Eurotech P811 User manual

Type
User manual

Eurotech P811 is a stylish pendant light fixture designed to enhance your indoor spaces with its elegant appearance. Crafted from durable metal, this versatile light features a 40mm diameter and a 64mm height, making it ideal for various room settings. It comes in a range of colors, including black, brushed chrome, white, and red, allowing you to choose the perfect match for your décor. With its E27 lamp holder, the Eurotech P811 supports a maximum wattage of 60W, providing ample illumination for your space.

Eurotech P811 is a stylish pendant light fixture designed to enhance your indoor spaces with its elegant appearance. Crafted from durable metal, this versatile light features a 40mm diameter and a 64mm height, making it ideal for various room settings. It comes in a range of colors, including black, brushed chrome, white, and red, allowing you to choose the perfect match for your décor. With its E27 lamp holder, the Eurotech P811 supports a maximum wattage of 60W, providing ample illumination for your space.

Weastly Pendant
Model: P811
Installation Instructions
All installations must be carried out by a qualified electrician following local regulations. Make sure that the power is switched off before
installation. Please read and follow the ‘Installation instructions’ and ‘Safety instructions’ sections carefully before commencing installation.
Installation of this model can change from time to time please read instructions every time before installation. For detailed specification, please go to our website eurotechlighting.co.nz
Code: Colour: Dimensions
(mm): Driver: Fixing Area
(mm): Lamp: Material: Suspension
Cable: Voltage:
P811-BLK Black
40Ø x 64H Driver not
required 120Ø
E27 60W max
(Lamp not
included)
Metal 2M 230V
P811-BCH Brushed Chrome
P811-WH White
P811-RED Red
For detailed specification, please go to our website eurotechlighting.co.nz
1
2
3
4
Installation Instructions
1. Using mounting brackets as a guide drill two mounting holes. Knock two white expansion tubes provided into the holes.
2. Turn two pieces screws into the white expansion tubes through the bracket holes to fix the bracket on the ceiling.
3. Connect wires into connector block provided paying attention to live, natural + earth markings.
4. Once all wires are connected, place your LED lamp into fitting. Ensure installation is correct before switching on the fitting to test.
Saftey Instructions
Read these instructions carefully before commencing installation.
1. The light source contained in this luminaire shall only be replaced by the manufacturer or this service
agent or a similar qualified person.
2. This LED luminaire must be installed by a licensed electrician ONLY following all local regulations.
3. Ensure that the cables will not be squeezed or damaged by sharp edges.
4. Clean the light with a soft cloth and a standard PH-neutral detergent.
5. Misuse of/or changes to the appliance shall void all warranties.
6. Do not install on a surface that is not suitable or deformed.
7. Do not install on or above a surface with a high temperature.
8. There should not be any materials that are corrosive, explosive.
  • Page 1 1

Eurotech P811 User manual

Type
User manual

Eurotech P811 is a stylish pendant light fixture designed to enhance your indoor spaces with its elegant appearance. Crafted from durable metal, this versatile light features a 40mm diameter and a 64mm height, making it ideal for various room settings. It comes in a range of colors, including black, brushed chrome, white, and red, allowing you to choose the perfect match for your décor. With its E27 lamp holder, the Eurotech P811 supports a maximum wattage of 60W, providing ample illumination for your space.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI