Wireless Rear I Sound
Perfect sound does not depend on
cabling.
Technical information
Wireless data transmission to the rear
speaker.
Transmission from the receiver to the
rear speaker by cable assures
undistorted premium surround sound.
The receiver is compatible with all
Loewe passive speakers.
Chrome Silver67202T00 4011880102445
Article number EAN Colour options
Technical specifications, delivery conditions, and other
information are subject to change without notice.
General:
Channel separation (1 kHz): > 90 dB
Digital wireless path
Frequency change: automatic
Frequency response: 20 Hz - 20 kHz (-3dB)
Range: approx. 20m indoors/60m outdoors
Signal-to-noise ratio: > 90 dB
Transmission/reception frequency: 2,4 GHz
Connectors:
Receiver/amplifier: loudspeaker outputs: 2 gold-plated
terminal screws
Transmitter: Analogue Audio In: 2 (3.5 mm connector)
Transmitter: Digital Audio In: 2 (1 system connector)
Receiver/Amplifier:
Nominal power (audio amp): 2 x 48W/6 Ohm
Power consumption in stand-by mode/when switched on:
ca. 1W/ca. 30W
Transmitter:
Power consumption in stand-by mode/when switched on:
ca. 0,1W/ca. 3W
Accessories:
Audio link adapter cable
Plug-in power supply for transmitter
Stereo cinch 1/4“ cable (2 m)
Table stand for receiver
Wall mount for receiver
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Sony HT-SF470 User manual
-
Sony HT-AS5 User manual
-
Sony ht fs3 User manual
-
Dynaudio XEO 2 Owner's manual
-
Sony HT-SL900W Operating instructions
-
-
-
AKG Acoustics surround headphones User manual
-
-
Beyerdynamic Unite User manual