Planet Technology WBS-900AC-KIT Installation guide

Brand: Planet Technology

Model: WBS-900AC-KIT

Type: Installation guide

Planet Technology WBS-900AC-KIT is a powerful outdoor CPE kit designed for long-range wireless connectivity. It provides high-speed data transmission up to 900Mbps with TDMA technology, making it ideal for point-to-point (PtP) connections. The kit includes two WBS-900AC CPEs, parabolic reflectors, antenna feeds, mounting accessories, and PoE power adapters. With its rugged construction and weatherproof design, the WBS-900AC-KIT can withstand harsh outdoor conditions, making it suitable for various applications such as wireless internet access, video surveillance, and data backhaul.

5GHz 802.11ac 900Mbps TDMA Outdoor

Long Range Wireless CPE Kit

WBS-900AC-KIT

Quick Installation Guide

Table of Contents

1. Package Contents ................................................................................. 3

2. Physical Introduction ............................................................................ 5

3. Hardware Installation ............................................................................ 6

4. WiredNetworkConguration(Windows) ................................................. 8

5. Entering into the Web Management ....................................................... 9

6. EasytoSetUpTDMAmode(PtP)Connection ....................................... 10

FURTHER INFORMATION ........................................................................... 11

1. Package Contents

Thank you for choosing PLANET TDMA Outdoor Long Range Wireless CPE

Kit. Before installing, please verify the contents inside the package box. The

"WBS-900AC-KIT" mentioned here is the model name of the device.

WBS-900AC CPE x 2 ParabolicReectorx2 Antenna Feed x 2

L Clip x 2 Clip x 2 Square Clamp x 4

Hex Nut x 8 Nut x 4 Support Ring x 2

Screw & Gasket x 8 Screw x 8 Mounting Strap x 2

QR Code Sheet AP Stand x 2 Waterproof Cover x 2

Let’s get started with your PLANET product

WBS-900AC-KIT

EN Please scan the QR code to browse our online User’s Manual or Quick

Installation Guide and follow the instructions to complete the setup.

Quick

Installation

Bitte scannen Sie den QR- Code sie werden per Browser zur

Bedienungsanleitung oder Schnellanleitung weiter geleitet. Folgen Sie den

Anweisungen um die Installation abzuschließen.

Veuillez scanner le code QR pour obtenir notre Notice d’Utilisation en

ligne ou notre Guide d’Installation Rapide et suivez les instructions pour

compléter la conguration

Escanee el código QR para encontrar el Manual del Usuario en línea o

la Guía de Instalación Rápida y siga las instrucciones para completar la

conguración.

IT Scansiona il codice QR per consultare online il Manuale utente o la Guida di

installazione rapida e segui le istruzioni per completare la congurazione.

PT Por favor, escaneie o QR code para navegar no Manual do Usuário ou Guia

de Instalação Rápida. Siga as instruções para completar a conguração.

Zeskanuj kod QR, aby otworzyć naszą internetową instrukcję obsługi

lub instrukcję szybkiej instalacji. Postępuj zgodnie z instrukcjami, aby

zakończyć poprawną kongurację.

One word modify: Отсканируйте QR-код, чтобы просмотреть наше

онлайн-руководство пользователя или руководство по быстрой

настройке, и следуйте инструкциям для завершения настройки

RO Te rugam sa scanezi codul QR, pentru a descarca User’s Manual sau Quick

Installation Guide si a urmari instructiunile necesare in nalizarea instalarii

Need more help?

PLANET online FAQs:

http://www.planet.com.tw/en/support/faq

Technical Support: [email protected]

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp.

All other trademarks belong to their respective owners.

Part No. 2341-E10780-000

EU Wireless Use Restriction

This device is restricted to indoor use

when operating in the 5150 to 5350

MHz freguency range. This restriction

applies in: AT, BE, BG, CH, C Y, CZ, DE,

DK, EE, EL, ES, FI, FR, HR, HU, IE, IS,

IT, LI, LT, LU, L V, M T, NL, NO, PL, P T,

RO, SE, SI, SK, TR, UA.

PoE Power Adapter x 2 RF Cable x 4 Power Cable x 2

If there is any item missing or damaged, please contact the

seller immediately.

IMPORTANT SAFETY PRECAUTIONS:

1. LIVES MAY BE AT RISK! Please be aware of the elec-

trical wires around. Carefully read the section “OUTDOOR

INSTALLATION WARNING” in the manual before installa-

tion.

2. Users MUST complete grounding wired with the device;

otherwise, a sudden lightning could cause fatal damage to

the device. EMD (Lightning) DAMAGE IS NOT COVERED

UNDER WARRANTY.

2. Physical Introduction

Hardware Description

Reset/Pair

PoELAN

PtP Switch

DC Power

To power up the CPE, please use the PoE power adapter

included in the package or end-span PoE switch.

3. Hardware Installation

Step 1: Installing Antenna Set and AP Stand

Step 2: Connecting Antenna to CPE with RF Cable

Step 3: Push the latch on the bottom of the Outdoor Wireless CPE to remove

the sliding cover.

Step 4: Plug the RJ45 Ethernet cable into the PoE Port of the Outdoor

WirelessCPE.Then,slidebackthecovertonishtheinstallation.

Step 5: Place the Outdoor Wireless CPE on the AP stand

4.WiredNetworkConguration(Windows)

A computer with wired Ethernet connection is required for the rst-time

congurationoftheWirelessAP.

1. Click the “Start” button located at the lower-left corner of your computer.

2. Select “Control Panel-> Network and Shari ng Center”.

3. Click “Change adapter settings”.

4. Double-click “Local Area Connection”.

5. Select “Internet Protocol Version 4 (TCP/IPv4)” and click “Proper-

ties”.

6. Select “Use the following IP address” to congure the IP address to

"192.168.1.x"("x" can be any number from 2 to 254, except 253) and

then click the “OK”buttontosavetheconguration.

5. Entering into the Web Management

Default Master IP Address: 192.168.1.253

Default Slave IP Address: 192.168.1.100

Default Username: admin

Default Password: admin

Default SSID: PLANET_5G

Step 1: Launch the Web browser and enter the default Master IP address

http://192.168.1.253.

Step 2: The default username and password are “admin”. Then click the

For security reasons, it is recommended to change the password

at the first login and memorize it.

6.EasytoSetUpTDMAmode(PtP)Connection

Step 1: (1) Position “Slave” to “Master” on the master AP. Stay in

“Slave” on the slave AP.

 (2) Pressthe“Reset/Pair” button within 2 minutes on both sides.

 (3) Theconnectionwillbeestablishedeasily.

3 Steps to Set Up TDMA Mode (PtP) Connection

Connecting

Connected

Master and Slave

have been connected

Position “Slave” to “Master” on master AP

Step 1 Step 2 Step 3

(Master) (Slave)

Slave

Master

PtP Mode

Slave

Master

PtP Mode

(Master)

Slave

Master

PtP Mode

Slave

Master

PtP Mode

(Slave)

Press Reset button for 2 seconds

and wait for 2 mins

The connection should be established within 2 minutes, and

when complete, the signal strength LED will light up. The LED

will display 1 to 4 lights based on the signal strength, with all 4

LEDs indicating a strong signal.

FURTHER INFORMATION

The above steps introduce the simple installations and congurations of the

device. For further congurations, please refer to the user manual, which can

be downloaded from the website.

WBS-Series:

https://www.planet.com.tw/en/support/downloads?&method=keyword&keyword

=WBS&view=3#list

Planet Technology WBS-900AC-KIT Installation guide

Planet Technology WBS-900AC-KIT Installation guide

Planet Technology WBS-900AC-KIT Installation guide

Related papers

Other documents