Electrolux 727084 (RCDR4M33U) Datasheet

Electrolux
Brand
Electrolux
Model
727084 (RCDR4M33U)
Type
Datasheet
Identification:
Technical
Bulletin no:
Date:
Issuer:
Factory:
D02-D03-D04-D05-D06
CGX2006-01 (page 1 of 4), 3rd ed.
24 July 20006
R. Sartor (DWS Customer Support)
DW Vallenoncello - Italy
Subject
Rinse Pump in UC, UW, HT, PW and Old RT
Model
Undercounter LS6E / WT30E with atmospheric boiler,
Utensils Washer LU7 / WTU40 with atmospheric boiler,
Hood Type LS9 / WT55 with atmospheric boiler,
Hood Type LS10EA-14EA / WT65E
Pot&Pan Washer PW1M-2M / WT830M-850M / WT830EA-850EA
Rack Type RT140-190-270 Eco and Ecoplus (with Duo Rinse)
Rack type WT100-140-150-190-200-270 Basic, Eco and Ecoplus (with Duo Rinse)
Problem
Sometime water leakage overnight.
Some pumps leak from shaft sealing and some worked without water (burning the sealing)
Action in
Factory
From serial number 60800001 we have introduced new rinse pumps FIR5213
with grey thermosetting (BCM) shell and cross through screws with self-
locking nut instead of 049310 (and relevant pumps FIR4213 with different
voltage supply) with white thermoplastic shell and self-tapping screws.
Thermosetting material is more chemicals and high temperature proof than
thermoplastic material.
ELECTROLUX PROFESSIONAL SPA
MAILING ADDRESS TELEPHONE WEBSITE VAT NO.
VIA SEGALUZZA, 30
33170 PORDENONE - ITALY
++39 0434 380650 www.electrolux.com 00072220932
OLD
OLD
OLD
(049310)
OFFICE ADDRESS TELEFAX E-MAIL ADDRESS
VIA SEGALUZZA, 30
33170 PORDENONE - ITALY
++39 0434 380643
++39 0434 385646
[email protected]
old code
(FIR 4213)
new rinse
pump
prod. code
(see rating plate)
new
code
(FIR 5213)
characteristics
Voltage
supply
[V]
Frequency
[Hz]
Power
[kW]
Capacitor
[µF]
NEW
NEW
NEW
Rpm
611631300
0L1079
Short
rotor/stator
NOT for RT
0.23 5
049310
611632400
0L1104
Long rotor/stator
90° outlet
For Rack Type
220/240 50
0.28 6.3
2800
611631500
0L1100
Short
rotor/stator
NOT for RT
0.23 5
049612
611632500
0L1111
Long rotor/stator
90° outlet
For Rack Type
220/240 60
0.28 6.3
3400
611631800
0L1103
Long rotor/stator 6.3
049812
611632600
0L1112
Long rotor/stator
90° outlet
For Rack Type
400 50 0.28
6.3
2800
611631900
0L1101
Long rotor/stator 6.3
049813
611632800
0L1109
Long rotor/stator
90° outlet
For Rack Type
440 60 0.28
6.3
3400
611631600
0L1099
Long rotor/stator 6.3
0L0020
611633000
0L1110
Long rotor/stator
90° outlet
For Rack Type
200 60 0.28
6.3
3400
n.a.
611632900
0L1114
Long rotor/stator
90° outlet
For Rack Type
440 50 0.28 6.3 2800
n.a.
611632700
0L1113
Long rotor/stator
90° outlet
For Rack Type
400 60 0.28 6.3 3400
049965
611631700
0L1102
Long rotor/stator 200 50 0.28 6.3 2800
0L0421
611632000
0L1098
Long rotor/stator 208/240 60 0.28 6.3 3400
2
Pumps with long rotor/stator are suitable for non-stop service (Rack Type) while pumps
with short rotor/stator are suitable for intermittent service only.
T
T
h
h
e
e
r
r
e
e
f
f
o
o
r
r
e
e
do
NOT
use
pumps
0L1079
do NOT use pumps 0L1079
and
0L1100
in
any
Rack
Type
and 0L1100 in any Rack Type
.
They are suitable for Undercounter, Frontal Loading, Hood Type and Pot&Pan Washer machines.
Pumps 0L1104 / 0L1111 should NOT be used instead of 0L1079 / 0L1100
turning the shell 90° because the sealing is NOT longer guaranteed.
0L1104 / 0L1111 0L1079 / 0L1100
3
Action in
Field
New pumps are not perfectly interchangeable towards the previous ones:
• long rotor/stator pumps are a bit bigger than old pumps while short
rotor/stator pumps are smaller than old pumps;
• the inlet is now 2 mm larger (so new inlet hoses are needed
accordingly);
• the capacitor is fitted on board.
New pumps can be fitted in older machines only with following parts:
Product Family
Screw M6x20
(2 pcs)
Pump holder
(1 pc)
Inlet hose
(1 pc)
LS5WS / WT4WS
Still need 049310 (recoded as 0L1030) and 049612
since there is not enough space for the new ones
LS6EA / WT30E
LU7 / WTU40
LS9 / WT55
LS10EA-14EA / WT65E
0L1118 (“L” shape) 0L1108
PW1M-2M / WT830M-850M
WT830EA-850EA
0G1698
x 2
not needed not needed
RT140-190-270
Eco and Ecoplus versions
(with duo rinse)
WT100-140-150-190-200-270
Basic, Eco and Ecoplus versions
(with duo rinse)
not needed
The old pump holder 0L0144
(“U” shape) can be used
adding 2 holes
not needed
Orders for old 049310 / 049612 / etc. will be switched automatically to new
0L1079 / 0L1100 / etc. since these new short rotor/stator pumps are used in
more machines.
Please, be aware that water leakage may happen again if the rinse
pump has worked without water (burning the shaft sealing).
4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Electrolux 727084 (RCDR4M33U) Datasheet

Electrolux
Brand
Electrolux
Model
727084 (RCDR4M33U)
Type
Datasheet
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents