SSP OPTOPIXULTIMATE User manual

Category
Floodlights
Type
User manual
SSP Lighting Systems ~ 2 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
1 Understanding of Product
1.1 Security Warning
When unpacking and before disposing of the carton, check if there is any
transportation damage before using the product. Should there be any damage
caused by transportation, consult your dealer and do not use the apparatus.
Do not install the product or project the beam onto inflammable surfaces.
Minimum distance is 5M
The product is only intended for installation, operation and maintenance by
qualified personnel. And read the user manual and labels on the lighting carefully
before use.
Product should install in a cool place. Keep away from the wall 50cm.
Do not look directly at the lamp light (especially for epilepsy), so as not to cause
damage to the eyes.
Keep the optical system clean. Do not touch the LED lens with bare hands. Do not
use any alcohol liquid or any other liquid to clean the optical system. Use
medicinal absorbent cotton to clean it.
Please do not attempt to dismantle and/or modify the product inner structure.
Otherwise, would not provide 1 year of free warranty.
Electrical connection must only be carried out by qualified personnel.
Before installation, ensure that the voltage and frequency of power supply match
the power requirement of the product.
It is essential that each product is correctly earthed and that electrical
installation conforms to all relevant standards.
Do not connect this device to any other types of dimmer apparatus.
Make sure that the power-cord is never crimped or damaged by sharp edges.
Never let the power-cord come into contact with other cables. Only handle the
power-cord by the plug. Never pull out the plug by tugging the power-cord.
There is no user serviceable parts inside the product, do not open the housing
and never operate the product with the cover removed.
Place the unit where kids can't reach.
This product manual contains important information about the
safe installation and use of this product.Please read and follow
these instruction carefully and keep this manual in a safe place
for future reference.
SSP Lighting Systems ~ 3 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
1.2 Main Technical Parameters
Power supply
Rated Voltage: AC90~240V
Rated Frequency: 50~60Hz ± 10%
Rated Power: 600W (Max)
LED
LED Type: 64pcs ×12W RGBA 4in1 full-color super bright LED
Control Pixel: 16 Pixel control points
Drive Current: 650mA
Colors: 16.7 million colors (0~100% saturation dimming)
Life: 50,000 hours
Control
Control Protocol: International standard DMX-512 signal
Channel Protocol: 4 kinds DMX control channel modes. HSV, RGB, RGBA and
STAG modes can be chosen
Control Mode: DMX-512, auto, master-slave and static mode
Control Address Code: 512 DMX address codes, 61 ID address codes
Optical System
Dimming Mode: Dimmer 0 means fast Linear dimming. Dimmer 1~3 stands for
soft Non-linear dimming.
Dimmer: From 0~100 linear dimming.
Dimming Curve: 4 dimming curves ( Linear, Exponential-1, Exponential-2, S-
Curve )
Lens: Concentrated tilt Fresnel secondary optical lens
Flashing rate: 1~20Hz
Beam angle: 10° X 22°
If you have any questions,don't hesitate to consult our dealer or
manufacturer. Important: Before any installation, maintenance
and cleaning, please ensure that the power cut off!
SSP Lighting Systems ~ 4 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
Security
Cooling System: Intelligent temperature control fan cooling mode
Temperature Protection: 65
Operating Environment: Indoor
Working Temperature: -10°C 40°C
Physical
Dimensions: 1223 * 180 * 203 mm
Weight: 12.3 kg
Surface treatment: High temperature black paint
Housing color: Black (Can be customized)
Connection: Signal cable IN/OUT, power cable IN/OUT.
Dimensions
1.3 Product Features
Using the latest LED control technique and newest intelligent LED Par light can
realize intelligent operation and control through its special menu at the back. This
product is designed for family party, wedding scene, small performances, DISCO
and KTV, bars, DiBa, volume vendor type KTV, ballroom, nightclub and various
performance occasion. Its main features include:
SSP Lighting Systems ~ 5 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
16 Bit dimming for each pixel point.
SMT technology for control board and drive board make low failure rate.
Using concentrated tilt light Fresnel secondary optical lens makes color mixture
more evenly and high brighter.
With many hardware optical fixtures.
Fast change secondary optical system design.
Static color settings (STATIC).
The static power consumption of the control panel is 0.3W, and its efficiency will
reach up to 97%
Refresh rate of the lamp is 3Khz, suitable for all kinds of high demand situations.
Linear dimming and nonlinear dimming (DIMMER).
4 dimming curves.
White balance color setting (CAL).
Overheating automatic protection function (Reduce working current).
Liquid-crystal display screen.
4 kinds DMX working mode.
Master-slave control, multi-units for synchronous control.
1.4 Product Packing Information
Following accessories are packed together with the product, please check them
carefully upon unpacking.
Spare parts Name
QTY
Unit
Remark
SSP OPTP PIX ULTIMATE led light
1
piece
SSP OPTP PIX ULTIMATE led light hanger
2
pieces
Hanger screw
2
pieces
Omega bracket and quick-lock fasteners
2
sets
Side hanging bracket
1
piece
User manual
1
piece
Power cable with plug
1
piece
SSP Lighting Systems ~ 6 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
2 Product Installation
2.1 Power Connection Method
Please connect power as following
Llive wire= Brown wire
Eearth wire= Yellow / green double color wire
Nnull line= Blue wire
When connecting power, ensure that the voltage and frequency of power supply
match the power requirement of the product.
This equipment belong to class 1 protection equipment, therefore, the yellow-
green double colors wire must be earthed correctly by qualified personnel. Before
installation, ensure that the voltage and frequency of power supply match the
power requirements of product. In power supply and voltage fluctuation large
areas, we suggest you to use 110V or 230V or use voltage regulator to supply
power. After electrical connection, this product will have a few seconds self-check
action, self-check finished can be used.
Input / output power cable should be 2.5 square millimeter copper core.
220V: 4 units may be connected in series.
110V: 2 units may be connected in series.
Important: It is essential that Yellow/green double color wire is correctly earthed
and that electrical installation conforms to all relevant standards.
2.2 DMX Connection Method
As this this fixture's DMX signal cable connection is Parallel connection, please
don’t more than 15 units. If the signal cable is over 60m between the DMX512
controller and fixture or between two fixtures, then a DMX signal amplifier is
needed.
SSP Lighting Systems ~ 7 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
2.2.1 When only set the DMX512 address code, no the ID code (STAG MODE), as
below:
XLR 3-pin Cable:
The DMX interface of lamp needs be connected to the DMX controller.
Since STAG MODE has 14 channels, the address code with 14 increment
increasing progressively (e.g., 1, 15, 29 ...).
Every DMX address code can be reused as needed.
DMX address code can be any data between 001 to 512.
Pin#
Function
1
Ground (Screen)
2
Data Minus
3
Data Plus
SSP Lighting Systems ~ 8 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
2.2.2 At the same time set the DMX512 address code and ID code (STAG MODE), as
below:
XLR 5-pin Cable:
The DMX interface of lamp needs be connected to the DMX controller.
Since STAG MODE has 14 channels, the address code with 14 increment
increasing progressively (e.g., 1, 15, 29 ...).
Every DMX address code can be reused as needed.
When the ID address code is 0, it is all in controlled. When ID address code is the
anyone of 1 to 61 that corresponding ID under controlled by CH14.
DMX address code can be any data between 001 to 512.
2.3 Lamp Placement and Direction of Illumination
Opto Pix series fixtures are built with lenses that optimize the beam spread when
used on a wall or cyclorama. The side with square diffuse near-field micro lenses
should be adjacent to the wal or cycloramal. The side with hexagonal far-field micro
lenses is indicated should be facing away from the wall or cyclorama. See the
illustration below.
Pin#
Function
1
Ground (Screen)
2
Data Minus
3
Data Plus
4
Spare Data Minus
5
Spare Data Plus
SSP Lighting Systems ~ 9 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
2.4 Quickly Changing Lenses or hardware fixtures
Opto Pix series have the functions of quick changing lenses and hardware fixture.
Various ideal spot light effects can be achieved by changing lenses. There are two
kinds of optical hardware fixtures present different aesthetic feeling for your
choice. Using the lock catch type installment, may with ease disassemble. Rotate
the lock catch on side plate by counterclockwise 90 degrees to facilitate the
replacement of various lenses. See the illustration below.
Note: The direction of light can be changed by changing the
direction of the lenses.
SSP Lighting Systems ~ 10 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
3 Operation Method
3.1 Back panel functions introduction
MENU: Menu button/return button, enter the menu selection interface or
previous menu.
ENTER: Confirmation button,used to confirm the selected function.
UP/DOWN: Upward/downward select function or Parameter increment /
decrement.
3.2 Menu Overview
NO.
LEVEL 2
MENU
LEVEL 3
MENU
FUNCTION
1
000~512
DMX address settings
2
000~061
ID address settings
3 Channel mode
RGB
3CH
DMX channel mode settings
6CH BIT
6CH
12CH BIT
48CH
96CH BIT
RGBA
4CH
8CH BIT
8CH
16CH BIT
64CH
128CH BIT
STAG
14CH
HSV
3CH
4 Work mode
DMX
Working mode Settings, need to set the
corresponding mode to work normally
STAR
AUTO
5 Dimmer Dim off
Linear dimming curve
Dim 1~3
Nonlinear dimming curve
6
01~10
Auto effect settings
7
000~100
Auto speed settings
8 Static
Red
000~255
Static color settings
Green
000~255
SSP Lighting Systems ~ 11 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
Blue
000~255
Amber
000~255
9 CAL
Red
000~255
White balance settings
Green
000~255
Blue
000~255
Amber
000~255
10 Fan speed
Quiet
Fan off, total power output reduced by 20%.
Studio
Low speed, light output 100 %
Live
High speed, light output 100 %
AUTO
Temperature control mode, reach 40 °C begin to work
11 Dimmer curve
Linear
Light intensity increases linearly with DMX value
Exponential -1
Light intensity can be finely adjusted at lower DMX values and broadly
adjusted at higher DMX values.
Exponential -2
Light intensity can be broadly adjusted at lower DMX values and finely
adjusted at higher DMX values.
S-Curve
Light intensity can be finely adjusted at lower and higher DMX values
and broadly adjusted at medium DMX values.
12 KEY
YES
Password is:
UP+DOWN+UP+DOWN
NO
13
V1.0
Version number
14
35
Temperature display
15 Restore
YES
Restore factory settings
NO
3.2.1 DMX Address Settings (DMX Address)
PressMENUto findDMX Addressmenu and pressENTERto enter
address code setting.
PressUP/DOWNbutton to select DMX address code.
PressENTERto confirm and the selected will be automatically saved.
3.2.2 ID Address Settings (ID Address)
PressMENUto findID Addressmenu and pressENTERto enter
address code setting.
PressUP/DOWNbutton to select ID address code.
PressENTERto confirm and the selected will be automatically saved.
3.2.3 DMX Channel Mode Settings (Channel Mode)
PressMENUto findChannel Modemenu and pressENTERto enter
DMX channel mode setting.
PressUP/DOWNbutton to selectRGB,RGBA,STAGorHSV4
kinds of channel modes.
SSP Lighting Systems ~ 12 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
PressENTERto confirm and the selected will be automatically saved.
3.2.4 Working Mode Settings (Work Mode)
PressMENUto findWork Modemenu and pressENTERto enter
working mode setting.
PressUP/DOWNbutton to selectDMXmode orAUTOmode or
STARstatic mode.
PressENTERto confirm and the selected will be automatically saved.
Note: Only in the corresponding working mode the function control can be
available.
3.2.5 Linear and Nonlinear Dimming Settings (Dimmer)
PressMENUto findDimmermenu and pressENTERto enter linear or
nonlinear dimming mode setting.
PressUP/DOWNbutton to selectDimmer 0normal linear dimming or
Dimmer1~3nonlinear dimming.
PressENTERto confirm and the selected will be automatically saved.
3.2.6 Auto Effect Settings (Auto)
SelectAutoworking mode according to 3.2.4 working mode setting.
PressMENUto findAutomenu and pressENTERto enter auto effect
setting.
PressUP/DOWNbutton to select the auto effect you needed.
PressENTERto confirm and the selected will be automatically saved.
3.2.7 Auto Effect Speed Settings (Auto Speed)
SelectAutomode according to 3.2.6 auto effect mode setting.
PressMENUto findAuto Speedmenu and pressENTERto enter auto
speed setting.
PressUP/DOWNbutton to select the auto speed you needed.
PressENTERto confirm and the selected will be automatically saved.
SSP Lighting Systems ~ 13 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
3.2.8 Static Color Settings (Static)
SelectSTARmode according to 3.2.4 working mode setting.
PressMENUto findSTATICmenu and pressENTERto enter static
color setting.
PressUP/DOWNbutton to select the color and brightness you needed.
PressENTERto confirm and the selected will be automatically saved.
3.2.9 White Balance Settings (CAL)
PressMENUto findCALmenu and pressENTERto enter white
balance color setting.
PressUP/DOWNbutton to select the color and brightness you needed.
PressENTERto confirm and the selected will be automatically saved.
Note: CAL White balance color setting is set as the global color setting of the
entire light, and all color effect running according to CAL menu setting.
3.2.10 Fan Speed Settings (Fan Speed)
PressMENUto findFan Speedmenu and pressENTERto enter fan
speed setting.
PressUP/DOWNbutton to select the fan speed you needed.
PressENTERto confirm and the selected will be automatically saved.
3.2.11 Dimming Curve Settings (Dimmer Curve)
PressMENUto findDimmer Curvemenu and pressENTERto enter
dimming curve setting.
PressUP/DOWNbutton to select Linear,Exponential-1,
Exponential-2orS-Curve4 kinds of dimming curve.
PressENTERto confirm and the selected will be automatically saved.
SSP Lighting Systems ~ 14 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
3.2.12 Key Lock Settings (Key)
PressMENUto findKeymenu and pressENTERto enter key lock
setting.
PressUP/DOWNbutton to selectONorOFF.
PressENTERto confirm and the selected will be automatically saved.
Unlock password isUP + DOWM + UP + DOWM + ENTER.
3.2.13 Restore Factory Settings (Restore)
PressMENUto findRestoremenu and pressENTERto enter restore
factory setting.
PressUP/DOWNbutton to selectYESorNO.
After settingYES, pressENTERkey to restore factory settings.
Restore factory settings parameters:
1. DMX 512 = 001 7. AUTO Speed = 50
2. ID = 000 8. Static = R000 / G000 / B000 / A000
3. Channel Mode = STAG 9.CAL = R255 / G255 / B255 / A255
4. Work Mode = DMX 10.Fan Speed = AUTO
5. Dimmer = Dimmer OFF 11.Dimmer Curve = Linear
6. AUTO = 01
SSP Lighting Systems ~ 15 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
4 Control Channel
4.1 RGB Control Channel Mode
4.1.1 RGB-3CH Mode
4.1.2 RGB-6CH 16Bit Mode
4.1.3 RGB-6CH Mode
4.1.4 RGB-12CH 16Bit Mode
Channel
Control function
Detail description
DMX Data
1
Red
Dimming from 0~100%
0~255
2
Green
Dimming from 0~100%
0~255
3
Blue
Dimming from 0~100%
0~255
Channel Control function
Detail description
DMX Data
1 Red Dimming from 0~100% 0~255
2
Red 16bit
Dimming from 0~100%
0~255
3
Green
Dimming from 0~100%
0~255
4
Green 16bit
Dimming from 0~100%
0~255
5
Blue
Dimming from 0~100%
0~255
6
Blue 16bit
Dimming from 0~100%
0~255
Channel Control function
Detail description
DMX Data
1
Red1
Dimming from 0~100%
0~255
2
Green1
Dimming from 0~100%
0~255
3
Blue1
Dimming from 0~100%
0~255
4
Red2
Dimming from 0~100%
0~255
5
Green2
Dimming from 0~100%
0~255
6
Blue2
Dimming from 0~100%
0~255
Channel Control function
Detail description
DMX Data
1
Red1
Dimming from 0~100%
0~255
2
Red1 16bit
Dimming from 0~100%
0~255
3
Green1
Dimming from 0~100%
0~255
4
Green1 16bit
Dimming from 0~100%
0~255
5
Blue1
Dimming from 0~100%
0~255
6
Blue1 16bit
Dimming from 0~100%
0~255
7 Red2 Dimming from 0~100% 0~255
8
Red2 16bit
Dimming from 0~100%
0~255
9
Green2
Dimming from 0~100%
0~255
10
Green2 16bit
Dimming from 0~100%
0~255
11
Blue2
Dimming from 0~100%
0~255
SSP Lighting Systems ~ 16 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
4.1.5 RGB-48CH Mode
4.1.6 RGB-96CH 16Bit Mode
4.2 RGBA Control Channel Mode
4.2.1 RGBA-4CH Mode
4.2.2 RGBA-8CH 16Bit Mode
12
Blue2 16bit
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Red1
Dimming from 0~100%
0~255
2
Green1
Dimming from 0~100%
0~255
3
Blue1
Dimming from 0~100%
0~255
......
......
......
......
46
Red4
Dimming from 0~100%
0~255
47
Green4
Dimming from 0~100%
0~255
48
Blue4
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Red1
Dimming from 0~100%
0~255
2
Red1 16bit
Dimming from 0~100%
0~255
3
Green1
Dimming from 0~100%
0~255
4
Green1 16bit
Dimming from 0~100%
0~255
5
Blue1
Dimming from 0~100%
0~255
6 Blue1 16bit Dimming from 0~100% 0~255
......
