Highwood AD-KITCLAS2-ACE Operating instructions

Type
Operating instructions

This manual is also suitable for

For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 1 OF 1
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
high
wood
NATURE'S CLOSEST RIVAL
Adirondack Collection
Classic Westport Adirondack Chair
Assembly Guide
1) With the Back and Seat on their sides, attach one
side of the Back to the Seat using two A bolts.
2) Repeat on other side.
AD-CLAS1
07.15.2016
A
3) With the chair still on its side,
attach the Back to the Arm,
using one A bolt.
4) Attach the Seat to the Leg using two A bolts.
5) Flip chair onto its other side and repeat
Steps 3 & 4. Enjoy your Highwood Chair!
x10
1/4"-20 x 1-3/4"
A
SEAT
BACK
ARM
LEG
BACK
SEAT
A
A
  • Page 1 1

Highwood AD-KITCLAS2-ACE Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI