AKF 617
PRODUCT DESCRIPTION SHEET
IT
5020 519 66007
Operation of burners with safety
device and electric ignition
To light one of the burners:
• Press the relative knob and turn it anti-
clockwise to the large flame and star
setting .
• At the same time, hold the knob down until
the burner ignites.
• After the burner has ignited, keep the knob
pressed down for about 10 seconds.
• Release the knob.
If the burner fails to light, repeat the above steps.
Note:
—
Should particular local conditions of the
delivered gas make ignition of the burner
difficult, it is advisable to repeat the operation
with the knob turned to the small flame
setting .
—
The burner safety device shuts off the gas
supply to the burner if the flame goes out
accidentally (because of a sudden draught, an
interruption in the gas delivery, boiling over of
liquids, etc.).
3
2
1
6
5
7
8 9 10 11
4
1.
Removable panstand grids
2.
Small burner
3-4.
Large burners
5-6.
Medium burners
7.
Small burner control knob
8.
Large burner control knob
9.
Large burner control knob
10.
Semi-Rapid Burner control knob
11.
Semi-Rapid Burner control knob
Symbols
Shadedcircl
e
tap closed
Large flame
and star
Maximum opening/
delivery and electric
ignition
Small
flame
Minimum opening
or reduced delivery