2. Simply Retrofits
  3. PIR 3CCT
PIR 3CCT

Simply Retrofits PIR 3CCT User manual

  • I have reviewed the provided instructions for the Simply Retrofits 3CCT Adjustable Flush Mount Fixture. The document details the installation process, covering steps like power disconnection, color temperature selection and bracket mounting. I am ready to assist with your questions regarding this device.
  • What should I do before installing?
    How do I install the mounting bracket?
    What wires need to be connected?
AA BB CC
DD EE FF
Part Description Quantity
AA 1
BB Mounting bracket 1
CC 4 in. mounting clip spring 3
3
2
3
DD 4 in. mounting clip spring screws
EE J-Box mounting screws
FF Wire connectors
www.simplyretrofits.com
PIR
www.simplyretrofits.com
□Use the slide switch to choose a color
temperature before installing.
3K
3K
4K
5K
3000K
4K
4000K
5K
5000K
Fig.1
Fig.2
1Turning Off the Power
3Connecting the wires
6Optional
2Choosing a color temperature
before installing
□Turn the power OFF at the switch and fuse box or the
circuit breaker.
□Identify the wiring: (Black - line voltage, White - neutral)
□Connect the stripped wires to the two wires coming
from the J-box: Black - line voltage to Black, White -
neutral to White, using wire connectors provided (FF).
4Installing the mounting
bracket to the junction box
5mounting bracket
□Install the mounting bracket (BB) to the J-box by
inserting the two mounting screws (EE) through the slots
in mounting bracket (BB).
□Make sure the mounting bracket (BB) is installed with
the label facing downwards. (Fig. 3)
□
Fig. 4
BB
AA
Fig. 3
EE BB
www.simplyretrofits.com
FF
EE
AA
BB
Fig. 3 Fig. 4
CC
DD
BB
PIR
www.simplyretrofits.com
/