Scan Mac Manager for KODAK Personal Photo Scanners
(scan and save pictures directly into Mac Computer)
System requirements:
MAC OS 10.5, 10.6 or later
Intel Duo Core / G3
1.2GHZ or better / G3
10MB free hard disk space
128MB RAM
1
Insert SD card which is
included with scanner.
After re-boot, the Scan
Mac Manager launches
each time you connect
scanner to your computer.
2
Turn on.
3
Connect USB cable.
6
After files are un-archived,
double-click Scan2Mac.
Follow the prompts to
install the software.
87
Scanner
Computer
Scan your originals.
By default, files are saved in
/Users/(your username)/
Pictures/PHOTO1 folder.
9
4
Double-click on the
KODAKSCN volume
on the desktop.
Customer Support: http://www.pandigital.net/kodaksupport
NOTE: The full User Guide is in the
Documentation folder on the memory card
5
Double-click KODAK/
Software/KODAK_Scan_Mac_
Software_Setup_Vxxxx >
ScanMac_KODAK_Scanner_
Setup_Vxxxx.zip.
PHOTO1