVR, VCR, or other recording device.
CHAP.2 Installation
JPEG2000 DVR User Guide
-16-
2-2 Sensor and alarm installation
2-2-1 Input & Output
[4Channel]
[8Channel]
[16Channel]
1.[D1~D16 Alarm Input/GND Locations]
16 Sensor inputs.
2.[Relay Output NO/NC/COM]
Relay output is NO+COM and NC+COM
2-2-2 Sensor installation
Alarm will be triggered once one (or more than one) alarm input (D1~D16) causes short circuit or open circuit
with GND.
JPEG2000 DVR User Guide
-17-
2-2-3 Relay output installation
Alarm output can be NO or NC.
NO-COM: the NO and COM terminals = open-circuit, closes when an alarm is triggered.
NC-COM: the NC and COM terminals = closed-circuit, opens when an alarm is triggered.
2-3 Network and serial port installation
2-3-1 Network setup
Connect the network cable to Etherneton back panel.
Ethernet Setup between ADSL and Cable is different. For details, please refer to Ch. 7-2 Network installation.
2-3-2 Serial port setup
You are able to connect the COM port of a PC or other device to the DVR through RS232.
RS232 settings (baudrate/ parity/ length/ stop bit ) are NOT adjustable.
The transmission baud rate is 19,200bps, length 8 bits, stop bit 1, and the parity is none.
ASCII-CODE is 1 BYTE.
JPEG2000 DVR User Guide
-18-
# 2 RxD
# 3 TxD
# 5 GND
TxD
# 3
GND # 5
RxD # 2
DVMR unit Other device (PC)
D-SUB 9 cable (twisted RS-232C cable)
To connect your DVR to a PC, you must use an RS232 cable as illustrated below:
2-3-3 PTZ camera installation
Please connect the PTZs D+ to the DVRs D+ , and D- to D-.
After the connection and the related setup is done, you can control your PTZ camera via the front panel
buttons.
2-3-4 Microphone and Speaker installation
[Audio input]
MIC to the audio input (IN1~IN4) to record audio.
connector
description
1
DCD
2
RxD
3
TxD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
NC
ASCII-CODE
Func.
CODE
Func.
CODE
Func.
CODE
Func.
CODE
Func.
CODE
REC R RIGHT K MODE D CH3 3 CH11 !
STOP S NEXT N PIP I CH4 4 CH12 @
PLAY P ENTER 0X0D SEQ Q CH5 5 CH13 #
SEARCH E - < J.SHU L CH6 6 CH14 $
MENU M + > KLOCK C CH7 7 CH15 %
UP U PTZ T QPLAY Y CH8 8 CH16 ^
DOWN J ZOOM Z CH1 1 CH9 9
LEFT H FRZ F CH2 2 CH10 0
Tip: Use an Amplifier to obtain a better sound recording.
JPEG2000 DVR User Guide
-19-
[Audio output]
Connect an amplified speaker to the audio output. DVR can play
audio during live view and playback.
2-4 HDD installation
[Steps]
1. Disassemble the bolts as illustrated.
2.Jumper setting
Set up the HDD as MASTER or SLAVE. Please
refer to the HDD manual of the jumper settings.
3.HDD Installation
<Standalone DVR> <LCD DVR>
[One HDD installation]
Please insert the HDD as shown in
, and make sure the HDD is set as MASTER.
[Two HDDs installation]
Please insert the first HDD as shown in
, (set up the jumper as MASTER); insert the second HDD as shown in ,
(set up the jumper as SLAVE)
Caution: 1. Power off the DVR before HDD installation.
2. Jumper setting must follow the instruction of HDD manufacturer.
3. Suggested HDD spec: Maxtor or Hitachi, 7200 RPM (or above), ATA-100
Maxtor, Hitachi, and Seagate if firmware version is above V1.46.
*DVRs Firmware version can be found in [SYSTEM MENU]
[CONFIGURATION]
[SYSTEM INFORMATION]
[S/W VERSION]
4. HDD storage 500GB (or above) is supported.
5. Dont set the HDD as Cable Select, which may cause the DVR unable to record.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88

Security Labs SLD274 User manual

Category
Digital Video Recorders (DVR)
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI