Sanus Systems FFMF2A User manual

Brand: Sanus Systems

Model: FFMF2A

Type: User manual

Sanus Systems 2221 Hwy 36 West, St Paul, MN 55113 USA • (6901-100126 <07>)

USA Customer Service 1-800-359-5520 • www.sanus.com

FFMF2A

001507.eps

Do not use this product for any purpose not explicitly specied by Sanus Systems.

Improper installation or use may cause personal injury and/or property damage. If

you do not understand these instructions, or if you have doubts about the safety of

the installation, contact Sanus Systems Customer Service. Sanus Systems is not liable

for injury or damage caused by incorrect installation or use.

CAUTION

This product contains small items that could be a choking hazard if swallowed.

Keep these items away from young children!

WARNING

Thank you for choosing the Sanus Systems FFMF2A flat panel

foundation mount. The Sanus Systems FFMF2A flat panel foundation

mount is designed to support a flat panel monitor weighing up to

31 kg (70 lbs). The lower shelves each support additional equipment

weighing up to 11 kg (25 lbs). Hardware for multiple mounting

configurations is included.

OPT

Hardware and procedures for multiple mounting congurations are

included. When you see this symbol, choose the correct conguration to

suit your needs. Not all hardware included will be used.

6901-100126 <07>

Supplied Parts and Hardware

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item

to your dealer; contact Sanus Systems Customer Service. Never use damaged parts!

[41] x 1

5/32 in.

[11] x 1

001482.eps

FPS10 - Star

[07] x 2

001512.eps

FPS20 - Install Shelf Brackets

[03] x 1

001508.eps

FPS20 - Pillar, Base, and Shelves

[08] x 1

[23] x 4

M4 x 10mm

[10] x 1

001483.eps

[12] x 2

001512.eps

FPS20 - Install Shelf Brackets

[04] x 1

001508.eps

FPS20 - Pillar, Base, and Shelves

[09] x 2

[16] x 4

M6 x 20mm

[37] x 4

1/4-20 x 0.625 in.

[36] x 4

[26] x 4

M4 x 30mm

[27] x 4

M5 x 30mm

[28] x 4

M6 x 35mm

[24] x 4

M5 x 12mm

[25] x 4

M6 x 12mm

[19] x 4

[20] x 4

[21] x 4

[32] x 4

M4 / M5

[33] x 4

M6 / M8

[01] x 1

001508.eps

FPS20 - Pillar, Base, and Shelves

[30] x 4

M4 / M5

[31] x 4

M6 / M8

[17] x 1

1/4-20 x 3.125 in.

[34] x 1

0.5 in.

[35] x 2

0.5 in.

[39] x 2

M6 x 20mm

[38] x 4

M8 x 40mm

[02] x 1

001508.eps

FPS20 - Pillar, Base, and Shelves

[13] x 2

001509.eps

FPS20 - Brackets

[14] x 2

001509.eps

FPS20 - Brackets

[05] x 1

001509.eps

FPS20 - Brackets

[15] x 1

001510.eps

FPS20 - Pivot Pin and Gasket

[29] x 1

001510.eps

FPS20 - Pivot Pin and Gasket

[06] x 1

001508.eps

FPS20 - Pillar, Base, and Shelves

[18] x 1

1/4-20

[40] x 2

1/4-20 x 0.5 in.

[22] x 4

M6 1/4-20

6901-100126 <07>

1: Install Pillar on Base

001511.eps

[01]

[38]

[02]

2: Install Brackets on Pillar

001512.eps

FPS20 - Install Shelf Brackets

001512.eps

FPS20 - Install Shelf Brackets

[16]

[12]

[14]

[18]

6901-100126 <07>

200mm x 200mm

[41]

3: Choose Correct Mounting Plate

75mm x 75mm or 100mm x 100mm

001482.eps

FPS10 - Star

75mm

[11]

001482.eps

FPS10 - Star

100mm

[11]

For monitors with 200mm x 200mm hole

spacing, you must remove the existing plate

from the head assembly [11] and replace it

with the larger plate [10].

NOTE

001517.eps

001490.eps

001517.eps

001420.eps

Arrows

[11]

[10]

200mm

001420.eps

Arrows

6901-100126 <07>

4: Install Head Assembly on Monitor

For Monitors with Flat Back

For Monitors with a Curved Back or an Obstruction

001503.eps

[30], [31]

[19], [20], [21]

[23], [24], [25]

[11]

[30], [31]

[19], [20], [21]

[26], [27], [28]

[11]

[32], [33]

6901-100126 <07>

6: Install Monitor on Pillar

001513.eps

[17]

5: Install Pivot Pin

001510.eps

FPS20 - Pivot Pin and Gasket

001510.eps

FPS20 - Pivot Pin and Gasket

[15]

[01]

[29]

[13]

[05]

[39]

001513.eps

[13]

[35]

[34]

[35]

[22]

[40]

6901-100126 <07>

8: Install Wire Channel Covers

001515.eps

[03], [04]

[37]

[36]

[07]

7: Install Shelves

[41]

CSAV, Inc. and its afliated corporations and subsidiaries (collectively, “CSAV”), intend to make this manual accurate and complete. However, CSAV makes no claim that the information contained herein

covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to

change without notice or obligation of any kind. CSAV makes no representation of warranty, expressed or implied, regarding the information contained herein. CSAV assumes no responsibility for accuracy,

completeness or sufciency of the information contained in this document.

001514.eps

[06]

[08]

[09]