www.desatech.com
3114370-04B
OPERATING REMOTE
NOTICE: You must light the pi-
lot before using the hand held
remote control unit. Refer to
Lighting Instructions in your
appliance owner’s manual.
1. Afterlighting,letpilotameburnforabout
oneminute.TurncontrolknobtotheON
position.Adjust ame adjustment knob
anywherebetweenHIandLOonmodels
withHi/Loknobconversion.Slideselector
switchtotheREMOTEposition.
Note: Burners may light if hand-held
remote ON button was on when selector
switch was last turned off. You can now
turn the burners on and off with the hand-
held remote control unit.
IMPORTANT:Donotleave the selector
switch in the REMOTE or ON position
whenthepilotisnotlit.Thiswilldrainthe
battery.
2. On/Off Operation: Holdcontrolbuttonon
hand-heldremote until burner turns on.
Holdcontrolbuttonagainuntilburnerturns
off(seeFigure6).Whenturningburners
off,thepilotwillremainlit.
To Lock:Pressbothbuttonsonhand-held
remote control untillight stops ashing.
Hand-heldremotecontrolisnowlocked.If
reisonitwillbeturnedoffautomatically.
Inthelockedstate,lightwillnotlightup
whenanybuttonispressed.
To Unlock:Pressbothbuttonstogether
on hand-held remote control until light
stopsashing.Thehand-heldremoteis
nowunlocked.
IMPORTANT:BesuretopressON/OFF
buttonsonhand-heldremotecontrolunit
for up to 3 seconds to assure proper
operation.
Figure 6 - ON/OFF Hand-Held Remote
Control Unit
Control
Button
IndicatorLight