P/N 44632
User Manual
Dark Matter™ by Monoprice™
27in IPS QHD 2560x1440p 2ms 165Hz Monitor
Preface
................................................................................................................................................................................................................
3
SAFETY NOTICE
...........................................................................................................................................................................................
3
MAINTENANCE AND CLEANING
.................................................................................................................................................
4
SPECIAL NOTES ON LCD MONITORS
.......................................................................................................................................
5
PRODUCT INTRODUCTION
.................................................................................................................................................................
7
PACKING LIST
................................................................................................................................................................................................
7
Stand Assembly and Disassembly Instructions
.............................................................................................................
8
INSTALLATION INSTRUCTIONS
.....................................................................................................................................................
9
FUNCTIONAL OPERATION SPECIFICATION
......................................................................................................................
10
TROUBLESHOOTING
.............................................................................................................................................................................
12
TECHNICAL SPECIFICATIONS
.......................................................................................................................................................
14
Preface
Every e!ort has been made to ensure that the information in this document is accurate.
However, the manufacturer and Monoprice of this product assume no responsibility for
any error, omission in this document, or use of the information contained herein.
Please preserve this manual for the life of the equipment.
Congratulations on your purchase.
SAFETY NOTICE
PRECAUTIONS
•
Please read all the instructions carefully before using this product.
•
To reduce any fire or electrical risk, do not spill any liquids into the cabinet or use
your monitor near water.
•
DO NOT REMOVE THE MONITOR'S BACK COVER. There are no user serviceable parts
inside and opening or removing covers may expose you to dangerous shock hazards
or other risks.
•
Do not place this product on a sloping or unstable cart, stand, or table, as it may fall,
causing serious damage to the monitor. Do not put anything on top of the monitor.
•
If the power supply is lost, do not try to repair it. Please contact Monoprice.
•
Before use, make sure all the cables are well plugged and not damaged. In case of
any damage, please contact Monoprice Technical Support.
•
Only the type of power source indicated on the nameplate applies to this display. If
you have any questions about the type of power source you use, please consult the
dealer of the display.
•
Use an appropriate outlet, complying with the local electrical norms.
•
Do not place any heavy objects on the power cord. Damage to the cord may cause
shock or fire.
•
Do not use the monitor in high-temperature, humid, dusty, or oily areas.
•
In case of a storm or prolonged non-use, unplug the screen to protect against any
overvoltage damage.
•
When disconnecting the power cord of the display or power adapter, always
remember to hold the plug instead of pulling the wire to unplug the power cord.
•
Do not insert objects of any kind into the cabinet slots, as they may touch dangerous
voltage points, which can be harmful or fatal or may cause electric shock, fire, or
equipment failure.
•
Use a power cord that matches the AC voltage of the power outlet (100 ~ 240 V AC),
that has been approved, and that complies with the safety standard of your country.
•
The power cable connector is the primary means of detaching the system from the
power supply. The monitor should be installed close to a power outlet, which is easily
accessible.
•
Any technical issues, please contact Monoprice Technical Support.
CAUTION
: DO NOT REMOVE THE MONITOR BACK COVER. Opening or removing the
cover may expose you to dangerous voltages and other hazards.
There are no user serviceable parts inside and opening or removing covers may
expose you to dangerous shock hazards or other risks. Refer all servicing to
qualified service personnel.
MAINTENANCE AND CLEANING
•
For safety reasons, turn o! and unplug the display before cleaning.
•
Clean the panel surface with a lint-free, non-abrasive cloth. Treat stubborn stains
with a wet cloth and a gentle specific solution.
•
Avoid using cleaning products containing alcohol or acetone. Use a cleaning solution
specifically made for cleaning LCD screens. Never spray any liquid directly on the
screen. It could fall into the display and cause an electrical shock.
•
When cleaning, ensure that any liquid enters the display housing. Please make sure
only soft cloths are used for cleaning purposes. A hard cloth could damage the panel.
•
Clean the housing with a slightly humidified cloth and a gentle detergent, then wipe
it with a dry and clean cloth.
•
Do not insert anything in the unit, and never spill liquid of any kind on it.
SPECIAL NOTES ON LCD MONITORS
•
The following symptoms are normal with an LCD monitor and do not indicate a
problem.
•
Due to the nature of the fluorescent light, the screen may flicker during initial use.
Turn o! the Power Switch and then turn it on again to make sure the flicker
disappears.
•
You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.
•
The LCD screen has e!ective pixels of 99.99% or more. It may include blemishes of
0.01% or less such as a missing pixel or a pixel lit all the time.
•
Due to the nature of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for hours. In this
case, the screen is recovered slowly by changing the image or turning o! the Power
Switch for hours.
•
If the screen suddenly flashes erratically or the backlighting fails, please contact your
dealer or service center for repair. Do not attempt to repair the monitor yourself.
PRODUCT INTRODUCTION
CHARACTERISTIC
•
Adjust OSD in multiple languages.
•
Compatible with IBM VGA, Extended VGA, VESA VGA, SVGA, XGA, and SXGA Modes.
