SSP Lighting Systems ~ 2 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
1 Understanding of Product
1.1 Security Warning
• When unpacking and before disposing of the carton, check if there is any
transportation damage before using the product. Should there be any damage
caused by transportation, consult your dealer and do not use the apparatus.
• Do not install the product or project the beam onto inflammable surfaces.
Minimum distance is 5M
• The product is only intended for installation, operation and maintenance by
qualified personnel. And read the user manual and labels on the lighting carefully
before use.
• Product should install in a cool place. Keep away from the wall 50cm.
• Do not look directly at the lamp light (especially for epilepsy), so as not to cause
damage to the eyes.
• Keep the optical system clean. Do not touch the LED lens with bare hands. Do not
use any alcohol liquid or any other liquid to clean the optical system. Use
medicinal absorbent cotton to clean it.
• Please do not attempt to dismantle and/or modify the product inner structure.
Otherwise, would not provide 1 year of free warranty.
• Electrical connection must only be carried out by qualified personnel.
• Before installation, ensure that the voltage and frequency of power supply match
the power requirement of the product.
• It is essential that each product is correctly earthed and that electrical
installation conforms to all relevant standards.
• Do not connect this device to any other types of dimmer apparatus.
• Make sure that the power-cord is never crimped or damaged by sharp edges.
Never let the power-cord come into contact with other cables. Only handle the
power-cord by the plug. Never pull out the plug by tugging the power-cord.
• There is no user serviceable parts inside the product, do not open the housing
and never operate the product with the cover removed.
• Place the unit where kids can't reach.
This product manual contains important information about the
safe installation and use of this product.Please read and follow
these instruction carefully and keep this manual in a safe place
for future reference.
SSP Lighting Systems ~ 3 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
1.2 Main Technical Parameters
Power supply
• Rated Voltage: AC90~240V
• Rated Frequency: 50~60Hz ± 10%
• Rated Power: 300W (Max)
LED
• LED Type: 32pcs ×12W RGBA 4in1 full-color super bright LED
• Control Pixel: 8 Pixel control points
• Drive Current: 680mA
• Colors: 16.7 million colors (0~100% saturation dimming)
• Life: 50,000 hours
Control
• Control Protocol: International standard DMX-512 signal
• Channel Protocol: 4 kinds DMX control channel modes. HSV, RGB, RGBA and
STAG modes can be chosen
• Control Mode: DMX-512, auto, master-slave and static mode
• Control Address Code: 512 DMX address codes, 61 ID address codes
Optical System
• Dimming Mode: Dimmer 0 means fast Linear dimming. Dimmer 1~3 stands for
soft Non-linear dimming.
• Dimmer: From 0~100 linear dimming.
• Dimming Curve: 4 dimming curves ( Linear, Exponential-1, Exponential-2, S-
Curve )
• Lens: Concentrated tilt Fresnel secondary optical lens
• Flashing rate: 1~20Hz
• Beam angle: 10° X 22°
If you have any questions,don't hesitate to consult our dealer or
manufacturer. Important: Before any installation, maintenance
and cleaning, please ensure that the power cut off!
SSP Lighting Systems ~ 4 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
Security
• Cooling System: Intelligent temperature control fan cooling mode
• Temperature Protection: 65℃
• Operating Environment: Indoor
• Working Temperature: -10°C ～40°C
Physical
• Dimensions: 638 * 180 * 203 mm
• Weight: 6.54 kg
• Surface treatment: High temperature black paint
• Housing color: Black (Can be customized)
• Connection: Signal cable IN/OUT, power cable IN/OUT.
Dimensions
1.3 Product Features
Using the latest LED control technique and newest intelligent LED Par light can
realize intelligent operation and control through its special menu at the back. This
product is designed for family party, wedding scene, small performances, DISCO
and KTV, bars, DiBa, volume vendor type KTV, ballroom,nightclub and various
performance occasion. Its main features include:
SSP Lighting Systems ~ 5 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
• 16 Bit dimming for each pixel point.
• SMT technology for control board and drive board make low failure rate.
• Using concentrated tilt light Fresnel secondary optical lens makes color mixture
more evenly and high brighter.
• With many hardware optical fixtures.
• Fast change secondary optical system design.
• Static color settings (STATIC).
• The static power consumption of the control panel is 0.3W, and its efficiency will
reach up to 97%
• Refresh rate of the lamp is 3Khz, suitable for all kinds of high demand situations.
• Linear dimming and nonlinear dimming (DIMMER).
• 4 dimming curves.
• White balance color setting (CAL).
• Overheating automatic protection function (Reduce working current).
• Liquid-crystal display screen.
• 4 kinds DMX working mode.
• Master-slave control, multi-units for synchronous control.
1.4 Product Packing Information
Following accessories are packed together with the product, please check them
carefully upon unpacking.
Spare parts Name
QTY
Unit
Remark
SSP OPTP PIX MEGA led light
1
piece
SSP OPTP PIX MEGA led light hanger
2
pieces
Hanger screw
2
pieces
Omega bracket and quick-lock fasteners
2
sets
Side hanging bracket
1
piece
User manual
1
piece
Power cable with plug
1
piece
SSP Lighting Systems ~ 6 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
2 Product Installation
2.1 Power Connection Method
Please connect power as following ：
L（live wire）= Brown wire
E（earth wire）= Yellow / green double color wire
N（null line）= Blue wire
When connecting power, ensure that the voltage and frequency of power supply
match the power requirement of the product.
This equipment belong to class 1 protection equipment, therefore, the yellow-
green double colors wire must be earthed correctly by qualified personnel. Before
installation, ensure that the voltage and frequency of power supply match the
power requirements of product. In power supply and voltage fluctuation large
areas, we suggest you to use 110V or 230V or use voltage regulator to supply
power. After electrical connection, this product will have a few seconds self-check
action, self-check finished can be used.
Input / output power cable should be 2.5 square millimeter copper core.
220V: 8 units may be connected in series.
110V: 4 units may be connected in series.
Important: It is essential that Yellow/green double color wire is correctly earthed
and that electrical installation conforms to all relevant standards.
2.2 DMX Connection Method
As this this fixture's DMX signal cable connection is Parallel connection, please
don’t more than 15 units. If the signal cable is over 60m between the DMX512
controller and fixture or between two fixtures, then a DMX signal amplifier is
needed.
SSP Lighting Systems ~ 7 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
2.2.1 When only set the DMX512 address code, no the ID code (STAG MODE), as
below:
XLR 3-pin Cable:
• The DMX interface of lamp needs be connected to the DMX controller.
• Since STAG MODE has 14 channels, the address code with 14 increment
increasing progressively (e.g., 1, 15, 29 ...).
• Every DMX address code can be reused as needed.
• DMX address code can be any data between 001 to 512.
Pin#
Function
1
Ground (Screen)
2
Data Minus
3
Data Plus
SSP Lighting Systems ~ 8 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
2.2.2 At the same time set the DMX512 address code and ID code (STAG MODE), as
below:
XLR 5-pin Cable:
• The DMX interface of lamp needs be connected to the DMX controller.
• Since STAG MODE has 14 channels, the address code with 14 increment
increasing progressively (e.g., 1, 15, 29 ...).
• Every DMX address code can be reused as needed.
• When the ID address code is 0, it is all in controlled. When ID address code is the
anyone of 1 to 61 that corresponding ID under controlled by CH14.
• DMX address code can be any data between 001 to 512.
2.3 Lamp Placement and Direction of Illumination
Opto Pix series fixtures are built with lenses that optimize the beam spread when
used on a wall or cyclorama. The side with square diffuse near-field micro lenses
should be adjacent to the wal or cycloramal. The side with hexagonal far-field micro
lenses is indicated should be facing away from the wall or cyclorama. See the
illustration below.
Pin#
Function
1
Ground (Screen)
2
Data Minus
3
Data Plus
4
Spare Data Minus
5
Spare Data Plus
SSP Lighting Systems ~ 9 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
2.4 Quickly Changing Lenses or hardware fixtures
Opto Pix series have the functions of quick changing lenses and hardware fixture.
Various ideal spot light effects can be achieved by changing lenses. There are two
kinds of optical hardware fixtures present different aesthetic feeling for your
choice. Using the lock catch type installment, may with ease disassemble. Rotate
the lock catch on side plate by counterclockwise 90 degrees to facilitate the
replacement of various lenses. See the illustration below.
Note: The direction of light can be changed by changing the
direction of the lenses.
SSP Lighting Systems ~ 10 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
3 Operation Method
3.1 Back panel functions introduction
• MENU: Menu button/return button, enter the menu selection interface or
previous menu.
• ENTER: Confirmation button,used to confirm the selected function.
• UP/DOWN: Upward/downward select function or Parameter increment /
decrement.
3.2 Menu Overview
NO.
LEVEL 1
MENU
LEVEL 2
MENU
LEVEL 3
MENU
FUNCTION
1
DMX Address
000~512
DMX address settings
2
ID Address
000~061
ID address settings
3 Channel mode
RGB
3CH
DMX channel mode settings
6CH BIT
6CH
12CH BIT
24CH
48CH BIT
RGBA
4CH
8CH BIT
8CH
16CH BIT
32CH
64CH BIT
STAG
14CH
HSV
3CH
4
Work mode
DMX
Working mode Settings, need to set the
SSP Lighting Systems ~ 11 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
STAR
corresponding mode to work normally
AUTO
5 Dimmer Dim off
Linear dimming curve
Dim 1~3
Nonlinear dimming curve
6
Auto
01~10
Auto effect settings
7
Auto speed
000~100
Auto speed settings
8 Static
Red
000~255
Static color settings
Green
000~255
Blue
000~255
Amber
000~255
9 CAL
Red
000~255
White balance settings
Green
000~255
Blue
000~255
Amber
000~255
10 Fan speed
Quiet
Fan off, total power output reduced by 20%.
Studio
Low speed, light output 100 %
Live
High speed, light output 100 %
AUTO
Temperature control mode, reach 40 °C begin to work
11 Dimmer curve
Linear
Light intensity increases linearly with DMX value
Exponential -1
Light intensity can be finely adjusted at lower DMX values and broadly
adjusted at higher DMX values.
Exponential -2
Light intensity can be broadly adjusted at lower DMX values and finely
adjusted at higher DMX values.
S-Curve
Light intensity can be finely adjusted at lower and higher DMX values
and broadly adjusted at medium DMX values.
12 KEY
YES
Password is:
UP+DOWN+UP+DOWN
NO
13
FW version
V1.0
Version number
14
Light temp
35℃
Temperature display
15 Restore
YES
Restore factory settings
NO
3.2.1 DMX Address Settings (DMX Address)
• Press【MENU】to find【DMX Address】menu and press【ENTER】to enter
address code setting.
• Press【UP/DOWN】button to select DMX address code.
• Press【ENTER】to confirm and the selected will be automatically saved.
•
3.2.2 ID Address Settings (ID Address)
• Press【MENU】to find【ID Address】menu and press【ENTER】to enter
address code setting.
• Press【UP/DOWN】button to select ID address code.
• Press【ENTER】to confirm and the selected will be automatically saved.
SSP Lighting Systems ~ 12 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
3.2.3 DMX Channel Mode Settings (Channel Mode)
• Press【MENU】to find【Channel Mode】menu and press【ENTER】to enter
DMX channel mode setting.
• Press【UP/DOWN】button to select【RGB】,【RGBA】,【STAG】or【HSV】4
kinds of channel modes.
• Press【ENTER】to confirm and the selected will be automatically saved.
3.2.4 Working Mode Settings (Work Mode)
• Press【MENU】to find【Work Mode】menu and press【ENTER】to enter
working mode setting.
• Press【UP/DOWN】button to select【DMX】mode or【AUTO】mode or
【STAR】static mode.
• Press【ENTER】to confirm and the selected will be automatically saved.
Note: Only in the corresponding working mode the function control can be
available.
3.2.5 Linear and Nonlinear Dimming Settings (Dimmer)
• Press【MENU】to find【Dimmer】menu and press【ENTER】to enter linear or
nonlinear dimming mode setting.
• Press【UP/DOWN】button to select【Dimmer 0】normal linear dimming or
【Dimmer1~3】nonlinear dimming.
• Press【ENTER】to confirm and the selected will be automatically saved.
3.2.6 Auto Effect Settings (Auto)
• Select【Auto】working mode according to 3.2.4 working mode setting.
• Press【MENU】to find【Auto】menu and press【ENTER】to enter auto effect
setting.
• Press【UP/DOWN】button to select the auto effect you needed.
• Press【ENTER】to confirm and the selected will be automatically saved.
SSP Lighting Systems ~ 13 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
3.2.7 Auto Effect Speed Settings (Auto Speed)
• Select【Auto】mode according to 3.2.6 auto effect mode setting.
• Press【MENU】to find【Auto Speed】menu and press【ENTER】to enter auto
speed setting.
• Press【UP/DOWN】button to select the auto speed you needed.
• Press【ENTER】to confirm and the selected will be automatically saved.
3.2.8 Static Color Settings (Static)
• Select【STAR】mode according to 3.2.4 working mode setting.
• Press【MENU】to find【STATIC】menu and press【ENTER】to enter static
color setting.
• Press【UP/DOWN】button to select the color and brightness you needed.
• Press【ENTER】to confirm and the selected will be automatically saved.
3.2.9 White Balance Settings (CAL)
• Press【MENU】to find【CAL】menu and press【ENTER】to enter white
balance color setting.
• Press【UP/DOWN】button to select the color and brightness you needed.
• Press【ENTER】to confirm and the selected will be automatically saved.
Note: CAL White balance color setting is set as the global color setting of the
entire light, and all color effect running according to CAL menu setting.
3.2.10 Fan Speed Settings (Fan Speed)
• Press【MENU】to find【Fan Speed】menu and press【ENTER】to enter fan
speed setting.
• Press【UP/DOWN】button to select the fan speed you needed.
• Press【ENTER】to confirm and the selected will be automatically saved.
SSP Lighting Systems ~ 14 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
3.2.11 Dimming Curve Settings (Dimmer Curve)
• Press【MENU】to find【Dimmer Curve】menu and press【ENTER】to enter
dimming curve setting.
• Press【UP/DOWN】button to select 【Linear】,【Exponential-1】,
【Exponential-2】or【S-Curve】4 kinds of dimming curve.
• Press【ENTER】to confirm and the selected will be automatically saved.
3.2.12 Key Lock Settings (Key)
• Press【MENU】to find【Key】menu and press【ENTER】to enter key lock
setting.
• Press【UP/DOWN】button to select【ON】or【OFF】.
• Press【ENTER】to confirm and the selected will be automatically saved.
• Unlock password is【UP + DOWM + UP + DOWM + ENTER】.
3.2.13 Restore Factory Settings (Restore)
• Press【MENU】to find【Restore】menu and press【ENTER】to enter restore
factory setting.
• Press【UP/DOWN】button to select【YES】or【NO】.
• After setting【YES】, press【ENTER】key to restore factory settings.
Restore factory settings parameters:
1. DMX 512 = 001 7. AUTO Speed = 50
2. ID = 000 8. Static = R000 / G000 / B000 / A000
SSP Lighting Systems ~ 15 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
3. Channel Mode = STAG 9.CAL = R255 / G255 / B255 / A255
4. Work Mode = DMX 10.Fan Speed = AUTO
5. Dimmer = Dimmer OFF 11.Dimmer Curve = Linear
6. AUTO = 01
4 Control Channel
4.1 RGB Control Channel Mode
4.1.1 RGB-3CH Mode
4.1.2 RGB-6CH 16Bit Mode
4.1.3 RGB-6CH Mode
4.1.4 RGB-12CH 16Bit Mode
Channel
Control function
Detail description
DMX Data
1 Red Dimming from 0~100% 0~255
2
Green
Dimming from 0~100%
0~255
3
Blue
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Red
Dimming from 0~100%
0~255
2
Red 16bit
Dimming from 0~100%
0~255
3 Green Dimming from 0~100% 0~255
4
Green 16bit
Dimming from 0~100%
0~255
5
Blue
Dimming from 0~100%
0~255
6
Blue 16bit
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Red1
Dimming from 0~100%
0~255
2
Green1
Dimming from 0~100%
0~255
3 Blue1 Dimming from 0~100% 0~255
4
Red2
Dimming from 0~100%
0~255
5
Green2
Dimming from 0~100%
0~255
6
Blue2
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Red1
Dimming from 0~100%
0~255
2
Red1 16bit
Dimming from 0~100%
0~255
3 Green1 Dimming from 0~100% 0~255
4
Green1 16bit
Dimming from 0~100%
0~255
5
Blue1
Dimming from 0~100%
0~255
SSP Lighting Systems ~ 16 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
4.1.5 RGB-24CH Mode
4.1.6 RGB-48CH 16Bit Mode
4.2 RGBA Control Channel Mode
4.2.1 RGBA-4CH Mode
6
Blue1 16bit
Dimming from 0~100%
0~255
7
Red2
Dimming from 0~100%
0~255
8
Red2 16bit
Dimming from 0~100%
0~255
9
Green2
Dimming from 0~100%
0~255
10
Green2 16bit
Dimming from 0~100%
0~255
11
Blue2
Dimming from 0~100%
0~255
12 Blue2 16bit Dimming from 0~100% 0~255
Channel
Control function
Detail description
DMX Data
1 Red1 Dimming from 0~100% 0~255
2
Green1
Dimming from 0~100%
0~255
3
Blue1
Dimming from 0~100%
0~255
......
......
......
......
22
Red4
Dimming from 0~100%
0~255
23
Green4
Dimming from 0~100%
0~255
24
Blue4
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Red1
Dimming from 0~100%
0~255
2
Red1 16bit
Dimming from 0~100%
0~255
3
Green1
Dimming from 0~100%
0~255
4
Green1 16bit
Dimming from 0~100%
0~255
5
Blue1
Dimming from 0~100%
0~255
6
Blue1 16bit
Dimming from 0~100%
0~255
......
......
......
......
43
Red4
Dimming from 0~100%
0~255
44
Red4 16bit
Dimming from 0~100%
0~255
45
Green4
Dimming from 0~100%
0~255
46
Green4 16bit
Dimming from 0~100%
0~255
47
Blue4
Dimming from 0~100%
0~255
48
Blue4 16bit
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Red
Dimming from 0~100%
0~255
2
Green
Dimming from 0~100%
0~255
SSP Lighting Systems ~ 17 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
4.2.2 RGBA-8CH 16Bit Mode
4.2.3 RGBA-8CH Mode
4.2.4 RGBA-16CH 16Bit Mode
3
Blue
Dimming from 0~100%
0~255
4
Amber
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Red
Dimming from 0~100%
0~255
2
Red 16bit
Dimming from 0~100%
0~255
3
Green
Dimming from 0~100%
0~255
4
Green 16bit
Dimming from 0~100%
0~255
5 Blue Dimming from 0~100% 0~255
6
Blue 16bit
Dimming from 0~100%
0~255
7
Amber
Dimming from 0~100%
0~255
8
Amber 16bit
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Red1
Dimming from 0~100%
0~255
2 Green1 Dimming from 0~100% 0~255
3
Blue1
Dimming from 0~100%
0~255
4
Amber1
Dimming from 0~100%
0~255
5
Red2
Dimming from 0~100%
0~255
6
Green2
Dimming from 0~100%
0~255
7
Blue2
Dimming from 0~100%
0~255
8
Amber2
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Red1
Dimming from 0~100%
0~255
2
Red1 16bit
Dimming from 0~100%
0~255
3
Green1
Dimming from 0~100%
0~255
4
Green1 16bit
Dimming from 0~100%
0~255
5
Blue1
Dimming from 0~100%
0~255
6 Blue1 16bit Dimming from 0~100% 0~255
7
Amber1
Dimming from 0~100%
0~255
8
Amber1 16bit
Dimming from 0~100%
0~255
9
Red2
Dimming from 0~100%
0~255
10
Red2 16bit
Dimming from 0~100%
0~255
11
Green2
Dimming from 0~100%
0~255
12 Green2 16bit Dimming from 0~100% 0~255
13
Blue2
Dimming from 0~100%
0~255
14
Blue2 16bit
Dimming from 0~100%
0~255
15
Amber2
Dimming from 0~100%
0~255
16
Amber2 16bit
Dimming from 0~100%
0~255
SSP Lighting Systems ~ 18 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
4.2.5 RGBA-32CH Mode
4.2.6 RGBA-64CH 16Bit Mode
4.3 STAG Control Channel Mode
STAG-14CH Mode
Channel
Control function
Detail description
DMX Data
1
Red1
Dimming from 0~100%
0~255
2
Green1
Dimming from 0~100%
0~255
3
Blue1
Dimming from 0~100%
0~255
4
Amber1
Dimming from 0~100%
0~255
......
......
......
......
29
Red4
Dimming from 0~100%
0~255
30
Green4
Dimming from 0~100%
0~255
31 Blue4 Dimming from 0~100% 0~255
32
Amber4
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Red1
Dimming from 0~100%
0~255
2
Red1 16bit
Dimming from 0~100%
0~255
3
Green1
Dimming from 0~100%
0~255
4
Green1 16bit
Dimming from 0~100%
0~255
5
Blue1
Dimming from 0~100%
0~255
6 Blue1 16bit Dimming from 0~100% 0~255
7
Amber1
Dimming from 0~100%
0~255
8
Amber1 16bit
Dimming from 0~100%
0~255
......
......
......
......
57
Red4
Dimming from 0~100%
0~255
58
Red4 16bit
Dimming from 0~100%
0~255
59
Green4
Dimming from 0~100%
0~255
60 Green4 16bit Dimming from 0~100% 0~255
61
Blue4
Dimming from 0~100%
0~255
62
Blue4 16bit
Dimming from 0~100%
0~255
63
Amber4
Dimming from 0~100%
0~255
64
Amber4 16bit
Dimming from 0~100%
0~255
Channel
Control function
Detail description
DMX Data
1
Overall dimmer
Dimming from 0~100%
0~255
2 Strobe
NO FUNCTION
0~15
From low to fast
16~214
Random strobe
215~255
3 Color effect NO FUNCTION
0~17
Red
18~35
SSP Lighting Systems ~ 19 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
Green
36~53
Blue
54~71
Yellow
72~89
Purple
90~107
Cyan
108~125
White
126~143
Red green red green 144~161
Red red blue blue
162~179
Yellow yellow cyan cyan
180~197
Green purple purple green
198~215
Rainbow effect jump changing
216~233
Rainbow effect gradual changing
234~255
4
Color changing speed
From low to fast
0~255
5 Pattern effect
All light on 0~15
Pixel 1
16~31
Pixel 2
32~47
Pixel 3
48~63
Pixel 4
64~79
Pixel 1/2
80~95
Pixel 3/4 96~111
Pixel 1/4
112~127
Pixel 2/3
128~143
Pixel 1/3
144~159
Pixel 2/4
160~175
Pixel 1 ~4 racing effect in pixel by
pixel
176~191
2 pixels
Synchronous
racing effect
192~207
Pixel 1/3, pixel 2/4 racing effect
208~223
Pixel 1/4, pixel 2/3 racing effect
224~239
Pixel 1 ~4 racing effect by increase in
pixel to pixel
240~255
6 Pattern changing speed From low to fast 0~255
7 COLOR MACRO
NO FUNCTION (0=default)
0~0
Filter 4 (Medium Bastard Amber)
1~2
Filter 25 (Sunset Red)
3~4
Filter 19 (Fire)
5~6
Filter 26 (Bright Red)
7~8
Filter 58 (Lavender)
9~10
Filter 68 (Sky Blue) 11~12
Filter 36 (Medium Pink)
13~14
Filter 89 (Moss Green)
15~16
Filter 88 (Lime Green)
17~18
Filter 90 (Dark Yellow Green)
19~20
Filter 49 (Medium Purple)
21~22
SSP Lighting Systems ~ 20 ~ www.sspworld.com
OPTO PIX MEGA - SSP PROFESSIONAL LIGHTING
User’s Manual – Kullanma Klavuzu
Filter 52 (Light Lavender)
23~24
Filter 102 (Light Amber)
25~26
Filter 103 (Straw)
27~28
Filter 140 (Summer Blue)
29~30
Filter 124 (Dark Green)
31~32
Filter 106 (Primary Red)
33~34
Filter 111 (Dark Pink) 35~36
Filter 115 (Peacock Blue)
37~38
Filter 126 (Mauve)
39~40
Filter 117 (Steel Blue)
41~42
Filter 118 (Light Blue)
43~44
Filter 122 (Fern Green)
45~46
Filter 182 (Light Red)
47~48
Filter 121 (Filter Green) 49~50
Filter 128 (Bright Pink)
51~52
Filter 131 (Marine Blue)
53~54
Filter 132 (Medium Blue)
55~56
Filter 134 (Golden Amber)
57~58
Filter 135 (Deep Golden Amber)
59~60
Filter 136 (Pale Lavender) 61~62
Filter 137 (Special Lavender)
63~64
Filter 138 (Pale Green)
65~66
Filter 798 (Chrysalis Pink)
67~68
Filter 141 (Bright Blue)
69~70
Filter 147 (Apricot)
71~72
Filter 148 (Bright Rose)
73~74
Filter 152 (Pale Gold) 75~76
Filter 154 (Pale Rose)
77~78
Filter 157 (Pink)
79~80
Filter 143 (Pale Navy Blue)
81~82
Filter 162 (Bastard Amber)
83~84
Filter 164 (Flame Red)
85~86
Filter 165 (Daylight Blue)
87~88
Filter 169 (Lilac Tint) 89~90
Filter 170 (Deep Lavender)
91~92
Filter 172 (Lagoon Blue)
93~94
Filter 194 (Surprise Pink)
95~96
Filter 180 (Dark Lavender)
97~98
Filter 181 (Congo Blue)
99~100
Filter 197 (Alice Blue) 101~102
Filter 201 (Full C.T. Blue)
103~104
Filter 202 (Half C.T. Blue)
105~106
Filter 203 (Quarter C.T. Blue)
107~108
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
