F35523 (Sept. 2008)
This booklet describes the functions you need to start using your scale.
For additional details and advanced functions, consult the User Instructions
on the CD shipped with the scale. The User Instructions may include functions
that are not applicable to your model scale. Ignore any sections that do not
apply.
Label Source
To order labels or speak with an ITW label representative, please call
1 - 800 - 695 - 0036.
SD100 Service-Counter Scale
QUICKSTART GUIDE
2
INSTALLATION
Make sure that the scale is placed securely on a at and level surface.
Training
Do not attempt to operate or carry out any procedure on a machine or
network unless you have received the appropriate training or read the
instructions provided.
Radio Interference
This scale is a class A device. In a domestic environment, this device may
cause radio interference in which case the user may be required to take
adequate preventive measures.
Handling
Leveling
Weights & Measures Requirement
© Hobart, 2008
3
Connections
The scale should be connected to a 120 Volt receptacle protected by a
15 Amp. circuit breaker or fuse. The transformer on the power cord
converts the 120 VAC power to 24 Volts DC.
Before operating your scale make sure that it has been programmed with
the required data and setup with the necessary functions.
Switching On & Off
The switch is located underneath on the
left side. Turn off before unplugging.
ON OFF
USB
ETHERNET NETWORK
ON/OFF SWITCH
USB
POWER
4
Clear
Test
Override
Zero
Accept
Void Hold
Prepack
Enter
PLU
Tare
Print
Enter
Speedkeys Display & Operator Keys
Programming Keys
Keyboard Overlay
The keyboard overlay reverses to display the manager side of the
overlay when programming the scale or the operator Speedkeys
when weighing and labeling packages. To reverse the overlay,
hold the tab in the middle of the bottom and slide it down.
Reverse the overlay and slide it back under the protective cover.
OPERATION
5
Operator Keys
Resets the scale weight to zero.
Subtracts the weight of the container when weighing items.
Prepack mode retains the tare and the PLU until cancelled.
Cancels a PLU or price override. It also clears messages or
characters from the display.
Prints a label.
Conrms data entry.
Allows you to enter the PLU number using the number keys.
Allows you to enter a price that is different from the programmed
price of a PLU.
Saves entered data during Create / Edit PLU.
Allows you to do the following three functions:
1. Initiates test sequence for the display.
2. Press again during the test sequence to print a test report.
3. Press an operator key and enter their PIN number during
the test sequence to gain access to Manager Mode.
Zero
Enter
Override
Hold
Prepack
Tare
Clear
Test
PRINT
Enter
PLU
Speedkeys (PLUs)
The white keys on the ip side of the programming keyboard
overlay function during normal operation. They can be assigned
to special functions such as specic PLUs, Manual Price entry,
lb/oz toggle, Operator ID, department, etc.
Accept
6
SD
Function List
Selected Function
Basic Programming
12
456
7
3
8
0
9
Test
Enter Enter
Enter
s
s
Select Operator PIN 4296
12
456
7
3
8
0
9
Enter
Home
^
^
^
^
Accept
Selects the highlighted
menu item.
Move up or left on menu.
Move down or right on
menu.
Use number keys to select
a numbered menu item.
Quick save during PLU create/edit.
Move to previous menu.
Move to top level of menu. At top level
of menu, Home returns you to operator
mode.
SD100 | Max 30 lb Min 0.20 lb d=0.01lb
5 Communication
6 USB Backkup
7 Audit Mode
Programming Keys
The programming keys are used with some operator keys (below)
to move around the menus and select menu items.
Operator PIN
Operator 1 is the default and the associated PIN is 4296.
For additional security, you can assign each operator with an
individual PIN and individual function access limits.
To Enter Manager Mode (before programming)
Press Test, then Enter.
Authorizing Op 1
Manager Mode Layout
System Data Accesses These Submenus
1 Products 5 Tables 9 Nutri Facts
2 Departments 6 Add Label
3 Operators 7 Date & Time
4 Messages 8 Function Security
888888 888888
888888 888888 Operator 1
Operator 2
Operator 3
Operator 4
s
s
Back
one level
=
=
7
Basic Operations
Assigning PLU Keys
Manager Mode
12
456
7
3
8
0
9
12
456
7
3
8
0
9
Menu Item Number
Dept. Number
0 - 9
Enter
Enter Enter
4 Machine Setup
1 Keyboard Setup
1 Key Assign
1 Standard Assign
12
456
7
3
8
0
9
PLU Number
PLU
?
Assign
PLU Key
12
456
7
3
8
0
9
12
456
7
3
8
0
9
Menu Item Number
Operator Number
0 - 20
Enter
4 Machine Setup
1 Keyboard Setup
1Key Assign
1 Standard Assign
2 Operator Assign Operator Key
Operator 1
Maria
12
456
7
3
8
0
9
12
456
7
3
8
0
9
12
456
7
3
8
0
9
12
456
7
3
8
0
9
Menu Item Number
Operator Number
0 - 20
Security Level
0 - 2
PIN
Operator Name
Enter
Enter Enter
Enter Enter Enter
1 System Data
3 Operators
C
C
ÆÍ
B
Ä
À
%
gG
A
Á
Å
Reenter
PIN
Logged On/Off
Programming Operators
Manager Mode
Assigning Operator Keys
Manager Mode
Changing Prices
Use this function if you want to change only the unit/item price.
