Stairmaster 8FC Installation guide

Brand: Stairmaster

Model: 8FC

Type: Installation guide

Stairmaster 8FC is a self-powered exercise equipment designed to provide a full-body workout. It features a sturdy frame with handrails for support and a console that displays workout metrics. The 8FC is suitable for various fitness levels and can be used for cardiovascular exercise, endurance training, and muscle strengthening. With its compact design, it can be easily assembled and used in home or gym settings.

Stairmaster 8FC is a self-powered exercise equipment designed to provide a full-body workout. It features a sturdy frame with handrails for support and a console that displays workout metrics. The 8FC is suitable for various fitness levels and can be used for cardiovascular exercise, endurance training, and muscle strengthening. With its compact design, it can be easily assembled and used in home or gym settings.

8-FC InstallatIon InstruCtIons

For installation assistance or missing parts, please call Support at 1-800-503-1221

Document #620-8386 - Revision B

1. Remove all paRts fRom the box

Remove all the packaging material so the 8-FC is ready for as-

sembly. This machine is designed to be self-powered. An AC

adaptor is not included with the base. Some congurations

may require external power. An AC adaptor will be included

with those conguration components. Reference document

#637-8485 for conguration information.

3. Install the DIsplay WelDment

Align the display weldment with the base. Pull cables

through the display weldment. Take care to avoid un-

necessary tension or bending of cables.

Install the 4 bolts with associated at washers and nuts

as shown. Tighten bolts. Replace the shrouds.

2. Remove the shRouDs

Remove the 6 screws that hold on the center shroud

in place. Next remove the 6 screws that hold the side

shrouds in place. Remove the side shrouds from frame.

Set the 3 shrouds and 12 screws aside for later use.

4. Install top of the hanDRaIls

Slide the left handrail into the upper end of the display

weldment and line up the screw holes. Loosely attach

the 2 supplied button screws to the left handlebar weld-

ment junction.

5. Install the bottom of the hanDRaIl

Secure the lower part of the rail into position with

the 2 washers and screws provided and tighten.

Tighten screws in step 4. Perform the same steps

on the right side rail.

6. Install DIsplay ReaR housIng

Fasten the back half of the console assembly

to the Mast using the screws supplied with the

console.

7. ConneCt Cables to Console boaRD

Connect the appropriate wires coming out

of the mast to the correct locations, please

reference the console wiring guide (Doc

620-8424) that come with the console.

8. seCuRe DIsplay

Secure the front half of the console assembly

to the back half using the screws supplied with

the console taking care not to pinch any wires

and ensuring that the rubber console grommet

has a good seal.

1

Stairmaster 8FC Installation guide

Brand: Stairmaster

Model: 8FC

Type: Installation guide

Stairmaster 8FC is a self-powered exercise equipment designed to provide a full-body workout. It features a sturdy frame with handrails for support and a console that displays workout metrics. The 8FC is suitable for various fitness levels and can be used for cardiovascular exercise, endurance training, and muscle strengthening. With its compact design, it can be easily assembled and used in home or gym settings.

Download PDF

Related papers

Other documents