2. Razor
  3. W13113202178
W13113202178

Razor W13113202178 User manual

  • Hello! I'm your chat assistant and I have reviewed the user manual for the Razor Collar Clamp A5 W13113202178. This document provides guided instructions for replacing the collar clamp of your scooter, with particular focus on safety precautions before beginning the replacement. I'm ready to help you with any questions you might have about this procedure or the device.
  • What tool is required for the collar clamp replacement?
    What should be done before starting the replacement process?
    How long should the battery be charged before first use?
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
1
WARNING
Step 1 Step 2
Required Tools: (Not included)
A. 5 mm Allen wrench
CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect
charger before conducting any assembly or maintenance procedures. Failure to follow these
steps in the correct order may cause irreparable damage.
Using a 5 mm Allen wrench, loosen the bolt from the
collar clamp. Slide the stem off from the fork.
Slide collar clamp off from the stem and remove the bolt
from the collar clamp completely. This will allow you to
pass the collar clamp through the throttle cable.
POWER A5
COLLAR CLAMP REPLACEMENT PROCEDURES
PART # W13113202178
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
2
Step 3
Reverse the steps.
ATTENTION: Charge battery 10 hours before using.
/