2. Toro
  3. Belt Guard Kit, DH 140 Series Lawn Tractor
Belt Guard Kit, DH 140 Series Lawn Tractor

Toro Belt Guard Kit, DH 140 Series Lawn Tractor Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Belt Guard Kit, DH 140 Series Lawn Tractor Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the purpose of the Toro Belt Guard Kit?
    What safety precautions should be taken before installing the belt guard kit?
    What tools are required to install the belt guard kit?
    How many parts are included in the belt guard kit?
    Which side of the lawn tractor should the left belt guard be installed on?
    How many holes need to be drilled for the left belt guard?
    What is the diameter of the holes that need to be drilled?
    What type of fasteners are used to install the left belt guard?
    How many self-tapping screws are used to install the left belt guard?
    What is the purpose of the belt guard cover?
FormNo.3368-770RevA
BeltGuardKit
DH140SeriesLawnTractor
ModelNo.120-1180
InstallationInstructions
Donotsupplytheseinstructionstothecustomer.
TheseinstructionsareforadealertoinstalladditionalbeltguardsformachinessoldinFrance.
Safety
SafetyandInstructional
Decals
Safetydecalsandinstructionsareeasily
visibletotheoperatorandarelocated
nearanyareaofpotentialdanger.
Replaceanydecalthatisdamagedor
lost.
120-1119
1.Firehazard—readtheOperator’sManual.
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Nopartsrequired
–
Prepareforinstallation.
Leftbeltguard
1
Self-tappingscrew(M4.2x13)
4
Installtheleftbeltguard.
Beltguardcover1
Self-tappingscrews(M4.2x13)
2
Installthebeltguardcover.
Rightbeltguard1
Self—tappingscrews(M4.2x13)
4
Hexbolt(M4x10)
2
Washer(M4.3)
2
Hexnut(M4)
2
Installtherightbeltguard.
©2011—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
PreparingforInstallation
Important:Refertothe
Operator’ s Man ual
ifyou
areunfamiliarwiththespecicsofoperatingthis
machinebeforeproceeding.Themanualcontains
importantinformationaboutsafelyoperatingthe
machine.Ifyoudonotknowthisinformation,you
couldseriouslyinjureyourselforothers.
1.Parkthemachineonalevel,smoothsurfacewith
sufcientspacetoaccessbothsidesofthemowing
deck.
2.Lowerthemowingdecktotheshortestcutting
height.
WARNING
Beforeworkingonthemachine,stoptheengine,
settheparkingbrake,removetheignitionkey,
anddisconnectthesparkplugwire.
CAUTION
Ifyouleavethekeyintheignitionswitch,
someonecouldaccidentlystarttheengineand
seriouslyinjureyouorotherbystanders.
Removethekeyfromtheignitionanddisconnect
thewirefromthesparkplugbeforeyoudoany
maintenance.Setthewireasidesothatitdoes
notaccidentallycontactthesparkplug.
3.Supporttherearaxleonbothsidesandremoveboth
rearwheels.
InstallingtheLeftBeltGuard
1.Ontheleftsideofthemachine,disconnectthe
steeringlinkage.
2.Drill4holeswithadiameterof3.4mminthe
locationsshowninFigure1,Figure2andFigure3.
Installtheleftbeltguardusingthefastenerslisted
inFigure1.
Figure1
1.Self-tappingscrew(M4.2x13)(4)
Figure2
1.148mm
3.3.4mmdiameter(2)
2.257mm4.15.5mm
2
Figure3
1.8.5mm3.32mm
2.53.5mm
4.3.4mmdiameter(2)
3.Verifythattheguardisclearofallmovingparts
acrosstheirfullrangeofoperation,thatitwillnot
causedamagetowires,hosesorothercomponents
andthatitwillnotinterferewiththesafeoperation
ofthetractionunitorthecuttingdeck.
4.Attachtheleftrearwheel.
InstallingtheBeltGuardCover
Ontherightsideofthemachine,drill2holeswitha
diameterof3.4mminthelocationsshowninFigure4
andinstallthebeltguardcoverusingthefastenerslisted.
Figure4
1.Self-tappingscrews(M4.2x13)(2)
Figure5
1.40mm3.12mm
2.145mm4.3.4mmdiameter
InstallingtheRightBeltGuard
1.Ontherightsideofthemachine,drill4holeswith
adiameterof3.4mminthelocationsshownin
Figure6,Figure7,Figure8andFigure9.Installthe
rightbeltguardusingthefastenerslistedinFigure6.
Figure6
1.Hexbolt(M4x10)(2)3.Hexnut(M4)(2)
2.Washer(M4.3)(2)4.Self—tappingscrews
(M4.2x13)(4)
3
Figure7
1.15mm3.77.5mm
2.3.4mmdiameter(2)
4.105.5mm
Figure8
1.3.4mmdiameter3.23mm
2.18mm
Figure9
1.17mm3.158mm
2.3.4mmdiameter
2.Verifythattheguardisclearofallmovingparts
acrosstheirfullrangeofoperation,thatitwillnot
causedamagetowires,hosesorothercomponents
andthatitwillnotinterferewiththesafeoperation
ofthetractionunitorthecuttingdeck.
3.Attachtherightrearwheel.
4
/