Toro Belt Guard Kit, XLS 420T Lawn Tractor Installation guide

Toro
Brand
Toro
Model
Belt Guard Kit, XLS 420T Lawn Tractor
Type
Installation guide

Toro Belt Guard Kit, XLS 420T Lawn Tractor

This comprehensive kit provides additional protection for your lawn tractor's belt and related components. Once installed, these guards will help prevent entanglement and damage caused by debris or other hazards encountered while mowing.

By effectively shielding the belt drive system, the guards enhance the overall safety and reliability of your tractor. They are designed to work seamlessly with your XLS 420T model, providing peace of mind during operation.

Installing the guards is straightforward, with detailed instructions included in the kit. The process involves drilling holes for secure mounting and attaching the guards to both the mowing deck and frame. Once installed, they will not interfere with the safe operation or maneuverability of your tractor.

Toro Belt Guard Kit, XLS 420T Lawn Tractor

This comprehensive kit provides additional protection for your lawn tractor's belt and related components. Once installed, these guards will help prevent entanglement and damage caused by debris or other hazards encountered while mowing.

By effectively shielding the belt drive system, the guards enhance the overall safety and reliability of your tractor. They are designed to work seamlessly with your XLS 420T model, providing peace of mind during operation.

Installing the guards is straightforward, with detailed instructions included in the kit. The process involves drilling holes for secure mounting and attaching the guards to both the mowing deck and frame. Once installed, they will not interfere with the safe operation or maneuverability of your tractor.

FormNo.3368-776RevB
BeltGuardKit
XLS420TLawnTractor
ModelNo.120-7760
InstallationInstructions
Donotsupplytheseinstructionstothecustomer.
TheseinstructionsareforadealertoinstalladditionalbeltguardsonmachinessoldinFrance.
Safety
SafetyandInstructional
Decals
Safetydecalsandinstructionsareeasily
visibletotheoperatorandarelocated
nearanyareaofpotentialdanger.
Replaceanydecalthatisdamagedor
lost.
93-6674
1.Crushinghazard,hand—readtheinstructionsbefore
servicingorperformingmaintenance.
120-1119
1.Firehazard—readtheOperator'sManual.
Installation
Note:Determinetheleftandrightsidesofthemachine
fromthenormaloperatingposition.
1
PreparingforInstallation
NoPartsRequired
Procedure
Important:Refertothe
Operator's Man ual
ifyou
areunfamiliarwiththespecicsofoperatingthis
machinebeforeproceeding.Themanualcontains
importantinformationaboutsafelyoperatingthe
machine.Ifyoudonotknowthisinformation,you
couldseriouslyinjureyourselforothers.
1.Parkthemachineonalevel,smoothsurfacewith
sufcientspacetoaccessbothsidesofthemowing
deck.
2.Levelthemowingdeck;seetheOperator’sManualfor
thismachine.
3.Lowerthemowingdecktotheshortestcutting
height.
WARNING
Beforeworkingonthemachine,stoptheengine,
settheparkingbrake,removetheignitionkey,
anddisconnectthesparkplugwire.
©2011—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
AllRightsReserved
CAUTION
Ifyouleavethekeyintheignitionswitch,
someonecouldaccidentlystarttheengineand
seriouslyinjureyouorotherbystanders.
Removethekeyfromtheignitionanddisconnect
thewirefromthesparkplugbeforeyoudoany
maintenance.Setthewireasidesothatitdoes
notaccidentallycontactthesparkplug.
4.Checktheloosepartsbagandverifythatitcontains
allthepartslistedinthisdocument.
5.Removethemowingdeckandslideitoutfrom
underthetractionunit;refertotheOperator’sManual
forthismodel.
2
InstallingtheDeckBeltGuards
Partsneededforthisprocedure:
1
Leftdeckbeltguard
1Rightdeckbeltguard
2
Self-tappingscrew(M6-3x19)
1
Hexbolt(M6-1X16)
1
Locknut(NIM6-1)
1Washer
Procedure
1.Loosen,butdonotremove,theangenutonthe
outsideofeachsuspensionbracketontherearof
thedeck;see
Figure1.
Figure1
1.Flangenut(2)
2.Drillaholefortherightdeckbeltguardinthe
mowingdeckasshowninFigure2.
Figure2
1.Drilla5.5mmdiameter
hole.
3.Measure130mmfromthe
sideoftheslot.
2.Measure41mmfromthe
endoftheslot.
3.Drillanotherholefortheleftdeckbeltguardinthe
mowingdeckasshownin
Figure3.
Figure3
1.Holedrilledinprevious
step
3.Drilla5.5mmdiameter
hole.
2.Measure46mmfromthe
endoftheslot.
4.Measure149mmfromthe
sideoftheslot.
4.Mountbothleftandrightdeckguardstothemowing
deckasshowninFigure4.
2
5
6
7
2
1
3
4
2
g016047
Figure4
1.Rightdeckbeltguard
5.Hexbolt(M6-1X16),
insertedfrombelow
2.Flangenut,existing(2,
onenotshown)
6.Locknut(NIM6-1)
3.Leftdeckbeltguard7.Washer(M6)
4.Self-tappingscrew
(M6-3X19),inserted
fromabove(2)
5.Installthemowingdeckontothetractionunitas
describedintheOperator'sManual.
6.Verifythattheguardsareclearofallmovingparts
acrosstheirfullrangeofoperation,thatitwillnot
causedamagetowires,hosesorothercomponents
andthatitwillnotinterferewiththesafeoperation
ofthetractionunitorthemowingdeck.
3
InstallingtheLeftFrameBelt
Guard
Partsneededforthisprocedure:
1
Leftframebeltguard
4
Hexbolt(M6-1X16)
4
Locknut(NIM6-1)
2
Washer(M6)
Procedure
1.AttachtheleftframebeltguardasshowninFigure5.
2
1
3 4
5
6
g016048
7
Figure5
1.Locknut(NIM6-1)(2)5.Hexbolt(M6-1X16),
insertedfrominsideframe
2.Washer(M6)(2)6.Locknut(NIM6-1)
3.Hexbolt(M6-1X16),
insertedfrominsideframe
(2)
7.Openholeinleftframe
beltguard
4.Leftframebeltguard
2.Drillaholeintheframejustinfrontoftheleftrear
wheel.Usetheopenholeintheleftframebeltguard
asaguide;seeFigure6.
Important:Thereisabundleofwiresonthe
backsideoftheframewhereyouaredrilling.
Moveitclearofthedrilllocationpriortodrilling
thehole.
Figure6
1.Drilla6.2mmdiameter
hole
3.Locknut(NIM6-1)
2.Hexbolt(M6-1X16),
insertedfrominsideframe
3.InstallthehexboltandlocknutasshowninFigure6.
4.Verifythattheguardsareclearofallmovingparts
acrosstheirfullrangeofoperation,thatitwillnot
causedamagetowires,hosesorothercomponents
3
andthatitwillnotinterferewiththesafeoperation
ofthetractionunitorthemowingdeck.
4
InstallingtheRightFrameBelt
Guard
Partsneededforthisprocedure:
1
Rightframebeltguard
2
Hexbolt(M6-1X16)
2
Locknut(NIM6-1)
Procedure
1.Attachtherightframebeltguardasshownin
Figure7andFigure8.
Figure7
1.Bolt,existing(2)2.Rightframebeltguard
Figure8
1.Hexbolt(M6-1X16),
insertedfrominsideframe
(2)
3.Rightframebeltguard
2.Locknut(NIM6-1)(2)
A.Loosen,butdonotremove,the2existingbolts
intheframejustbehindtherightfrontwheel.
B.Attachtherightframebeltguardandtightenall
fastenerssecurely.
2.Verifythattheguardsareclearofallmovingparts
acrosstheirfullrangeofoperation,thatitwillnot
causedamagetowires,hosesorothercomponents
andthatitwillnotinterferewiththesafeoperation
ofthetractionunitorthemowingdeck.
4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Toro Belt Guard Kit, XLS 420T Lawn Tractor Installation guide

Toro
Brand
Toro
Model
Belt Guard Kit, XLS 420T Lawn Tractor
Type
Installation guide

Toro Belt Guard Kit, XLS 420T Lawn Tractor

This comprehensive kit provides additional protection for your lawn tractor's belt and related components. Once installed, these guards will help prevent entanglement and damage caused by debris or other hazards encountered while mowing.

By effectively shielding the belt drive system, the guards enhance the overall safety and reliability of your tractor. They are designed to work seamlessly with your XLS 420T model, providing peace of mind during operation.

Installing the guards is straightforward, with detailed instructions included in the kit. The process involves drilling holes for secure mounting and attaching the guards to both the mowing deck and frame. Once installed, they will not interfere with the safe operation or maneuverability of your tractor.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents