2. PAC
  3. TOYK960

PAC TOYK960, BKTOYK960 User manual

  • Hello! I am an AI chatbot trained to assist you with the PAC TOYK960 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What tools are needed to install the PAC BKTOYK960?
    How do I remove the factory radio?
    How do I install the ISO brackets?
    How do I install the DIN sleeve?
©2015 AMERICAN INTERNATIONAL INDUSTRIES, INC.
TOYK960 Mounting Kit
Toyota
2003-08 COROLLA
VEHICLE APPLICATIONS
CUSTOMER HELP LINE
USA 800-323-4329 • Canada 800-245-8777
ITOYK960
TECH Ver. 12/13 PRINT Ver. 2/15
WWW.AIUS.NET
2500 East Francis Street Ontario, CA 91761, U.S.A.
USA Sales (800) 336-6500
Canada Sales (888) 922-3006
For information about other American International automotive
accessories visit our website at:
http://www.aius.net
DASH DISASSEMBLY INSTRUCTIONS
1. Carefully remove the trim around the shift lever (unscrew shift knob for manual
shift vehicles).
2. Carefully pull on the middle climate control knob and remove. Remove the (1) phillips
screw from this location.
3. Carefully pry the climate controls and pocket assembly forward, disconnect all
harnesses and remove assembly.
4. Remove the (4) 10mm bolts securing the factory radio to the sub-dash.
5. Carefully pry Radio/Vent assembly forward, disconnect all harnesses and antenna
lead end remove assembly.
6. Carefully remove radio from Vent assembly.
ISO MOUNT INSTALLATION INSTRUCTIONS
1. Attach ISO brackets to the rear of the main mounting kit (see Fig. B).
2. Insert spacers into brackets on both sides only when ISO mounting radio (see Fig. C).
3. Slide radio into kit from rear & attach to ISO mounting brackets using screws supplied
with radio (do not tighten screws at this time).
4. Slide radio forward or backward for your desired look and then tighten the mounting
screws. Use ISO trim ring when possible.
5. Attach rear support strap (supplied with radio) to rear of pocket and to rear of radio.
1. Insert DIN sleeve from your new radio into the radio opening of the installation kit.
2. Depress the tabs from inside the sleeves opening upward, outward, and downward
to secure metal sleeve to the installation kit.
DIN MOUNT INSTALLATION INSTRUCTIONS
1 2
2003-08 TOYOTA COROLLA
INSERT SPACERS INTO
BRACKETS ON BOTH SIDES ONLY
WHEN ISO MOUNTING RADIO
FOR ISO MOUNT APPLICATIONS
INSERT LEFT AND RIGHT MOUNTING BRACKETS INTO
RADIO OPENING AS SHOWN BELOW AND SECURE TO
BACK OF POCKET USING SCREWS PROVIDED
I
TR-960
MB-960 L&R
I
SO
TRI
M
RI
NG
NOTE: POCKET MUST BE ON TOP
NOTE: POCKET MUST BE ON TOP
D
IN Sleev
e
ITR 960
Trim Ring
(Optional Use)
MB-960 R
MB-960 R
FIGURE A
FIGURE C
FIGURE B
ISO Spacers
INSERT LEFT AND RIGHT MOUNTING BRACKETS INTO
RADIO OPENING AS SHOWN BELOW AND SECURE
TO BACK OF POCKET USING SCREWS PROVIDED
/