zowieTek 90950-220 User manual

Type
User manual

The zowieTek 90950-220 is a versatile PTZ camera controller that offers both IP and analog control options, making it compatible with a wide range of cameras. With four control modes (IP VISCA, ONVIF, RS422, and RS232) and three control protocols (VISCA, ONVIF, and PELCO), this controller provides flexible control options for various camera setups.

The zowieTek 90950-220 is a versatile PTZ camera controller that offers both IP and analog control options, making it compatible with a wide range of cameras. With four control modes (IP VISCA, ONVIF, RS422, and RS232) and three control protocols (VISCA, ONVIF, and PELCO), this controller provides flexible control options for various camera setups.

Zowietek Universal IP PTZ Camera Controller User Manual
0
Universal IP PTZ Camera
Controller User Manual
Revision
Ver. 1.1.0
Release
2021-10-27
Product
90950-220
Zowietek Universal IP PTZ Camera Controller User Manual
1
Attentions
The purpose of this user manual is to ensure that users can use the product correctly and avoid
danger and damage in operation. Before using this product, please read this user manual carefully
and keep it properly for future reference.
Precautions
1. What is the function of CAM NUM when adding a network device?
CAM NUM button will be associated and bound with the currently entered IP and port
information.
The CAM NUM button set through adding devices with the CAM button can be used to switch to
any devices bound with the CAM NUM button.
2. How to enter English when setting the user name, password and custom keys of F1/ F2.
For example: to enter letter C, simply press the number key “2” three times continuously in the
input interface.
3. How to enter IP address?
The camera controller doesn't have a "." button; So please enter the IP address with four segments.
Take IP address 192.168.0.1 for example, it will automatically jump to the next segment when
finished input 192 and 168; while after input 0, you have to move the joystick rightward to switch
to the next segment input.
4. How to clear in input mode?
Move the joystick leftward to clear the input information.
5. The home page of each mode refers to the displayed page when controller initialization
is completed.
In IP VISCA and ONVIF Mode, if you see the prompts of "Visca!” and “ONVIF!”, the IP address
displayed on the screen is the local IP address of the controller. While the prompts of “Visca:” and
ONVIF:” are shown on the page, the IP address displayed on the screen belongs to the connected
device.
Zowietek Universal IP PTZ Camera Controller User Manual
2
Content
ATTENTIONS .................................................................................................................................. 1
PRECAUTIONS ............................................................................................................................... 1
1. Product Overview ....................................................................................................................... 3
1.1 Product Features .................................................................................................................... 3
1.2 Connection Diagram (IP Protocol) .......................................................................................... 3
1.3 Technical Specifications .......................................................................................................... 4
2. Function Description ..................................................................................................................... 4
2.1 Button Description ................................................................................................................ 4
2.2 Rocker Switch and Knob ........................................................................................................ 6
2.3 Joystick Control ...................................................................................................................... 7
2.4 Terminal Description of Back Panel Interfaces ..................................................................... 7
3. Local Settings (SETUP) ................................................................................................................ 8
3.1 Basic Settings .......................................................................................................................... 8
3.2 VISCA & IP VISCA Mode shared Setting .............................................................................. 8
3.3 IP VISCA Mode Setting .......................................................................................................... 8
3.4 VISCA Mode Setting............................................................................................................... 9
3.5 PELCO Mode Setting .............................................................................................................. 9
3.6 ONVIF Mode Setting .............................................................................................................. 9
4. Connection and Control .............................................................................................................. 9
4.1 Connection and Control in ONVIF Mode ............................................................................... 9
4.2 Connection and Control in IP VISCA Mode ......................................................................... 10
4.3 Control in VISCA & PELCO Mode ...................................................................................... 10
5. Web Page Configuration ............................................................................................................. 11
5.1 Home Page ............................................................................................................................ 11
5.2 LAN Settings ....................................................................................................................... 12
5.3 Upgrade ................................................................................................................................. 12
5.4 Restore Factory ..................................................................................................................... 12
5.5 Reboot ................................................................................................................................... 13
Copyright Statement ....................................................................................................................... 13
Zowietek Universal IP PTZ Camera Controller User Manual
3
1. Product Overview
1.1 Product Features
Four control modes: Two IP control modes (IP VISCA & ONVIF); Two analog control modes
(RS422 & RS232)
Three Control Protocols: VISCA, ONVIF and PELCO
1.2 Connection Diagram (IP Protocol)
Make sure the controller and PTZ camera are connected to the same LAN. Besides, the IP
addresses of the controller and PTZ camera must be at the same segment.
For example:
192.168.5.123 is at the same segment with 192.168.5.111
192.168.5.123 is not at the same segment with 192.168.0.125
The default setting for the IP controller is obtaining the IP address dynamically.
Zowietek Universal IP PTZ Camera Controller User Manual
4
1.3 Technical Specifications
2. Function Description
2.1 Button Description
Ethernet One Ethernet port
Joystick Four-dimensional (up, down, left, right) joystick control and clock,
Zoom Tele/Wide
Connection Lead
Display LCD
Prompt Tone Button Sound Prompts Open/Off
Power supply DC 12V1A±10%
Power Consumption 0.6 W Max
Operating Temperature 0°C-50°C
Storage Temperature -20-70°C
Dimensions(mm) 320*180*100
Zowietek Universal IP PTZ Camera Controller User Manual
5
[AUTO FOCUS]
Auto Focus button: Set the camera in auto focus mode with this button. It will light up when the
camera is in manual focus mode.
[AE AUTO]
Auto Aperture button: Set the camera in automatic aperture mode with this button. It will light up
when the camera is in manual aperture mode.
[CAMERA OSD]
Camera OSD button: call/Close the camera OSD
[HOME]
HOME button: The camera will back to home position if camera OSD is off. While when the
camera OSD is called out, the home button is the confirm function of camera OSD.
[F1] ~ [F2]
Custom function buttons: Custom functions in VISCA and IP VISCA modes.
[SETUP]
Controller local Settings button: Modify and view local settings.
[SEARCH]
Search button: Search for all available devices with ONVIF protocol in the LAN (only in ONVIF
Mode)
[INQUIRE]
Inquire button: Check added devices
[WBC MODE]
Auto white balance button: Set the camera in auto white balance mode. It will light up when the
camera is in manual white balance mode.
[CAM1] ~ [CAM4]
Quickly switch device button: Quickly switch to CAM NUM 1-4 devices (ONVIF, IP VISCA), or
to address 1-4 devices (VISCA, PELCO)
[PRESET]
Short press to set presets; long press to delete presets setting.
It needs to work with the number keys and “enter” button, for setting or deleting presets.
Zowietek Universal IP PTZ Camera Controller User Manual
6
[CALL]
Call preset button: It needs to work with the number keys and ENTER button.
[IP]
Manually add network device button:
Manually add network devices (only in ONVIF and IP VISCA modes)
[CAM]
In IP VISCA and ONVIF modes, it will quickly switch to the CAM NUM bound device when
adding a device via CAM.
In VISCA and PELCO modes, it will switch to the address when entering a certain address.
It needs to work with the number keys and “enter” button.
[1] ~ [9]
Number keys of 0,1,2,3,4,5,6,7,8,9.
2,4,6,8 serve as direction keys as well, which could control pan and tilt rotation, and camera OSD.
[ESC]Return
[ENTER]Confirm Button
2.2 Rocker Switch and Knob
[NEAR][FAR]Manually adjust the focal length.
[OPEN][CLOSE]Manually adjust the aperture, OPEN(Aperture Plus)/CLOSE(Aperture minus)
[R-][R+]Manually adjust the Red Gain
[B-][B+]Manually adjust the Blue Gain
[PTZ SPEED-][PTZ SPEED+]Adjust PTZ Speed, Gears 1 (Slow)- 8(Fast)
Zowietek Universal IP PTZ Camera Controller User Manual
7
[T-ZOOM-W] Zoom Tele and Zoom Wide.
2.3 Joystick Control
2.4 Terminal Description of Back Panel Interfaces
Back Panel Details: RS422, RS232, DC-12V, Ethernet, Power Switch
Number Label Physical interface Description
RS422
Control Output
(TA, TB, RA, RB)
1. Connect to RS422 bus of the camera: TA to
camera RA; TB to camera RB; RA to camera
TA; RB to camera TB.
Ground Control line ground (G Control signal Line ground
ETHERNET Ethernet port Network connection
DC-12V Power input DC 12V Power input
Zowietek Universal IP PTZ Camera Controller User Manual
8
POWER Power switch Power on/ off
3. Local Settings (SETUP)
3.1 Basic Settings
Move the joystick up and down to switch 1 to 2, and 2 to 3 settings; Move the joystick left and
right to switch on and off the button sound prompts, confirm with the ENTER button.
(1) Network Type: dynamic and static
(2) Button sound prompt: on and off
(3) Language setting: Chinese and English
(4) Mode: VISCA, IP VISCA, ONVIF, PELCO
(5) Version information
(6) Restore factory settings
(7) Local IP
3.2 VISCA & IP VISCA Mode shared Setting
(1) F1: Custom function for F1 button (VISCA command)
(2) F2: Custom function for F2 button (VISCA command)
Input custom name → ENTER → Input VISCA command
For example: the command is 8101040702FF, then input 01040702 (0 can’t be omitted)
3.3 IP VISCA Mode Setting
Delete the saved device:
Move the joystick up and down to view devices; Move the joystick rightward to view the device’s
port information; Move the joystick leftward to view the IP, CAM NUM information; ENTER to
delete the selected device.
Zowietek Universal IP PTZ Camera Controller User Manual
9
3.4 VISCA Mode Setting
Control settings (set the baud rate for a certain address):
Move the joystick up, down, left and right to switch addresses (1-7) → ENTER →Move the
joystick left and right to switch baud rate → ENTER
EX: Select the address: 1 → ENTER → Select the baud rate: 9600 → ENTER
When the controller switch to address 1, the control baud rate is 9600
3.5 PELCO Mode Setting
Control settings (set the baud rate for a certain address):
Move the joystick up, down, left and right to switch addresses (1-255) → ENTER →Move the
joystick left and right to choose protocols → ENTER →Move the joystick left and right to switch
baud rate → ENTER
EX: Select the address: 1 → ENTER → Select the protocol: PELCO-D → ENTER → Select the
baud rate: 9600 → ENTER
When the controller switch to address 1, the control baud rate is 9600, the protocol is PELCO-D
3.6 ONVIF Mode Setting
Delete saved device:
Move the joystick up and down to view devices; Move the joystick rightward to view the device’s
port information; Move the joystick leftward to view the IP, CAM NUM information; ENTER to
delete the selected device.
4. Connection and Control
4.1 Connection and Control in ONVIF Mode
Search and Add
In ONVIF mode, follow the steps below to add a LAN device to the PTZ controller:
(1) After the controller obtained the IP address, simply press the SEARCH button.
(2) All available devices with ONVIF protocol in the LAN will be displayed on the controller
when the search process is complete.
(3) Move the joystick up/down to select the device, press the ENTER button to confirm.
Zowietek Universal IP PTZ Camera Controller User Manual
10
(4) It’s required to enter the device’s username, password and CAM NUM information when
adding a device.
(5) Press the ENTER button to save.
(6) Alternatively to add a device via [IP] button manually.
(7) Press the INQUIRE button to view the added device; Move the joystick up/down to view the
saved device (move the joystick rightward to view the port); Press the ENTER button to
select a camera to control, or use the CAM button to connect and control.
4.2 Connection and Control in IP VISCA Mode
The Searching function is not available in IP VISCA mode, but to manually add a device.
(1). Manually add device via the [IP] button.
(2) Press the INQUIRE button to view the added device; Move the joystick up/down to view the
saved device (move the joystick rightward to view the port); Press the ENTER button to select a
camera to control, or use the CAM button to connect and control.
Note: In IP VISCA mode, the camera’s IP address must be at the same network
segment with the controllers IP address, and the camera’s Network Port (UDP
Port) should be set: 1259 or 52381.
4.3 Control in VISCA & PELCO Mode
Simply set the address and baud rate to control.
In PELCO Mode, correctly setting the PELCO-D or PELCO-P protocol is required.
Zowietek Universal IP PTZ Camera Controller User Manual
11
5. Web Page Configuration
5.1 Home Page
(1) Connect the controller and computer to the same LAN and enter the controllers IP address
into the browser.
(2) Default username: admin; Password: empty (leave the box blank)
Note: In ONVIF mode, the controller’s web settings as username and password must be
consistent with the camera WEB background settings, and the camera’s IP address must
be in the same network segment as the controller’s IP address.
(3) Home page is as below:
(4) Home page consists of three segments: Search Device List (green); Added Device List (blue)
or Manually Add (yellow); Device Details (orange).
(5) Click “Search” button to find ONVIF devices in the LAN, which will be displayed in the
green frame automatically.
(6) Select the device in the "Search Device List", and click "Add" to complete. Press "Ctrl" for
multiple selections.
(7) Select the device in the "Added Device List", and click "Delete" to complete. Press "Ctrl" for
multiple selections.
(8) After successfully add a device, click the IP address in the "Added Device List" to edit the
account and port information of the device.
(9) After addition, deletion, and modification, click "Save" button to take effect.
Zowietek Universal IP PTZ Camera Controller User Manual
12
PS. Any modification to the configuration on home page needs to be saved by click "Save" button;
otherwise the modification is invalid.
5.2 LAN Settings
To modify the device IP access way and port parameters in LAN Settings, as shown below:
Dynamic address (default access way): the Controller will automatically acquire the IP address
from the router. (DHCP)
Static address: Change the network to static address when necessary; simply input the network
segment information to modify.
5.3 Upgrade
The upgrade function is applied for maintenance and updates.
Choose the right upgrading file and click “start” to update the controller. It will auto reboot after
updating.
PS: Do not operate the controller during the upgrade process. Do not power off or disconnect the
network.
5.4 Restore Factory
Restore the controller to factory default settings when an unexpected failure occurs due to
Zowietek Universal IP PTZ Camera Controller User Manual
13
incorrect modifications. Please use it with caution if the controller works well.
5.5 Reboot
Click Reboot for maintenance if the controller runs for a long time.
Copyright Statement
All the contents in this manual and its copyright are owned by the company. No one is allowed to
imitate, copy, or translate this manual without the company’s permission. This manual contains no
guarantee, standpoint expression or other implies in any form. Product specification and
information in this manual are for reference only and subject to change without notice.
All rights reserved. No reproducing is allowed without acknowledgement.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

zowieTek 90950-220 User manual

Type
User manual

The zowieTek 90950-220 is a versatile PTZ camera controller that offers both IP and analog control options, making it compatible with a wide range of cameras. With four control modes (IP VISCA, ONVIF, RS422, and RS232) and three control protocols (VISCA, ONVIF, and PELCO), this controller provides flexible control options for various camera setups.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI