2. Highwood
  3. The Essential Rocking Chair

Highwood The Essential Rocking Chair Assembly Instructions

  • Hello! I've reviewed the assembly guide for the Mountain Bluff Collection EO-ROCCW2 Rocking Chair. It appears to provide detailed steps for assembling the chair using provided hardware and tools. I'm ready to answer your questions about the assembly process or any other related topics!
  • What should I do before fully tightening the bolts?
    What tool is included for assembly?
    Where can I find more information about care and registration?
For information on Care and Cleaning or to
Register your ELK OUTDOORS by highwood
product, please visit www.highwood-usa.com. PAGE 1 OF 2
TOOLS INCLUDED
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all bolts are started.
Once all bolts are inserted, go back & tighten all the bolts.
Mountain Bluff Collection
Essential Rocking Chair
Assembly Guide
HARDWARE INCLUDED
EO-ROCCW2
4/23/21
by highwood
ELK OUTDOORS
AQty: # 10
1/4"-20 x 1.75"
1) With the Back and Seat on their sides, attach
one side of the Back to the Seat using two A bolts.
2) Repeat on other side.
BACK
SEAT
A
B
1/4"-20 x 2"
Qty: # 6
For information on Care and Cleaning or to
Register your ELK OUTDOORS by highwood
product, please visit www.highwood-usa.com. PAGE 2 OF 2
EO-ROCCW2
4/23/21
by highwood
ELK OUTDOORS
3) Attach front of Leg Assembly to Seat using
two A bolts. Attach back of Leg Assembly to
Seat using two B bolts.
4) Repeat on other side.
SEAT BACK
B
LEG ASSEMBLY
A
INSERTS FACING
TOWARD SEAT
3) Attach Arm Assembly to Leg using one B bolt.
Attach Arm Assembly to Back using one A bolt.
4) Repeat on other side. ARM
A
BACK
LEG ASSEMBLY
B
/