CTC Union ITP-800-8PHE24 Quick Installation Manual

Brand: CTC Union

Model: ITP-800-8PHE24

Category: Network switches

Type: Quick Installation Manual

This manual is also suitable for

ITP-800-8PH24

ITP-800-8PH24

ITP-800-8PHE24

IP56 EN50155 8 x 10/100Base-TX

with 8 x PoE+ Ethernet Switch (Hardened)

Quick Installation Guide

sales@ctcu.com

ITP-800-8PH(E)24 QIG

Version 1.3 (HWv1.1a) September, 2019

This QIG supports the following models:

- ITP-800-8PH24

- ITP-800-8PHE24

CTC Union Technologies Co.,Ltd.

Far Eastern Vienna Technology Center

(Neihu Technology Park)

8F, No. 60 Zhouzi St.,

Neihu, Taipei 114, Taiwan

T +886-2-26591021

F +886-2-26590237

E [email protected]om

H www.ctcu.com

2019 CTC Union Technologies Co., LTD.

All trademarks are the property of their respective owners.

Technical information in this document is subject to change without notice.

To download this QIG, please visit https://www.ctcu.com/en/download.html

Table of Contents

Introduction ................................................................................... 4

Package List .................................................................................. 4

Features ......................................................................................... 4

Specifications ................................................................................ 5

Panel .............................................................................................. 7

PIN Assignment............................................................................. 8

M12 Cable Connector Installation ................................................ 9

LED Indicators ............................................................................. 10

Earth Ground Connection .......................................................... 11

Wall-Mounting & Din-Rail Installation ....................................... 12

Application .................................................................................. 13

Introduction

ITP-800-8PH(E)24 devices, designed for industrial grade applications, are

unmanaged Fast Ethernet PoE+ switches. ITP-800-8PH(E)24 Ethernet switches

provide 8 x 10/100Base-TX Fast Ethernet PoE+ ports that utilize M12 connectors to

ensure tight and robust connections against environmental disturbances such as

vibration and shock. ITP-800-8PH(E)24 Series Ethernet switches also comply with

EN50155 standard that covers strict demands on operating temperature, power

input voltage, surge, ESD, vibration, and shock, thus making these switches

suitable for industrial applications such as vehicle, rolling stock and railway.

Package List

 One ITP-800-8PH(E)24 device with a wall-mounting bracket

 Protective caps for UTP ports

Features

 Use M12/M23 anti-vibration and anti-shock connector

 24/48VDC (20~57VDC) redundant dual input power

 Built-in very high efficiency (97%~98%) booster to provide PoE output voltage

at 50VDC

 Regulate PoE output voltage (50VDC) to stabilize PoE-supported end devices

up to a distance of 100 meters

 PoE output power budget 120W (Maximum)

 Wide temperature range -40°C~75°C (ITP-800-8PHE24)

 IP56 grade rugged housing against water

 CE, FCC, EN50155 and EN50121-4 certified

 Heavy Industrial grade EMS, EMI, EN61000-6-2, EN61000-6-4 certified

Specifications

Interface

 Connector Type: 8 x M12 D-Code Female

 Speed: 10/100Base-TX

 Support Auto Negotiation and Auto MDI/MDI-X

 Support 802.3x Flow Control

 Support Half/Full Duplex

 Store & Forward Data Processing

Switch

 MAC Address Table: 1K

 Packet Buffer Size: 448Kbits

 Switching Fabric: 1.6Gbps

Power over Ethernet

 8 x PoE enabled ports, M12 (4-Pin) D-Code Female

 Supports IEEE802.3af 15.4watts PoE per port

 Supports IEEE802.3at 30watts PoE+ per port

 Maximum power budget 120W (30W per port)

 Regulate PoE output voltage (50VDC) to stabilize PoE devices

 Deliver PoE power up to 100 meters

Power

 Connector Type: 1 x M23 (5-Pin) Male

 Power Supply: Redundant Dual DC 24/48V (20~57VDC) input power

 Support Power Input Reverse Polarity Protection

 Support Overload Current Protection

 Consumption:

Input

Voltage

Total Power

Consumption

Device Power

Consumption

PoE Budget

Boost

Efficiency

24VDC

125W

3.6W

120W

98%

48VDC

127W

4.3W

120W

97%

Mechanical

 Housing: IP56 Waterproof Protection

 Fanless Design

 Dimensions: 67 mm (D) x 71.4 mm (W) x 219.5 mm (H)

 Installation: Wall mounting & DIN-Rail (Optional accessory)

 Weight: 715g

Environmental

 Operating Temperature: -10°C~60°C (ITP-800-8PH24), -40°C~75°C (ITP-800-

8PHE24)

 Storage Temperature: -40°C~85°C

 Humidity: 5%~95% (Non-condensing)

Certifications

 EMC: CE (EN55024, EN55032)

 EMI (Electromagnetic Interference): FCC Part 15 Subpart B Class A, CE

 Railway Traffic: EN50155, EN50121-4

 Immunity for Heavy Industrial Environment: EN61000-6-2

 Emission for Heavy Industrial Environment: EN61000-6-4

 EMS (Electromagnetic Susceptibility) Protection Level:

 EN61000-4-2 (ESD) Level 3, Criteria B

 EN61000-4-3 (RS) Level 3, Criteria A

 EN61000-4-4 (Burst) Level 3, Criteria A

 EN61000-4-5 (Surge) Level 3, Criteria B

 EN61000-4-6 (CS) Level 3, Criteria A

 EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A

 EN61000-4-11 Voltage Dips

 Safety: UL60950-1 (Pending)

 Shock: IEC 61373

 Freefall: IEC 60068-2-32

 Vibration: IEC 61373

MTBF (MIL-HDBK-217)

 937,878 Hours

Panel

Index

No.

Description

Wall mounting holes

Grounding screw

M23 power input port

Power port label

Power LED

M12 Ethernet ports

Ethernet port LED

PoE LED

Ethernet port label

Figure 1: Front Panel

PIN Assignment

M12 Fast Ethernet Cable

M12 Pin No.

RJ-45 Pin No.

Ethernet Pinout

PoE Pinout

TD+

V-

RD+

V+

TD-

V-

RD-

V+

NOTE: ITP-800-8PH(E)24 is a PSE device that can connect to PDs (Powered

Devices) or non-PoE devices. However, it is NOT recommended to connect ITP-

800-8PH(E)24 to another PSE device. By doing so, it may have potential risks to

cause device damages.

M23 Power Input Cable

M23 Pin No.

Pinout

Description

Color of Open Cable

V1+

24/48VDC

Black

V1-

Blue

C-GND

Green

V2+

24/48VDC

Brown

V2-

White

Model: CAB-M12DM4-RJ45

Model: CAB-M23F5-Open

M12 Cable Connector Installation

Before assembling M12 open cable, make sure you have the following M12

cable connector components (Model: M12D-M4 M12 D-Code Male) and open

cable at hand.

Assembly Steps:

Step 1. Insert the screw nut, O-ring, and housing into the cable in the order shown

in Figure 2 and keep them loose in this step.

Step 2. Strip the cable and the individual cores to fit the connector. Insert the

stripped wires into the opened contact clamps.

Figure 2: Insert components into the cable

Figure 3: Insert the stripped wires to contact clamps

Screw Nut

Housing

Male Contact

Connector

O-Ring

Step 3. Tighten the connector in clockwise direction, making sure that

the wires inside the connector are not twisted as the screwed housing is

assembled.

LED Indicators

LED

Color

Status

Description

PWR1

Green

Lit if power 1 is connected and active.

Off

Power is not connected.

PWR2

Green

Lit if power 2 is connected and active.

Off

Power is not connected.

Link/

ACT

Green

Lit when the LAN connected speed is 10M or

100M.

Blinking

Blinking if there is Ethernet traffic.

Off

No Ethernet link.

PoE

Green

Lit when the respective LAN port has successfully

negotiated PoE and is supplying output power to

the remote connected PD device.

Figure 4: Tighten the connector

Earth Ground Connection

An earth grounding connection hole is provided in the upper right-hand corner

of the front panel (See Figure 1) with an earth ground sign next to it. Grounding

the device can help to release leakage of electricity to the earth safely so as to

reduce injuries from electromagnetic interference (EMI).

Prior to connecting to the power, it is important to connect the ground wire to

the earth. Follow steps below to install ground wire:

Step 1. Make sure you have the grounding screw and grounding cable at hand.

Step 2. Unfasten the ground screw on the front panel.

Step 3. Attach the grounding screw to the ring terminal of the grounding cable.

Make sure that the grounding cable is long enough to reach the earth.

Step 4. Use a screwdriver (or other tools) to fasten the grounding screw on the

earth ground hole securely.

Figure 5. Earth Grounding Connection

Ring-type

terminal

Fork-type

terminal

Wall-Mounting & Din-Rail Installation

The PoE+ Ethernet Switch can be mounted on the wall or installed in DIN rail.

The wall mount bracket has been attached to the device. Therefore, there is no

need to install wall mount bracket (Figure 6).

Figure 6. Wall Mounting

When installing the DIN rail bracket (optional accessory), be sure to correctly

align the orientation pin (Figure 7). The DIN Rail bracket has a steel spring in the

upper rail of the bracket. This spring is compressed for mounting and un-mounting

by applying downward force.

Figure 7. Din Rail Figure 8. Mounting Figure 9. Un-mounting

Application

Figure 10. EN50155 PoE Switch in Smart Bus Application Diagram

NOTE: ITP-800-8PH(E)24 is a PSE device that can connect to PDs (Powered

Devices) or non-PoE devices. However, it is NOT recommended to connect ITP-

800-8PH(E)24 to another PSE device. By doing so, it may have potential risks to

cause device damages.

Version

Date

Description

v1.3

2019/9/26

Single-page format

Revise PoE budget (180W to 150W to

120W)

Regulate PoE output voltage (50VDC)

Revise power consumption

Add a note in page 8 & 13

CTC Union ITP-800-8PHE24 Quick Installation Manual

Brand: CTC Union

Model: ITP-800-8PHE24

Category: Network switches

Type: Quick Installation Manual

This manual is also suitable for

ITP-800-8PH24

Download PDF

report

CTC Union ITP-800-8PHE24 Quick Installation Manual

This manual is also suitable for

CTC Union ITP-800-8PHE24 Quick Installation Manual

Related papers

Other documents