Highwood AD-KITADRI1-WAE Operating instructions

Type
Operating instructions
A
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
T-15 TORX BIT
high
wood
NATURE'S CLOSEST RIVAL
CUSTOMER-SUPPLIED TOOLS
Cordless screwdriver/drill OR
Multi-bit handle for the Torx bit.
Adirondack Collection
Manhatten Adirondack Chair
Assembly Guide
1) Attach Seat to Back using bolt C.
2) Repeat on other side.
ADRID129A/B
07.05.2017
3) Attach Back Support Brace (shorter piece)
to Back Support Sides with four A screws.
1/4"-20 x 3"
C
B
A
#7 x 1-5/8"
x8
1/4"-20 x 2"
x2
x4
C
A
BACK
SEAT
A
B
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 2 OF 2
high
wood
NATURE'S CLOSEST RIVAL
Adirondack Collection
Manhatten Adirondack Chair
Assembly Guide
ADRID129A/B
07.05.2017
IMPORTANT NOTE!
NEVER adjust the level of recline while you are sitting in the chair, or while
anyone else is in the chair. Always adjust with an empty chair and ensure that the
back-support is completely secure in the recline slots on each side of the chair.
To fold the chair, lift the back-support and gently push down on the back of
the chair. The chair will collapse down to floor level.
SEAT
Board Faces Out
(From Step 3)
BACK
ARM
C
4) Insert bolt C from the Arm, through the
Back Support Side, and into the Back.
5) Repeat on other side.
LEG
B
Washer between
Leg and Seat
SEAT
8) Attach Front Leg Support with four
A screws. Enjoy your Highwood Chair!
6) Turn chair over. Towards front of
Seat, attach Seat to Leg using bolt B.
7) Repeat on other side.
A
  • Page 1 1
  • Page 2 2

Highwood AD-KITADRI1-WAE Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI