Bitspower BP-VGSLI1S4P Installation guide

Type
Installation guide

This manual is also suitable for

Bitspower BP-VGSLI1S4P is a VGA Multi-Link Bridge that allows you to connect multiple graphics cards in SLI or CrossFireX configurations. It supports 2/3/4/6/7 slots applications and comes with all the necessary mounting hardware. The BP-VGSLI1S4P is made from high-quality materials and is designed to provide excellent performance and reliability. With its sleek black finish, the BP-VGSLI1S4P will also look great in any gaming rig.

Here are some of the features of the Bitspower BP-VGSLI1S4P:

  • Supports 2/3/4/6/7 slots applications
  • High-quality materials for excellent performance and reliability

Bitspower BP-VGSLI1S4P is a VGA Multi-Link Bridge that allows you to connect multiple graphics cards in SLI or CrossFireX configurations. It supports 2/3/4/6/7 slots applications and comes with all the necessary mounting hardware. The BP-VGSLI1S4P is made from high-quality materials and is designed to provide excellent performance and reliability. With its sleek black finish, the BP-VGSLI1S4P will also look great in any gaming rig.

Here are some of the features of the Bitspower BP-VGSLI1S4P:

  • Supports 2/3/4/6/7 slots applications
  • High-quality materials for excellent performance and reliability
安裝方式/Installation/安装方式
以兩孔為例(其他孔位以此類推) / Take BP-VGSLI1S2P For Example / 以两孔为例(其他孔位以此类推)
V1/第一版
注意,跑水前,請先確認所有零件已安裝在正確的位置上,在不開主機,單開水泵的情况下,進行24小時的跑水測試, 確保無漏水情况後再開主機,避免發生漏水而導致電腦零件的損壞。
注意,跑水前,请先确认所有零件已安装在正确的位置上,在不开主机,单开水泵的情况下,进行24小时的跑水测试, 确保无漏水情况后再开主机,避免发生漏水而导致电脑零件的损坏。
Before fill in water,please make sure all the component be installed correctly,avoidingleaking happen and destroy the PC component.
VGA Multi-Link Bridge For 2/3/4/6/7 Slots Application
拆卸原水冷頭上LINK。
Remove the original LINK from the water block.
拆卸原水冷头上LINK。
步驟一 / Step 1 /步骤一
安裝BP-VGSLI1S2P。
Install BP-VGSLI1S2P.
安装BP-VGSLI1S2P。
步驟三 / Step 3 /步骤三
步驟二 / Step 2 /步骤二
Fix the wrench on one side, and the other wrench
on the other side should be used in locking the
stopcock in the water channel.
在一側固定扳手,另一側用另一個扳手將塞頭旋轉固定在水道中。
在一侧固定扳手,另一侧用另一个扳手将塞头旋转固定在水道中。
塞頭/Stopcock/塞头
塞頭需轉入至兩側藍色區域看不見
The Stopcock should be in the red area, could not be
seen from the blue circle place.
塞头需转入至两侧蓝色区域看不见
BP-VGSLI1S2P
M4x32螺絲/M4x32Screws/M4x32螺丝
O圈/O-Rings/O圈
BP-VGSLI1S2P
範例/ /范例
液體/ /液体
/塞头
塞頭/
V1/第一版
本公司保留對產品的設計更改以及解釋的權力,如有更動恕不另行通知,產品顏色與配件以實物為準。
本公司保留对产品的设计更改以及解释的权力,如有更动恕不另行通知,产品颜色与配件以实物为准。
Bitspower reserves the right to change the product design and interpretations. These are subject to change without notice. Product colors and accessories are based on the actual product.
2 Slots Application 3 Slots Application 4 Slots Application
1
6 Slots Application
1
7 Slots Application
1
2
1
2
2 2
1
2
接頭/ /接头
塞頭不能安裝於此
塞头不能安装于此
Stopcock can’t install here
×
  • Page 1 1
  • Page 2 2

Bitspower BP-VGSLI1S4P Installation guide

Type
Installation guide
This manual is also suitable for

Bitspower BP-VGSLI1S4P is a VGA Multi-Link Bridge that allows you to connect multiple graphics cards in SLI or CrossFireX configurations. It supports 2/3/4/6/7 slots applications and comes with all the necessary mounting hardware. The BP-VGSLI1S4P is made from high-quality materials and is designed to provide excellent performance and reliability. With its sleek black finish, the BP-VGSLI1S4P will also look great in any gaming rig.

Here are some of the features of the Bitspower BP-VGSLI1S4P:

  • Supports 2/3/4/6/7 slots applications
  • High-quality materials for excellent performance and reliability

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI