Highwood Classic Westport Adirondack Rocking Chair Assembly Instructions

Highwood
Brand
Highwood
Model
Classic Westport Adirondack Rocking Chair
Type
Assembly Instructions
1
For information on Care and Cleaning or to register your
highwood® product, please visit www.highwood-usa.com. PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
highwood
NATURE'S CLOSEST RIVAL
®
Adirondack Collection
Classic Westport Rocking Chair
Assembly Guide
1) With the Back and Seat on Their
Sides, Attach One Side of the Back
to the Seat Using Two "A" Bolts.
2) Repeat on Other Side.
ROCCW30
03.17.2017
Ax 10
1/4"-20 X 1-3/4"
B
1/4"-20 X 2"
x 6
A
SEAT
BACK
For information on Care and Cleaning or to register your
highwood® product, please visit www.highwood-usa.com. PAGE 2 OF 2
highwood
NATURE'S CLOSEST RIVAL
®
Adirondack Collection
Classic Westport Rocking Chair
Assembly Guide
ROCCW30
03.17.2017
B
A
A
LEG ASSEMBLY
ARM ASSEMBLY
LEG ASSEMBLY
BACK
SEAT
INSERTS FACING TOWARD
SEAT AS SHOWN
3) Attach Front of Leg Assembly to Seat
Using Two "A" Bolts as Shown Above.
Attach Back of Leg Assembly to Seat Using
Two "B" Bolts as Shown Below.
4)Repeat on Other Side.
5) Attach Arm Assembly to Leg Using One
"B" Bolt. Attach Arm Assembly to Back
Using One "A" Bolt.
6) Repeat on Other Side.
BACK
B
BACK
SEAT
LEG ASSEMBLY
  • Page 1 1
  • Page 2 2

Highwood Classic Westport Adirondack Rocking Chair Assembly Instructions

Highwood
Brand
Highwood
Model
Classic Westport Adirondack Rocking Chair
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers