Sanus Systems Car Video System LA112 is a motorized mount for flat-panel monitors, supporting screens from 40 to 63 inches and weighing up to 180 lbs. It extends up to 12 inches from the wall and features remote control for easy adjustment. Safety features include a grounded connection, protective covers, and motion-activated auto-stop. Installation requires attaching the wall plate, mounting brackets, and connecting the IR receiver. The LA112 allows you to conveniently position your TV for optimal viewing angles, making it a great choice for home entertainment systems.
Sanus Systems Car Video System LA112 is a motorized mount for flat-panel monitors, supporting screens from 40 to 63 inches and weighing up to 180 lbs. It extends up to 12 inches from the wall and features remote control for easy adjustment. Safety features include a grounded connection, protective covers, and motion-activated auto-stop. Installation requires attaching the wall plate, mounting brackets, and connecting the IR receiver. The LA112 allows you to conveniently position your TV for optimal viewing angles, making it a great choice for home entertainment systems.
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA
Customer Service: 1-800-359-5520 • [email protected] • www.sanus.com
LA112
(6901-100189 <01>)
Thank you for choosing the Sanus Systems LA112 motorized mount. The LA112 is a remote-controlled automated
mount for flat panel monitors designed to be fully adjustable. The LA112 supports flat panel monitors with a
maximum weight of 81 kg (180 lbs.), ranging in size from 40 in. – 63 in. (102 cm – 106 cm). The LA112 extends up to
12 in (30 cm) from the wall.
Do not use this product for any purpose not explicitly specified by Sanus Systems. Improper installation may
cause property damage or personal injury. If you do not understand these directions, or have doubts about
the safety of the installation, contact Sanus Systems Customer Service or call a qualified contractor. Sanus
Systems is not liable for damage or injury caused by incorrect mounting, assembly, or use.
CAUTION
Backed by CLO
6901-100189 <01>
Supplied Parts and Hardware
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item
to your dealer; contact Sanus Systems Customer Service. Never use damaged parts!
This product contains small items that could be a choking hazard if swallowed. Keep these items away from
young children!
WARNING
1/8 in. 1/2 in.
Determine if your monitor will require adapters to fit the LA112. Measure the distance between the mounting holes on the
back of the monitor.
Measure width
between holes
Measure height
between holes
Adapters are not included with the LA112. If you need an adapter, contact Sanus Systems Customer Service at
1-800-359-5520 or email us at info@sanus.com. You may also visit our website: www.sanus.com
OPT
OPT
For monitors with hole patterns less than 21.5 inches (54.6 cm) wide, install Cross Plate adapters.
For monitors with hole patterns 26 - 34.5 inches (66 - 87.6 cm) wide, install Bar Extension
adapters.
For monitors 18.5 - 27.5 inches
(47 - 70 cm) high, install
Bracket Extension adapters.
3/8
6901-100189 <01>
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
[09] x 1
[06] x 1
[08] x 1
[10] x 6
[11] x 6
001602.eps
VM400 - Hardware
5/16 in. 5/16 x 2.5 in.
M4 x 12mm
M5 x 12mm M6 x 12mm
M4 x 30mm M5 x 30mm
M6 x 35mm
M4 M5
M6
M4 / M5
M6
M4 / M5
M6 / M8
[27] x 1
[07] x 1
M5 x 16 mm
[12] x 4
M5 x 30mm
[13] x 4
M6 x 35mm
[15] x 4
[26] x 10
M8 x 35mm
[17] x 4
M8
[20] x 4
M6
[22] x 4
M8x20
[16] x 4
M6 x 18mm
[14] x 4
M4/M5
[18] x 4
M6 / M8
[19] x 4
M5
[21] x 4
M8
[23] x 4
M4/M5
[24] x 4
M6/M8
[25] x 4
[05] x 2
[04] x 4
[03] x2
[02] x 1[01] x 1
NOTE: Items [1] through [4] are pre-assembled.
6901-100189 <01>
Avoid potential injuries or damage to equipment! Always observe the LA112 while in motion. To stop the
motion, press any of the arrow keys on the remote control. Never allow children to operate the LA112.
CAUTION
Avoid potential injuries or damage to equipment! Do not operate the LA112 unless all protective covers and
guards are in place. Keep away from moving parts.
CAUTION
Avoid damage to equipment! Use only accessories distributed or recommended by Sanus Systems. Do
not operate the LA112 if the appliance has malfunctioned, or has been damaged in any way; return to an
authorized service facility for inspection.
CAUTION
Avoid potential injuries or damage to equipment! The LA112 must be connected to a grounded outlet.
Disconnect the LA112 when not in use, or before cleaning or servicing the unit. To disconnect the LA112, turn
off all controls then remove the plug from the outlet.
CAUTION
Avoid potential injuries or damage to equipment. The LA112 is designed to mount to vertical walls only.
Do not attempt to mount the LA112 to ceilings or non-vertical walls. For indoor use only! Do not mount
outdoors.
CAUTION
Do not unplug by pulling on cord. To uplug, grasp the plug, not the cord.
CAUTION
6901-100189 <01>
1: Remove Wall Plate from Arm
The LA112 is shipped with the wall plate and arm
assembled. You must remove the wall plate before
installation.
Loosen the two fasteners [A] securing the wall
plate [01] to the arm assembly [02].
Tilt the wall plate away from the arm assembly
then lift the wall plate to disengage it from the
hooks [B].
[A]
[02]
[01]
[B]
6901-100189 <01>
2: Remove Mounting Brackets
[27]
P1
P3
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
P2
P4
P1
P3
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
P2
P4
[A]
[03]
[04]
You must remove the two TV Mounting Brackets from the LA112 before attaching the arm to the wall plate.
Remove the hex screws [A] from the mounting brackets [03]. Pull the safety clips [04] from the back of the mounting brackets,
then remove the mounting brackets from the arm assembly.
[27]
6901-100189 <01>
3: Mount Wall Plate
For Wood Stud Walls
Max. 43 cm (17 in.)
Min. 6.5 cm (2.5 in.)
1/8 in.
6x
6x
6x
2x
[01]
[10]
6901-100189 <01>
For Concrete Block or Brick Walls
1/2 in.
Min. 6.5 cm (2.5 in.)
6x
6x
6x
6x
Avoid potential injuries and / or property damage!
Never drill into the mortar between concrete blocks!
CAUTION
[10]
[01]
[11]
6901-100189 <01>
4: Install Arm Assembly to Wall Plate
Hang the arm assembly [02] over the top rail of the wall plate
[01]. Be sure both hooks on the arm assembly engage with the
rail.
Align the arm assembly to the desired location on the wall
plates. Secure the bottom of the arm assembly to the wall
plate by tightening the two fasteners [A] at the bottom of
the arm assembly.
[02]
[01]
[A]
6901-100189 <01>
5: Set the Monitor Width
Avoid potential injuries and / or property damage! Do
not use the monitor manufacturer’s “screen size”; you
must measure the width of the monitor case, including
any speakers attached to the sides.
CAUTION
Set
Measure monitor width,
including any speakers
C1 102 - 113 cm (40 - 44.9 in.)
C2 114 - 123 cm (45 - 48.9 in.)
C3 124 - 140 cm (49 - 55.9 in.)
C4 141 - 155 cm (56 - 61.0 in.)
CODE WIDTH
To set the monitor width, determine the correct code from
the chart below.
Insert the power cord [08] into the plug on the arm assembly,
then connect the power cord to a grounded outlet.
Turn the power switch [A] to the ON position. Insert the
selector pin [07] into the receptacle [B] and press until the
correct code is displayed.
Press and hold the “Set” button [C] until the display stops
blinking to accept the code.
Set
[07]
[08]
[A]
Selector
Set
[B]
[C]
The LA112 restricts movement based up on the TV
widteh set on the side controls. The TV widthe must be
set correctly before operating the LA112.
CAUTION
6901-100189 <01>
6: Install Mounting Brackets
[12, 13, 14,
15, 16, 17]
[18, 19, 20]
[03]
Top
Circular holes and hook
[21, 22, 23]
If your television came with mounting bolts use those. If
not, select bolts from those supplied with your LA112. Bolts
selected must match the manufacturer’s recommendations.
CAUTION
[06]
P1
P3
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
P2
P4
Connect the IR receiver cable [06] to the receiver port on the arm assembly.
On the remote control [09], press the “X-ARM” button to activate the remote. Then press the “SEL-IN/OUT” button once to
extend the arm.
6.1
6901-100189 <01>
7: Route Cables
For Power Outlets Located Outside the Bellows
Route the AV cables [A] over the bottom cross bar, through one of the cable loops [B], then through the
cable access port at the back of the arm assembly. Route the power cord [07] over the bottom cross bar,
through the opposite cable loop [B], then through the cable access port at the bottom of the arm assembly.
Disconnect the plug end of the IR receiver cable [06] and route the cable over the bottom cross bar, through
one of the cable loops [B], then through the access port at thebottom of the arm assembly.
Secure the cables to the bottom cross bar with cable ties [26] as shown. Be sure to keep all cables at least
5cm (2 in.) away from the center beam!
Check that the cables are long enough to allow free movement of the arm assembly, but are not long
enough to get caught in the mechanical parts of the arm assembly. Using the remote, adjust the arm up,
down, and side to side through its full extension. Secure the cables to the cable bar [C] at the back of the
arm assembly.
Avoid potential property damage! Keep all cables away
from the center beam of the arm assembly. Do not place
cables closer than 5cm (2 in.) on either side of the beam.
CAUTION
[A]
[26]
AV Cables
to TV
AV Cables from
Component
TV Power Outlet
(outside bellows)
Power
to TV
IR Reciever Eye
IR Reciever
Plug
Cable Loops
Bellows
No Cable
2” (5 cm)
No Cable
2” (5cm)
Cable Bar
Bottom Cross Bar
Cable Hole
Cable Tie Anchor
[07]
[06]
[B]
[C]
6901-100189 <01>
For Power Outlets Located Inside the Bellows
[06]
[08]
Route the AV cables over the bottom cross bar, through the left cable loop [A], then through the cable
access port at the bottom of the arm assembly.
Route the power cord [08] over the bottom cross bar, through the opposite cable loop [B], then through the
cable access port at the bottom of the arm assembly. Disconnect the plug end of the IR receiver cable [06]
and route the cable over the bottom cross bar, through the right cable loop [B], then through the access
port at the back of the arm assembly.
Secure the cables to the bottom cross bar with cable ties [26] as shown. Be sure to keep all cables at least
5cm (2 in.) away from the center beam!
Check that the cables are long enough to allow free movement of the arm assembly, but are not long
enough to get caught in the mechanical parts of the arm assembly. Using the remote, adjust the arm up,
down, and side to side through its full extension. Secure the cables to the cable bar [C] at the back of the
arm assembly.
Avoid potential property damage! Keep all cables away
from the center beam of the arm assembly. Do not place
cables closer than 5cm (2 in.) on either side of the beam.
CAUTION
[B]
[A]
[C]
AV Cables
to TV
AV Cables from
Component
TV Power
Cord
AV Cable Loop
Bellows
No Cable
2” (5 cm)
No Cable
2” (5 cm)
Cable Bar
Cable Hole
Bottom Cross Bar
IR Receiver Eye
TV Power outlet
inside belows.
Cable Tie Anchor
TV Power &
IR Receiver Hook
6901-100189 <01>
8: Install Monitor to Wall Plate
HEAVY! You will need assistance
with this step.
[27]
Position the hooks at the top of the mounting
brackets over the top cross bar [A].
Guide the bottom of the mounting brackets down
and towards the arm assembly until the brackets
engage with the bottom cross bar.
Install the four safety clips [04] as shown. Secure the
safety clips with the fasteners [B].
[B]
[B]
[04]
[A]
6901-100189 <01>
9: Calibrate the Arm
Calibrate Arm to the Monitor
NOTE: LA112 must be calibrated to the TV to avoid hitting the wall.
Reset the LA112 Home Position
1. Turn the control box power switch to “Off”.
2. While holding down the “Set” button, turn the control box power switch back on and continue to hold Set until “Ct” appears in
the LED display.
3. Stand away from the LA112 as it calibrates. LA112 will move back to the home position against the wall when calibration is
complete.
4. If your TV is not parallel with the wall, proceed to the next section, “Reset the LA112 to Home Position”.
1. Move the X-arm to its home position against the wall by pressing the “SEL-IN/OUT” button on the remote control.
2. Insert the pointer into the control box Selector hole and press the “SET” button until the display reads “HP”.
3. Adjust the X-arm to the desired home position using the arrow keys on the remote control.
4. Press and hold the control box “Set” button for three seconds. Now the X-arm will move to the new home position each time
the “SEL-IN/OUT” button on the remote control is pushed.
Adjust Monitor Position
1. Turn the control box power switch to “On”.
2. Press the “X-arm” and the the “Power” keys on the remote control.
3. If the TV width code is not displayed on the control box, press “POWER” on the remote. Then press “SEL-IN/OUT” once to
extend the TV out from the wall. There is no need to hold down the button. Pressing any of the arrow buttons while LA112 is
moving the TV will stop it.
4. Use the remote control arrow keys to move the TV in the desired direction. To stop movement, press any of the arrow keys or
the “SEL-IN/OUT” key.
Avoid property damage and personal injury. Set the correct width for your TV before using the LA112. See the “Setting
LA112 TV Width” section above to set the correct width for your TV. While the LA112 is in motion keep people and objects
away from it and do not leave it unattended.
CAUTION
6901-100189 <01>
10. Using the
Remote Control
Select the desired device.
Sets the P1 or P2 Preset position to the
current X-Arm position.
Moves LA112 to the selected preset
position.
In X-arm mode: Tilt the TV.
In TV, DVD and CBS modes: Navigate
on-screen menu of selected device.
Opens the setup menu for the selected
device.
Adjusts the volume up or down.
Turns the sound off for the selected
device.
Displays information about the current
video source.
Returns to the previous channel.
Rewind, play, fast-forward, pause, stop,
and record functions for videos.
TV
VCR
DVD
CBL
X-ARM
SET
p1
p
r
e
s
e
t
p2
p3
p
r
e
s
e
t
p4
menu
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Turns on the Picture in Picture feature.
In CBL mode: Moves the page down.
In PIP mode: Changes the position of
the PIP window.
Switches the PIP and background
video sources.
In X-arm mode: Returns LA112 to
home position.
In TV, DVD and CBL modes: Selects or
sets options.
Leaves the current menu.
Changes to the next or previous
channel or chapter.
In CBL mode: Returns to programmed
favorite channels.
Rotates through the available video
sources for the selected device.
In CBL mode: Displays guide.
In TV mode: Opens closed captioning
(CC).
Opens/closes the media tray for the
selected device.
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
In TV mode: Freezes PIP.
In DVD mode: Displays Setup menus.
In VCR mode: Displays tape speed.
In CBL mode: Page Up.
Puts the selected device into a low power
consumption state.
6901-100189 <01>
Programming the Preset Position Keys
To avoid injury or property damage, confirm correct TV width is set before programming the Perset Positions. Do not
come in contact with the LA112 while it is in motion.
CAUTION
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
2. Press +
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
4. Press
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
5. Select the desired preset button twice within 3 seconds to set.
3. Move the LA112 to the desired position for preset using the remote control
arrow keys.
1. Turn control box power switch to “On”.
6. Repeat steps 1-5 for the remaining presets.
6901-100189 <01>
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
NOTE: To program the remote control to operate your DVD player, VCR and cable box, follow the above steps replacing “TV” for
the appropriate device. The following pages list TV, DVD player, VCR and cable box codes.
1. Turn your TV on.
2. Find your TV’s codes from the list on the following page.
3. Press and hold until the TV button stays lit.
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
+
4. Point the remote at your TV and enter a code from the list. Keep entering codes until
the TV powers off.
5. Press The TV button will blink 3 times and go out.
6. Test that the remote works properly with your TV. If not, repeat steps 3-5.
Programming the Remote to Operate an Existing TV
Remote Control
P1
P3
VOL
+
CH
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
P1
P3
VOL
+
CH
POWER
TV
SET
X-ARM
VCR
DVD
CBL
SEL
IN/OUT
P
R
E
S
E
T
P
R
E
S
E
T
MENU
EXIT
MUTE
FAV
1 2 3
4 5 6
7 8 9
0
P2
P4
+
PIP SWAP
OPEN/CLOSE
POSITION
FREEZE SLEEP
INFO
TV/VCR GUIDE
LAST
ENTER
6901-100189 <01>
TV Brand Code Numbers TV Brand Code Numbers
Admiral 220 160 081 072 Emerson 245 155 154 143 096 076 051 048
047 043 028 005 004 001
Advent 231 Fisher 057 007
Aiwa 213 Fujitsu 244
Akai 146 001 Funai 245 043 028
Amark 143 Funai 245 043 028
Ampro 073 Futuretech 043
Amstrad 052 Gateway 041 202
Anam 242 131 080 056 043 GE 220 165 160 155 144 074 073 056
034 009 008 004 001
Aoc 058 004 001 Gradiente 218
Apex 247 haier 203
Audiovox 076 Hallmark 004
Blaupunkt 088 HitachiI 143 075 072 023 012 011 010 009
004
Broksonic 241 Infinity 249 164
Caim 201 JBL 249 164
Candel 004 003 002 001 JCPenney 160 143 101 065 030 024 009 008
004 001
Capehart 058 Jensen 013
Cetronic 043 JV 237 230 145 083 070 038 034
Citizen 143 103 101 043 004 003 002 001 KEC 043
Classic 043 Kenwood 070 001
Concerto 004 Kloss 059 002
Contec 051 043 KMC 143
Cornea System 246 KTV 250 154 143 043 001
Coronado 143 LG (Goldstar) 143 127 119 106 004
Craig 043 Lodgenet 072
Crown 143 043 Loewe 249
Curtis Mathes 143 101 004 001 Logik 072
CXC 043 LXI 249 164 160 081 052 015 007
Daewoo 143 127 125 114 103 076 043 027
016 004
Magnovox 249 205 223 222 216 210 164 160
127 094 064 063 060 059 022 004
003 001 218 219
Daytron 143 004 Marantz 249 164 001
Dell 036 Matsui 164
Dwin 177 Memorex 096 072 007 004
Dynasty 043 Metz 088
Dynatech 062 Mga 042 028 024 004 001
Eiki 187 Minerva 088
Electrohome 196 143 076 024 Mitsibushi 225 146 124 109 042 040 031 028
021 024 004
Motorola 217 Signature 072
MTC 101 062 004 001 Sony 194 147 139 070
Programming Codes
TV Programming Codes
6901-100189 <01>
Programming Codes
TV Programming Codes, continued
TV Brand Code Numbers TV Brand Code Numbers
Nad 025 015 Soundesign 043 028 004 003
NEC 056 040 024 019 016 001 SSS 043 004
Nikei 043 Supremacy 002
Olevia 045 Sylvania 249 245 240 229 226 211 164 160
127 064 063 060 059 003
Onking 043 Symphonic 245
Omwa 043 Tandy 081
Optonica 081 019 Signature 072
Orion 096 Tatung 062 056
Panasonic 250 249 238 227 164 080 056 034 Technics 080 034
Philco 164 064 063 060 059 056 024 004
003 0011
Techwood 004
Phillips 249 205 164 127 093 059 038 005
004 003 001
Teknika 043 101 072 043 028 024 004 003
002
Pioneer 135 025 023 018 001 Telefunken 037
Portland 143 004 Telerent 072
Proscan 197 165 220 160 144 Tera 172
Proton 173 171 143 131 058 004 Thomas 245
Quasar 250 056 044 034 017 TMK 004
Radio Shack 143 127 043 019 004 Toshiba 232 138 101 062 040 032 030 015
007
RCA 228 220 165 160 152 144 074 065
056 024 023 004 001
Totevision 143
Realistic 047 043 019 007 Universal 009 008
Roctec 186 Viceo Concepts 146
Runco 182 168 073 Vidikron 184
Sampo 202 058 004 001 Vidtech 004
Samsung 251 248 209 160 143 127 105 101
089 026 004
Visio 100
Sanyo 082 057 053 020 007 Wards 249 164 143 074 072 064 063 060
034 028 019 009 008 004
Sceptre 035 Westinghouse 245 076
Scott 143 048 043 028 004 Yamaha 004 001
Sears 165 160 143 094 082 057 030 028
015 007 004
York 004
Sharp 207 170 143 081 029 028 022 Yupiteru 043
Siemens 088 Zenith 103 095 073 072
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
Sanus Systems Car Video System LA112 User manual
- Type
- User manual
- This manual is also suitable for
Sanus Systems Car Video System LA112 is a motorized mount for flat-panel monitors, supporting screens from 40 to 63 inches and weighing up to 180 lbs. It extends up to 12 inches from the wall and features remote control for easy adjustment. Safety features include a grounded connection, protective covers, and motion-activated auto-stop. Installation requires attaching the wall plate, mounting brackets, and connecting the IR receiver. The LA112 allows you to conveniently position your TV for optimal viewing angles, making it a great choice for home entertainment systems.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sanus Sanus VisionMount VMCT User manual
-
Sanus Systems VMDD26 User manual
-
-
-
-
-
-
-
-
Sanus VMCA9 User manual
Other documents
-
Novus 961+0509+000 Datasheet
-
Sanus LA112 Installation guide
-
-
-
Pioneer Car Fascia Double DIN kit for Audi A6 Installation guide
-
-
-
SelectBlinds Urban Series Installation guide
-
SelectBlinds Minimalist Series Installation guide
-