2. Everbilt
  3. 89811

Everbilt 89811 Installation guide

  • Hello! I've reviewed the Handle Installation Instructions document, which details the steps for installing various types of handles. There are instructions for single handles with set screws, with buttons, and without buttons. I'm ready to answer your questions about the installation process or the required tools. Let me know how I can help!
  • What tools are needed for handle installation?
    What is an optional tool that can be used?
    What is the first step for installing a single handle with a set screw?
    What is the first step for installing a single handle with a button?
    What is the first step for installing a handle without buttons?
Handle
ButtonScrew
Single Handle with Set Screw
Installation Instructions:
1. Remove handle red & blue hole button, if present.
2. Use allen wrench to loosen the handle set screw.
3. Remove the old handle. Pry with screwdriver from both sides,
to rock on and off, if needed. Use handle puller if needed.
4. Replace handle and secure with set screw. Insert red & blue
hole button if present.
HANDLE
INSTALLATION INSTRUCTIONS 1006964476
Tools Required:
Screwdriver
Allen Wrench
Optional:
Handle Puller
Handles without Buttons
Installation Instructions:
1. Remove the handle screw.
2. Remove the old handle. Pry with screwdriver from both sides,
to rock on and off, if needed. Use handle puller if needed.
3. Replace handle and screw.
Single Handle with Button
Installation Instructions:
1. Remove the handle button and screw.
2. Remove the old handle. Pry with screwdriver from both sides, to rock on and off, if needed. Use handle puller if needed.
3. Replace handle and screw, then replace the button.
Set Screw
Handle
Hole Button
Handle Screw
/