•
Wide voltage range, AC 100-240V 50/60Hz.
•
Plug and Play VESA DDC1/2B standard, compatible with Microsoft Windows
operating system.
•
Support the DDC/CI function.
PACKING LIST
Make sure your monitor package includes the following equipment:
•
Monitor (and Stand with Base)
•
Power Cord
•
Display Cable
•
User Manual
If anything is missing, please contact Monoprice Technical Support and Customer Service.
Stand Assembly and Disassembly Instructions
INSTALLATION INSTRUCTIONS
CONNECTED DISPLAY
1.
Shut down the computer and disconnect the power cable.
2.
Connect the display cable to the display connector of the computer. Connect the
other end of the display cable to the rear of the monitor.
3.
Connect the power cable to the AC power input terminal on the rear of the
monitor and plug the other end of the power cable into the nearest power socket.
4.
Turn on the power switch of the computer and the monitor. If there is an image on
the monitor, then it has been connected successfully.
Note: If power and display cables are damaged, they must be replaced immediately.
Please contact Monoprice Technical Support.
DISPLAY INTERFACE
FUNCTIONAL OPERATION SPECIFICATION
OSD OPERATION DESCRIPTION
The main menu provides controllable selection items. To adjust the screen image, tap the
navigation key and enter the menu for function adjustment according to the icon.
View Mode: Displays a quick menu that allows for selection of one of nine
video equalization presets (Standard, Game, Movie, Web, Text, MAC and
Mono).
Input Select: Displays a quick menu that allows for selection of one of three
video inputs.
Menu: Displays the full OSD menu.
Exit: Turns o! the on-screen button labels.
Once inside one of the above three menus, the button labels will change to indicate their
functions in operating the menus. The following are the various labels and their purpose.
Select: Enters the highlighted submenu or edits the selected menu entry.
Exit: Closes the OSD menu.
Back: Goes back to the previous menu or exits editing an entry.
Up: Moves the highlight up.
Down: Moves the highlight down.
Left/Decrease: Moves the highlight to the left or decreases the displayed
value when editing an entry.
Right/increase: Moves the highlight to the right or increases the displayed
value when editing an entry.
TROUBLESHOOTING
In view of the problems that often occur in the installation of users, we propose some
solutions, as described below. If you still can't solve your problem, please contact
Monoprice Technical Support for help.
NO SCREEN
•
Check whether the display cable between the monitor and the computer is properly
connected.
•
Adjust brightness and contrast control.
•
Check whether the monitor is in power-saving state.
•
Check whether the power cable is properly connected.
•
Check whether the monitor Settings of the operating system are in the display mode.
COLOR DISTORTION OR ABSENCE
•
Check whether the display cable of the monitor is properly connected.
•
Use the color option in the main menu to adjust the color.
THE IMAGE IS TOO BRIGHT OR TOO DARK
•
Adjust the brightness and contrast in the main menu.
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering,
purchasing, and delivery experience is second to note. If you have any problems with
your order, please give us an opportunity to make it right. You can contact a Monoprice
Customer Service representative through the Live Chat link on our website
www.monoprice.com or via email at [email protected]. Check the website for
support times and links.
TECHNICAL SUPPORT
Monoprice™ is pleased to provide free, live, online technical support to assist you with
any questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come
online to talk to one of our friendly and knowledgeable Tech Support Associates.
Technical support is available through the online chat button on our website
www.monoprice.com or through email by sending a message to tech@monoprice.com.
Check the website for support times and links. To download the latest drivers, firmware,
manuals, etc., go to www.monoprice.com and type 44632 into the search bar. If
available, support files are linked at the bottom of the product page.
The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.
TECHNICAL SPECIFICATIONS
P/N
44632
LED Panel
Display Size
27" Diagonal White LED-Backlight
Resolution
2560x1440@165Hz
Aspect Ratio
16:9
Pixel Pitch
0.2331*0.2331mm
V Frequency
50~165Hz
Display Colors
1.07 Billion
Brightness
300cd/m2 (Typical)
Contrast Ratio
1000:1 (Typical)
Response Time
2ms (with OD)
Viewing Angle(H/V)
H/V 178°/178°
Interface
HDMI（2.0）
Yes, x2
DP（1.4）
Yes, x1
Audio out
Yes, x1
Output
Speaker
Yes
Power
Type
AC 100-240V, 50-60Hz (Internal Power Supply)
Consumption
On: 40W
Standby<=0.5W, O!<=0.3W
Standby
<0.5W (O! mode<=0.3W)
Special Feature
VESA
100*100mm
Stand and neck
Fixed stand (Metal)
Tilt
Yes, -5°-20°
Flicker Free
Yes
Low Blue Ray
Yes
Need Help? We’re here for you!
Contact us: www.monoprice.com/contactus
Product pictures are for reference only.
Specifications described herein are subject to change without prior notification.
Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.
Copyright © 2023 Monoprice, Inc. All rights reserved.
www.monoprice.com
Monoprice, Inc.
1 Pointe Drive, Suite 400
Brea, CA 92821 – USA
www.
monoprice.
com
/
