Page is loading ...
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA
Customer Service: 1-800-359-5520 • [email protected] • www.sanus.com
CFA56
(6901-100095 <02>)
Thank you for choosing Sanus Systems Component Furniture. The CFA56 is designed to house
components weighing up to 18.1 kg (40lbs) on the top shelf, 22.6 kg (50 lbs) on the middle shelf, and 34
kg (75 lbs) on the bottom shelf.
Do not use this product for any purpose not explicitly specied
by Sanus Systems. Improper assembly may cause property
damage or personal injury. If you do not understand these
directions, or have doubts about the safety of the assembly,
contact Sanus Systems Customer Service or call a qualied
contractor. Sanus Systems is not liable for damage or injury
caused by incorrect assembly or use.
CAUTION
6901-100095 <02>
Supplied Parts and Hardware
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not
return the item to your dealer; contact Sanus Systems Customer Service. Never use damaged parts!
This product contains small items that could be a choking hazard if swallowed. Keep these items away
from young children!
WARNING
OPT
OPT
Hardware and procedures for multiple assembly options are included. When you see this symbol,
choose the correct configuration to suit your needs. Not all hardware included will be used.
6901-100095 <02>
6500-000093-XXX
[04] x 1
6500-000095-XXX
[06] x 1
6500-000097-XXX
[01] x 1
[02] x2
6600-000025-XXX
[05] x 3
[09] x 2
[03] x 1
[18] x 1
[19] x 8
[28] x 4
[21] x 12
[12] x 4
[20] x 4
[10] x 2
[14] x 1
[13] x 1
M8
[30] x 4
1/4-20 x 1 1/4
[23] x 2
[22] x 4
[17] x 4
[11] x 4
#6 x 5/8
[27] x 6
8-32 x 1
[25] x 1
1/4 - 20 x 1 1/2
[24] x 1
[29] x 4
[16] x 3
[15] x 3
[26] x 6
8204-000038-XXX
M5
[31] x 1
8204-000029-XXX
5/32
[32] x 1
[07] x 1
[08] x 2
6901-100095 <02>
1
OPT
OPT
[02]
[02]
[30]
[12]
[29]
[11]
6901-100095 <02>
2
90
o
[08]
[19]
4x
90
o
6901-100095 <02>
2.1
[19]
[08]
Back Braces (8) must
be inserted as shown.
Once in place, be sure
the bottom braces are
even with the tops of
the feet, and the top
braces with the tops of
the sides.
CAUTION
180
o
180
o
4x
6901-100095 <02>
3
[09]
Front braces (9) must be inserted
slot-down, as shown. Once in place,
be sure the bottom braces are even
with the tops of the feet, and the top
braces with the tops of the sides.
CAUTION
[09]
[32]
6901-100095 <02>
4
[07]
[28]
4x
6901-100095 <02>
5
Vibration Dampening Shelf
[17]
[06]
[22]
[06]
4x
4x
6901-100095 <02>
5.1
[21]
[05]
6901-100095 <02>
[15]
[27]
[18]
[25]
6
6901-100095 <02>
[26]
[16]
7
Note: Door and hinges can be placed on
either side of the cabinet.
6901-100095 <02>
[15]
[16]
8
Note: Door and hinges can be placed on
either side of the cabinet.
6901-100095 <02>
+ 0.5 MM
- 3.5 MM
- 0.5 MM
+ 2.5 MM
+/- 1.5 MM
+ 0.5 MM
- 3.5 MM
- 0.5 MM
+ 2.5 MM
+/- 1.5 MM
Side Adjustment
Depth Adjustment
Height Adjustment
8.1
6901-100095 <02>
[24]
[13]
[14]
[23]
[10]
9
6901-100095 <02>
10
Note: Back Brace (08) may need to be adjusted.
[01]
6901-100095 <02>
11
[20]
[04]
[20]
11.1
[04]
6901-100095 <02>
CSAV, Inc. and its affiliated corporations and subsidiaries (collectively, “CSAV”), intend to make this manual accurate and complete. However, CSAV makes no claim that the information
contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information
contained in this document is subject to change without notice or obligation of any kind. CSAV makes no representation of warranty, expressed or implied, regarding the information
contained herein. CSAV assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
/