......
......
......
91
Red4
Dimming from 0~100%
0~255
92
Red4 16bit
Dimming from 0~100%
0~255
93
Green4
Dimming from 0~100%
0~255
94
Green4 16bit
Dimming from 0~100%
0~255
95
Blue4
Dimming from 0~100%
0~255
96 Blue4 16bit Dimming from 0~100% 0~255
Channel Control function
Detail description
DMX Data
1
Red
Dimming from 0~100%
0~255
2
Green
Dimming from 0~100%
0~255
3
Blue
Dimming from 0~100%
0~255
4
Amber
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Red
Dimming from 0~100%
0~255
2
Red 16bit
Dimming from 0~100%
0~255
3 Green Dimming from 0~100% 0~255
SSP Lighting Systems ~ 17 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
4.2.3 RGBA-8CH Mode
4.2.4 RGBA-16CH 16Bit Mode
4.2.5 RGBA-64CH Mode
4
Green 16bit
Dimming from 0~100%
0~255
5
Blue
Dimming from 0~100%
0~255
6
Blue 16bit
Dimming from 0~100%
0~255
7
Amber
Dimming from 0~100%
0~255
8
Amber 16bit
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Red1
Dimming from 0~100%
0~255
2
Green1
Dimming from 0~100%
0~255
3
Blue1
Dimming from 0~100%
0~255
4 Amber1 Dimming from 0~100% 0~255
5
Red2
Dimming from 0~100%
0~255
6
Green2
Dimming from 0~100%
0~255
7
Blue2
Dimming from 0~100%
0~255
8
Amber2
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Red1
Dimming from 0~100%
0~255
2
Red1 16bit
Dimming from 0~100%
0~255
3
Green1
Dimming from 0~100%
0~255
4
Green1 16bit
Dimming from 0~100%
0~255
5
Blue1
Dimming from 0~100%
0~255
6
Blue1 16bit
Dimming from 0~100%
0~255
7
Amber1
Dimming from 0~100%
0~255
8 Amber1 16bit Dimming from 0~100% 0~255
9
Red2
Dimming from 0~100%
0~255
10
Red2 16bit
Dimming from 0~100%
0~255
11
Green2
Dimming from 0~100%
0~255
12
Green2 16bit
Dimming from 0~100%
0~255
13
Blue2
Dimming from 0~100%
0~255
14 Blue2 16bit Dimming from 0~100% 0~255
15 Amber2 Dimming from 0~100% 0~255
16
Amber2 16bit
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Red1
Dimming from 0~100%
0~255
2
Green1
Dimming from 0~100%
0~255
3
Blue1
Dimming from 0~100%
0~255
4 Amber1 Dimming from 0~100% 0~255
SSP Lighting Systems ~ 18 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
4.2.6 RGBA-128CH 16Bit Mode
4.3 STAG Control Channel Mode
STAG-14CH Mode
......
......
......
......
61
Red4
Dimming from 0~100%
0~255
62
Green4
Dimming from 0~100%
0~255
63
Blue4
Dimming from 0~100%
0~255
64
Amber4
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Red1
Dimming from 0~100%
0~255
2
Red1 16bit
Dimming from 0~100%
0~255
3
Green1
Dimming from 0~100%
0~255
4 Green1 16bit Dimming from 0~100% 0~255
5
Blue1
Dimming from 0~100%
0~255
6
Blue1 16bit
Dimming from 0~100%
0~255
7
Amber1
Dimming from 0~100%
0~255
8
Amber1 16bit
Dimming from 0~100%
0~255
......
......
......
......
121
Red4
Dimming from 0~100%
0~255
122 Red4 16bit Dimming from 0~100% 0~255
123
Green4
Dimming from 0~100%
0~255
124
Green4 16bit
Dimming from 0~100%
0~255
125
Blue4
Dimming from 0~100%
0~255
126
Blue4 16bit
Dimming from 0~100%
0~255
127
Amber4
Dimming from 0~100%
0~255
128
Amber4 16bit
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Overall dimmer
Dimming from 0~100%
0~255
2 Strobe
NO FUNCTION
0~15
From low to fast
16~214
Random strobe
215~255
3 Color effect
NO FUNCTION
0~17
Red
18~35
Green
36~53
Blue 54~71
Yellow
72~89
Purple
90~107
Cyan
108~125
White
126~143
SSP Lighting Systems ~ 19 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
Red green red green
144~161
Red red blue blue
162~179
Yellow yellow cyan cyan
180~197
Green purple purple green
198~215
Rainbow effect jump changing
216~233
Rainbow effect gradual changing
234~255
4 Color changing speed From low to fast 0~255
5 Pattern effect
All light on
0~15
Pixel 1
16~31
Pixel 2
32~47
Pixel 3
48~63
Pixel 4
64~79
Pixel 1/2
80~95
Pixel 3/4 96~111
Pixel 1/4
112~127
Pixel 2/3
128~143
Pixel 1/3
144~159
Pixel 2/4
160~175
Pixel 1 ~4 racing effect in pixel by
pixel
176~191
2 pixels
Synchronous
racing effect
192~207
Pixel 1/3, pixel 2/4 racing effect
208~223
Pixel 1/4, pixel 2/3 racing effect
224~239
Pixel 1 ~4 racing effect by increase in
pixel to pixel
240~255
6
Pattern changing speed
From low to fast
0~255
7 COLOR MACRO
NO FUNCTION (0=default)
0~0
Filter 4 (Medium Bastard Amber)
1~2
Filter 25 (Sunset Red)
3~4
Filter 19 (Fire)
5~6
Filter 26 (Bright Red)
7~8
Filter 58 (Lavender) 9~10
Filter 68 (Sky Blue)
11~12
Filter 36 (Medium Pink)
13~14
Filter 89 (Moss Green)
15~16
Filter 88 (Lime Green)
17~18
Filter 90 (Dark Yellow Green)
19~20
Filter 49 (Medium Purple)
21~22
Filter 52 (Light Lavender) 23~24
Filter 102 (Light Amber)
25~26
Filter 103 (Straw)
27~28
Filter 140 (Summer Blue)
29~30
Filter 124 (Dark Green)
31~32
Filter 106 (Primary Red)
33~34
SSP Lighting Systems ~ 20 ~ www.sspworld.com
OPTO PIX ULTIMATE - SSP PROFESSIONAL LIGHTING
User’s ManualKullanma Klavuzu
Filter 111 (Dark Pink)
35~36
Filter 115 (Peacock Blue)
37~38
Filter 126 (Mauve)
39~40
Filter 117 (Steel Blue)
41~42
Filter 118 (Light Blue)
43~44
Filter 122 (Fern Green)
45~46
Filter 182 (Light Red) 47~48
Filter 121 (Filter Green)
49~50
Filter 128 (Bright Pink)
51~52
Filter 131 (Marine Blue)
53~54
Filter 132 (Medium Blue)
55~56
Filter 134 (Golden Amber)
57~58
Filter 135 (Deep Golden Amber)
59~60
Filter 136 (Pale Lavender) 61~62
Filter 137 (Special Lavender)
63~64
Filter 138 (Pale Green)
65~66
Filter 798 (Chrysalis Pink)
67~68
Filter 141 (Bright Blue)
69~70
Filter 147 (Apricot)
71~72
Filter 148 (Bright Rose) 73~74
Filter 152 (Pale Gold)
75~76
Filter 154 (Pale Rose)
77~78
Filter 157 (Pink)
79~80
Filter 143 (Pale Navy Blue)
81~82
Filter 162 (Bastard Amber)
83~84
Filter 164 (Flame Red)
85~86
Filter 165 (Daylight Blue) 87~88
Filter 169 (Lilac Tint)
89~90
Filter 170 (Deep Lavender)
91~92
Filter 172 (Lagoon Blue)
93~94
Filter 194 (Surprise Pink)
95~96
Filter 180 (Dark Lavender)
97~98
Filter 181 (Congo Blue)
99~100
Filter 197 (Alice Blue) 101~102
Filter 201 (Full C.T. Blue)
103~104
Filter 202 (Half C.T. Blue)
105~106
Filter 203 (Quarter C.T. Blue)
107~108
Filter 204 (Full C.T. Orange)
109~110
Filter 219 (Fluorescent Green)
111~112
Filter 206 (Quarter C.T. Orange) 113~114
Filter 247 (Filter Minus Green)
115~116
Filter 248 (Half Minus Green)
117~118
Filter 281 (Three Quarter C.T. Blue)
119~120
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25

SSP OPTOPIXULTIMATE User manual

Category
Floodlights
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI