1.Turnowatersupplytorefrigerator
2.Locateaneasilyaccessiblesectionofrefrigeratorwatersupplytubingorsupplylineto
refrigeratorfromunder-sink.
3. Ifinstallingonthebackofarefrigerator;cutandremovea
11.5”sectionofrefrigeratorwatersupplytubing.
•Useatubecutterforcoppertubingandautilityknifeforplastic
tubing.Makesureendsaresquare.
4.Referringto“UsingPush-InFittings”sectionbelow,insertrefrigeratorwatersupplytubinginto
inletpush-inttingonlter.
5. Turnontheincomingwatersupplyandushthelterintoa
bucket.Runwaterfor2-3minutes.Theinitialsurgeofwatermaybe
discoloredduetocarbonnes.
6. Shutowatersupplyagain.Referringto“UsingPush-InFittings”
section,insertwatersupplytubefromrefrigeratorintooutlettting.
7. Useplasticstraptosecureltertobackofrefrigeratororundersink.
8. Turnonwatersupplytorefrigeratorandcheckforleaks.
Filter Replacement
1. Turnowatersupplytorefrigerator.
2. Referringtosection“UsingPush-InFitting”,releasetubingfrombothendsoflter.
3. Referringto“UsingPush-InFittings”section,insertrefrigeratorwatersupplytubingintoinlet
push-inttingonlter.
4.Turnontheincomingwatersupplyandushthelterintoabucket.Runwaterfor2-3minutes
toushoutair.
5. Shutowatersupplyagain.Referringto“UsingPush-InFittings”section,insertwatersupply
tubefromrefrigeratorintooutlettting.
6.Turnonwatersupplytorefrigeratorandcheckforleaks.
Troubleshooting
IfwaterleaksatPush-inConnections:Pushtubinginasfarasitwillgo.Ifleakingcontinues,shut
owaterattheoriginalvalveandremovewaterlinebypushinginontheconnectorcollarwhile
pullingthetubingaway.See,“Using Push-In Fittings”section.Inspecttubingforcracksand
scratches.Iftubingiscrackedorscratched,simplycutthatportionawayandreinsertnewendof
tubingintotting.Makesuretubingiscutstraight.Ifnot,re-cut.
Do not use with water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after the system.
COLLET
BACKSTOP
Using Push-In Fittings
To Release Tubing
Push in grey collet to release tubing.
With collet held, pull tubing straight out.
To Attach Tubing
Push tubing in as far as it will go. Tubing must
be inserted past o-ring and hit backstop. Pull
tube to ensure it is secured.
Filter Installation
Parts and Material Included
•FilterCartridge
•Adjustableplasticstrap
•Installationinstructions
Tools & Parts Needed
•TubeCutterorUtilityKnife
•Bucketforushinglter
Install in a location that is
not susceptible to freezing
temperatures.
Install away from direct sunlight
as prolonged exposure to light
can weaken plastic components.
A water supply line must be run
to the refrigerator or fountain
prior to installation of this filter.
Correct
Incorrect