2. Verkada
  3. Video Intercom Angle Mount

Verkada Video Intercom Angle Mount Installation guide

  • Hello! I've reviewed the install guide for the Verkada ACC-INT-ANGLE video intercom angle mount and the compatible TD52 video intercom. The document provides details on mounting patterns, required tools, and compatibility. I'm ready to answer your questions about the installation process or the device specifications.
  • What tools are needed for installation?
    Which video intercom is compatible with this mount?
    What are the different hole patterns for?
Install Guide
ACC-INT-ANGLE Video Intercom Angle Mount
Hole Patterns
A
B
C
D
E
Direct wall mounting
Double gang junction box
U.S. Single gang junction box
Octagonal Junction Box
U.K. Single gang junction box
What you’ll need
●TD52 Video Intercom
●A #2 Phillips screwdriver or
power drill with a #2 Phillips driver bit
●Power drill and 1/2 inch (12.7mm) drill
bit, or larger if needed, for routing cable
through wall
●4x wood screws (#8-#12) or 4x
masonry screw and anchors
Compatible Products
●TD52 Video Intercom
Support
Thank you for purchasing this Verkada
product. If for any reason you're
experiencing issues or need assistance,
please contact our 24/7 Technical
Support Team immediately.
Sincerely,
The Verkada Team
verkada.com/support
Verkada Inc. 406 E. 3rd Ave, San Mateo, CA 94401
[email protected]
All specifications are subject to change without notice
Copyright © 2023 Verkada Inc. All rights reserved.
/