2. Everbilt
  3. 78398

Everbilt 78398 Installation guide

  • Hello! I've reviewed the installation instructions for various types of handles as found in this document, including single handles with set screws and buttons, as well as handles without buttons. The document details the necessary tools and the step-by-step process for removing old handles and installing replacements. Feel free to ask me any questions you might have about the procedures outlined within this guide.
  • What tools are required for handle installation?
    What are the different handle types covered in this guide?
    What should I do if the handle is difficult to remove?
Handle
ButtonScrew
Single Handle with Set Screw
Installation Instructions:
1. Remove handle red & blue hole button, if present.
2. Use allen wrench to loosen the handle set screw.
3. Remove the old handle. Pry with screwdriver from both sides,
to rock on and off, if needed. Use handle puller if needed.
4. Replace handle and secure with set screw. Insert red & blue
hole button if present.
HANDLE
INSTALLATION INSTRUCTIONS 1006965170
Tools Required:
Screwdriver
Allen Wrench
Optional:
Handle Puller
Handles without Buttons
Installation Instructions:
1. Remove the handle screw.
2. Remove the old handle. Pry with screwdriver from both sides,
to rock on and off, if needed. Use handle puller if needed.
3. Replace handle and screw.
Single Handle with Button
Installation Instructions:
1. Remove the handle button and screw.
2. Remove the old handle. Pry with screwdriver from both sides, to rock on and off, if needed. Use handle puller if needed.
3. Replace handle and screw, then replace the button.
Set Screw
Handle
Hole Button
Handle Screw
Note: All images are for illustration purposes only.
Actual product and faucet components may vary.
/