Manager Mode
12
456
7
3
8
0
9
12
456
7
3
8
0
9
Menu Item Number Dept. Number
0 - 9
Enter Enter Enter
1 System Data
1 Products
1 Change Price
12
456
7
3
8
0
9
PLU Number
12
456
7
3
8
0
9
New Price
Enter
8
PRINT
12
456
7
3
8
0
9
Speedkey PLU PLU Number
or
0.65 LB $1.40
Cherries
Operator Functions
Printing Labels
Sales Mode
Using the Override Key
Sales Mode
Using a Tare
Sales Mode
12
456
7
3
8
0
9
12
456
7
3
8
0
9
12
456
7
3
8
0
9
Tare
Speedkey PLU PLU Number
or
0.00 LB $0.00
0.65 LB $1.40
Cherries
PRINT
Speedkey PLU PLU Number New Price
or
Override
PRINT
0.65 LB $1.40
Cherries
9
Barcode Formats
Barcode Format Character Denitions
A - PLU or article number
V - Price verier (2nd check digit)
P - Price
C - Overall check verier, cannot be changed (1st check digit)
10
Format 0 • 2.25” x 1.75” (W x L)
Packed On
Net Wt / Ct Unit Price Total Price
Sell By
Bar Code (UPC 12)
Store Logo (Preprinted
or Bit Map Image)
PLU Text 1 (40 chars)
Font Size C
Date 1 Date 2
Total Price
Weight or Count
Unit Price / Item Price
Store Name
Preloaded Label Formats
11
Format 1 • 2.25” x 2.375” (W x L)
Net Wt / Ct Unit Price Total Price
Sell By
Bar Code (UPC 12)
Store Logo (Preprinted
or Bit Map Image)
PLU Text 1 (40 chars)
Font Size C
PLU Text 2 (1500 chars)
Font Size 6 (7 Lines
approx. 67 chars/line)
Sales Text Date 2
Total Price
Weight or Count
Unit Price / Item Price
Store Name
12
Format 2 • 2.25” x 3.00” (W x L)
Net Wt / Ct Unit Price Total Price
Sell By
Bar Code (UPC 12)
Store Logo (Preprinted
or Bit Map Image)
PLU Text 1 (40 chars)
Font Size F
Safe Handling Logo
Sales Text Date 2
Total Price
Weight or Count
Unit Price / Item Price
Store Name
13
Format 3 • 2.25” x 3.00” (W x L)
Net Wt / Ct Unit Price Total Price
Sell By
Bar Code (UPC 12)
Store Logo (Preprinted
or Bit Map Image)
PLU Text 1 (40 chars)
Font Size F
PLU Text 2
(1500 chars max.)
Font Size 6
14 Lines
Sales Text
Font 8
Date 2
Total Price
Weight or Count
Unit Price / Item Price
Store Name
Packed On
Date 1
14
Format 4 • 2.25” x 3.00” (W x L)
Net Wt / Ct Unit Price Total Price
Bar Code (UPC 12)
Store Logo (Preprinted
or Bit Map Image)
PLU Text 1 (40 chars)
Font Size F
PLU Text 2
(1500 chars max.)
Font Size 6
13 Lines
Total Price
Net Wt lb oz (g)
Weight or Count
Unit Price / Item Price
Store Name
15
Format 5 • 2.25” x 4.50” (W x L)
Net Wt / Ct Unit Price Total Price
Bar Code (UPC 12)
Store Logo (Preprinted
or Bit Map Image)
PLU Text 1 (40 chars)
Font Size F
PLU Text 2
(1500 chars max.)
Font Size 6
35 Lines
Total Price
Weight or Count
Unit Price / Item Price
Store Name
Sell By
Sales Text
Font 8
Date 2
Packed On
Date 1
16
Format 5 • Label
Format 6 • Label
17
Format 6 • 2.25” x 4.50” (W x L)
Net Wt / Ct Unit Price Total Price
Bar Code (UPC 12)
Store Logo (Preprinted
or Bit Map Image)
PLU Text 1 (40 chars)
Font Size F
PLU Text 2
(1500 chars max.)
Font Size 6
34 Lines
Total Price
Weight or Count
Unit Price / Item Price
Store Name
Net Wt lb oz (g)
18
Format 7 • 2.25” x 6.00” (W x L)
Net Wt / Ct Unit Price Total Price
Bar Code (UPC 12)
Store Logo (Preprinted
or Bit Map Image)
PLU Text 1 (40 chars)
Font Size F
PLU Text 2
(1500 chars max.)
Font Size 6
46 Lines
Total Price
Weight or Count
Unit Price / Item Price
Net Wt lb oz (g)
Sell By
Sales Text
Font 8
Date 2
Packed On
Date 1
19
Format 7 • Label
20
Format 8 • 2.25” x 3.50” (W x L)
Net Wt / Ct Unit Price Total Price
Sell By
Bar Code (UPC 12)
Store Logo (Preprinted
or Bit Map Image)
PLU Text 1 (40 chars)
Font Size F
Traceability Information
Lot No. & Origin 1, 2, 3
Safe Handling Logo
Sales Text Date 2
Total Price
Weight or Count
Unit Price / Item Price
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
