2. Verkada
  3. ACC-INT-HOOD

Verkada ACC-INT-HOOD Installation guide

  • Hello, I've reviewed the Install Guide for the Verkada ACC-INT-HOOD Video Intercom Visor and the TD52 Video Intercom. This document covers the mounting process for the visor, ensuring proper placement using the video feed and a T10 screwdriver. I am ready to answer any questions you might have about the product or the installation process.
  • What devices are compatible with the ACC-INT-HOOD visor?
    What tool is needed to mount the visor?
    How should the visor be positioned?
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
[email protected]
All specifications are subject to change without notice
© Copyright 2023 Verkada Inc. All rights reserved.
1
ACC-INT-HOOD Video Intercom Visor
What you’ll need
●TD52 Video Intercom
●A T10 Torx Screwdriver
Compatible Products
●TD52 Video Intercom
Support
Thank you for purchasing this Verkada
product. If for any reason you're
experiencing issues or need assistance,
please contact our 24/7 Technical
Support Team immediately.
Sincerely,
The Verkada Team
verkada.com/support
Mounting
●Fit the visor over your assembled TD52 device.
●Use the video feed in Command to ensure it is placed out of the field of view, but overhanging
the camera as much as possible.
●Once positioned correctly, use the T10 screwdriver (included with TD52) to tighten the lock screw.
Install Guide
/