2. JasonL
  3. SFCR212PT

JasonL SFCR212PT, SFWR212PT Operating instructions

  • Hello! I've reviewed the installation guide for the San Fran 2 Person Run workstation. I see it includes instructions on how to assemble the workstation, covering everything from connecting the legs to the rails to attaching the table tops. The guide also mentions the tools required and special notes for installation. I'm ready to answer any questions you have about assembling this workstation.
  • What tools are required for assembly?
    What should I do about pre-drilled holes in the top?
    What size are the table tops?
Special Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s).
They will not match your particular table/desk base and woods screws will be required to be screwed
directly into the underside of the top.
Tools Required: Power screwdriver.
INSTALLATION GUIDE
San Fran 2 Person
Run Workstation
Size: 1200x800 mm
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
1
8
5
7
4
2
3
9
10
6
11
12
INSTALLATION GUIDE
San Fran 2 Person
Run Workstation
Size: 1200x800 mm
Page 2 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Table Top (1200x800) x2
Leg x6
Adjustable Foot x6
Leg Cable Cover x6
San Fran Beam 920mm x4
San Fran Beam 120mm x3
T connectors x2
T connectors Cap x2
90 Degree connectors x4
90 Degree connectors Cap x4
1
2
3
4
5
6
7
8
9
10
M8x12mm Dome Head x14
M8x20mm Cap Head x6
M5x20mm Self Tapping x12
11
12
13
COMPONENTS
SCREWS
INSTALLATION GUIDE
San Fran 2 Person
Run Workstation
Size: 1200x800 mm
01 02
03
Slide the 2 way and 3 way connectors over each leg, and securely
lock into place using M8x20mm cap head screws (12).
Securely connect legs to rails lenghts using M8x12mm dome head screws (11).
Securely connect legs to rails widths using M8x12mm dome head screws (11). Ensure the worksurface is centered over the frame.
Page 3 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
04
Drill all M5x20mm self tapping screws (13)
through each leg into the worksurface. Loosely connect the shorter M8x12mm dome head bolt and slot nut through the
metal rail spacer bracket. Slide onto required rails and fully tighten in place.
INSTALLATION GUIDE
San Fran 2 Person
Run Workstation
Size: 1200x800 mm
Page 4 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
05 Optional
/