Vivo MOUNT-PLAY3B Assembly Instructions

Category
Speaker mounts
Type
Assembly Instructions
Black Dual Wall Mount Designed for Sonos Play 3
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-play3b
SKU: MOUNT-PLAY3B
Instruction Manual
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
ASSEMBLY STEPS
STEP 1
Use screwdriver to release the latch and
separate the wall mount (A) from the
support bracket.
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
PACKAGE CONTENTS
A (x2)
Mount
B (x2)
Bolt
W-A (x6)
Screw
W-B (x6)
Anchor
C (x4)
Push
D (x4)
PIn
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
com, email at [email protected], or call us at 309-278-5303.
A
TOOLS NEEDED
Phillips
Screwdriver
Drill Pencil
3
STEP 2
Using the wall mount (A) as a template, mark drilling locations on wall with a pencil. Use of a level is
recommended.
OPTION A: Wood Wall Installation
For wood stud installation, drill 2” (50mm) deep holes using a 3/32” (2.5mm) drill bit and secure wall
mount (A) using screws (W-A).
W-A
W-B
OPTION B: Concrete/Brick Wall Installation
For concrete/brick installation, drill 2.2”
(55mm) deep holes using a 5/16” (8mm) drill
bit and secure wall mount (A) using screws
(W-A) and anchors (W-B).
STEP 3
Attach support bracket to Sonos PLAY 3 speaker
using bolt (B) and push pin system (C + D).
D
C
B
STEP 4
Slide the support bracket with speaker onto
the wall mount (A) until it clicks into place.
1
2
STEP 5
Adjust tilt and swivel as desired.
±45°
-18°
STEP 6
Adjust rotation as desired.
±180°
LAST UPDATED: 03/05/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Vivo MOUNT-PLAY3B Assembly Instructions

Category
Speaker mounts
Type
Assembly Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI