Sony HT-AS5 User manual

Brand: Sony

Model: HT-AS5

Category: AV receivers

Type: User manual

This manual is also suitable for

HT-AF5

4-166-572-11(2)

Home Theatre

System

Operating Instructions

HT-AF5

HT-AS5

To reduce the risk of fire or electric

shock, do not expose this apparatus to

rain or moisture.

To reduce the risk of fire, do not cover the

ventilation opening of the apparatus with

newspapers, tablecloths, curtain, etc.

Do not place the naked flame sources such as lighted

candles on the apparatus.

To reduce the risk of fire or electric shock, do not

expose this apparatus to dripping or splashing, and

do not place objects filled with liquids, such as

vases, on the apparatus.

Do not install the appliance in a confined space, such

as a bookcase or built-in cabinet.

As the main plug is used to disconnect the unit from

the mains, connect the unit to an easily accessible

AC outlet. Should you notice an abnormality in the

unit, disconnect the main plug from the AC outlet

immediately.

Do not expose batteries or apparatus with battery-

installed to excessive heat such as sunshine, fire or

the like.

To prevent injury, this apparatus must be securely

attached to the floor/wall in accordance with the

installation instructions.

For customers in Europe

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the product or on its packaging

indicates that this product shall not be treated as

household waste. Instead it shall be handed over to

the applicable collection point for the recycling of

electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help

prevent potential negative consequences for the

environment and human health, which could

otherwise be caused by inappropriate waste

handling of this product. The recycling of materials

will help to conserve natural resources. For more

detailed information about recycling of this product,

please contact your local Civic Office, your

household waste disposal service or the shop where

you purchased the product.

Disposal of waste batteries

(applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the battery or on the packaging

indicates that the battery provided with this product

shall not be treated as household waste.

On certain batteries this symbol might be used in

combination with a chemical symbol. The chemical

symbols for mercury (Hg) or lead (Pb) are added if

the battery contains more than 0.0005% mercury or

0.004% lead.

By ensuring these batteries are disposed of correctly,

you will help prevent potentially negative

consequences for the environment and human health

which could otherwise be caused by inappropriate

waste handling of the battery. The recycling of the

materials will help to conserve natural resources.

In case of products that for safety, performance or

data integrity reasons require a permanent

connection with an incorporated battery, this battery

should be replaced by qualified service staff only.

To ensure that the battery will be treated properly,

hand over the product at end-of-life to the applicable

collection point for the recycling of electrical and

electronic equipment.

For all other batteries, please view the section on

how to remove the battery from the product safely.

Hand the battery over to the applicable collection

point for the recycling of waste batteries.

For more detailed information about recycling of

this product or battery, please contact your local

Civic Office, your household waste disposal service

or the shop where you purchased the product.

Notice for the customer in the

countries applying EU Directives

The manufacturer of this product is Sony

Corporation, 1-7-1 Konan Minato-ku Tokyo,

108-0075 Japan. The Authorized Representative for

EMC and product safety is Sony Deutschland

GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters

please refer to the addresses given in separate

service or guarantee documents.

WARNING

About This Manual

• The instructions in this manual are for model

HT-AF5 and HT-AS5. In this manual, models of

area code CEL is used for illustration purposes

unless stated otherwise. Any difference in

operation is clearly indicated in the text, for

example, “Models of area code CEK only”.

• The instructions in this manual describe the

controls on the supplied remote. You can also use

the controls on the system if they have the same or

similar names as those on the remote.

This system incorporates Dolby* Digital and Pro

Logic Surround and the DTS** Digital Surround

System.

* Manufactured under license from Dolby

Laboratories. Dolby, Pro Logic, and the double-

D symbol are trademarks of Dolby Laboratories.

** Manufactured under license under U.S. Patent

#’s: 5,451,942; 5,956,674; 5,974,380;

5,978,762; 6,487,535 & other U.S. and

worldwide patents issued & pending. DTS and

DTS Digital Surround are registered trademarks

and the DTS logos and Symbol are trademarks of

Reserved.

This system incorporates High-Definition

Multimedia Interface (HDMI

) technology.

HDMI, the HDMI Logo, and High-Definition

Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC in the United

States and other countries.

“x.v.Colour” and “x.v.Colour” logo are trademarks

of Sony Corporation.

“BRAVIA” is a trademark of Sony Corporation.

“PlayStation” is a trademark of Sony Computer

Entertainment Inc.

“S-AIR” and its logo are trademarks of Sony

Corporation.

About area codes

The area code of the system you purchased is

shown on the rear of the subwoofer (see the

illustration below).

Any differences in operation, according to the area

code, are clearly indicated in the text, for example,

“Models of area code AA only”.

EZW-T100

DMPORT

DIGITAL

ANTENNA

HDMI

0.7A MAX

DVD IN BD IN

FRONT R FRONT L SUR R SUR L

OPT IN COAX IN

VIDEO

CENTER

SAT/CATV IN TV OUT

ARC

DC5V

AUDIO IN AUDIO IN

FM 75

COAXIAL

CAL MIC

AUTO

SA-CD/CD TV

SAT/CATV TV

SPEAKERS

Area code

On copyrights

Table of Contents

Unpacking......................................................5

Description and location of parts...................8

Getting Started

1: Installing the speakers .............................16

2: Connecting the speakers..........................20

3: Connecting the audio/video

components.............................................21

4: Connecting the antennas (aerials)............25

5: Preparing the system ...............................26

6: Calibrating the appropriate settings

automatically(Auto Calibration).............27

Playback

Selecting a component.................................31

Enjoying sound/images from the

components connected to the system .....32

Enjoying Surround Sound

Selecting the sound field..............................34

Enjoying the sound at low volume

(NIGHT MODE) ....................................36

Tuner Operations

Listening to FM/AM radio ..........................36

Presetting radio stations...............................38

Using the Radio Data System (RDS) ..........40

“BRAVIA” Sync Features

What is “BRAVIA” Sync?...........................41

Preparing for the “BRAVIA” Sync..............41

Playing back components with one-touch

operation (One-Touch Play) ...................43

Enjoying the TV sound from the system’s

speakers (System Audio Control)...........44

Turning off the system with the TV

(System Power Off) ................................45

Using the power saving function

(HDMI Signal Pass Through) ................ 46

Enjoying the TV sound via an HDMI

connection (Audio Return

Channel (ARC))..................................... 47

Enjoying optimum sound field for the

selected scene (Scene Select)................. 48

Enjoying movies with the optimum sound

field (Theatre Mode) .............................. 48

S-AIR Operations

About S-AIR products ................................ 49

Setting up an S-AIR product....................... 50

Enjoying the system’s sound in another

room ....................................................... 55

Stabilizing S-AIR reception........................ 56

Changing the channel for better sound

transmission ........................................... 58

Enjoying the S-AIR receiver while the

S-AIR main unit is in standby mode...... 59

Advance Settings

Changing the input button assignments ...... 60

Settings and adjustments using the

amplifier menu ....................................... 61

Additional Information

Glossary ...................................................... 67

Precautions.................................................. 69

Troubleshooting .......................................... 71

Specifications.............................................. 76

Index ........................................................... 78

Unpacking

Be sure that you have the following items in your package.

HT-AF5 only

• Front speakers

(SS-TSB104) (2)

• Center speaker

(SS-CTB101) (1)

• Surround speakers

(SS-TSB101) (2)

• Subwoofer (SA-WA5) (1)

• AM loop antenna (aerial) (1)

• FM wire antenna (aerial) (1)

• Speaker cords

(3, Grey/Blue/Green)

• Remote commander

(RM-AAU074) (1)

• R6 (size-AA) batteries (2)

• Optimizer microphone

(ECM-AC2) (1)

• Bases (2)

• Screws (6)

• Speaker covers (2)

• Operating Instructions

(this manual)

• Quick Setup Guide

continued

HT-AS5 only

• Front speakers

(SS-TSB101) (2)

• Center speaker

(SS-CTB101) (1)

• Surround speakers

(SS-TSB101) (2)

• Subwoofer (SA-WA5) (1)

• AM loop antenna (aerial) (1)

• FM wire antenna (aerial) (1)

• Speaker cords

(5, Red/White/Grey/Blue/

Green)

• Remote commander

(RM-AAU074) (1)

• R6 (size-AA) batteries (2)

• Optimizer microphone

(ECM-AC2) (1)

• Operating Instructions

(this manual)

• Quick Setup Guide

VE S

AND

Insert two R6 (size-AA) batteries into

RM-AAU074 Remote Commander.

Observe the correct polarity when installing

batteries.

Notes

• Do not leave the remote in an extremely hot or

humid place.

• Do not use a new battery with old ones.

• Do not mix manganese batteries and other kinds of

batteries.

• Do not expose the remote sensor to direct sunlight

or lighting apparatuses. Doing so may cause a

malfunction.

• If you do not intend to use the remote for an

extended period of time, remove the batteries to

avoid possible damage from battery leakage and

corrosion.

• When you replace the batteries, the remote buttons

may be reset to their initial settings. If this

happens, reassign the buttons again (page 60).

• When the remote no longer operates the system,

replace all the batteries with new ones.

Inserting batteries into the

remote

Description and location of parts

Front view

Subwoofer

LEC

OLUME

INP

SELECT

OLUME

? /

2 3

Name Function

A ?/1

(on/standby)

Turns the system on or off

(pages 26, 32).

B INPUT

SELECTOR

Selects the input source to

playback (pages 28, 31,

32, 33, 37, 38, 39).

C VOLUME +/– Adjusts the volume level

of all speakers at the same

time (pages 31, 32, 71).

D Remote sensor Receives signals from the

remote.

E Display Displays the current status

of the selected component

or a list of selectable items

(page 9).

Name Function

F POWER/ACTIVE

STANDBY

indicator

Lights up as follows:

Green

The system is turned on.

No light

The system is in standby

mode, and Control for

HDMI and S-AIR standby

mode are set to off.

Amber

The system is in standby

mode, and Control for

HDMI* or S-AIR standby

mode is set to on.

* The indicator will not light

up when “PASS THRU” is

set to “THRU AUTO” and

no signals are detected.

Note

If the POWER/ACTIVE

STANDBY indicator

flashes, see page 75.

About the indicators on the display

LPCM NIGHT SLEEP HDMI COAX OPT TUNED ST S-AIR MUTING DTS

1 6578423

9q;qa

Name Function

A LPCM Lights up when Linear PCM

(Pulse Code Modulation) signals

are input.

B NIGHT Lights up when the Night Mode

function is set to on (page 36).

C SLEEP Lights up when the sleep timer is

activated (page 65).

D Input

indicators

HDMI

COAX

OPT

Light up when the digital signal

is input.

Digital signal is input through

the HDMI IN jack.

Digital signal is input through

the COAX IN jack.

Digital signal is input through

the OPT IN jack.

E Tuning

indicators

TUNED

Light up to indicate the current

status of the radio station

(page 36).

When receives a radio station.

When broadcasts in stereo mode.

F S-AIR Lights up when the S-AIR

transmitter (not supplied) is

connected.

G MUTING Lights up when the muting

function is activated (page 31).

Name Function

H DTS Lights up when the system is

decoding DTS signals.

Note

When playing a DTS format

disc, be sure that you have made

digital connections.

I Message

display area

Displays the volume level,

selected input source, audio

input signal, etc.

J D Lights up when the system is

decoding Dolby Digital signals.

Note

When playing a Dolby Digital

format disc, be sure that you

have made digital connections.

K Dolby Pro

Logic

indicators

PLII

Light up one of the respective

indicators when the system

applies Dolby Pro Logic

processing to 2 channel signals

in order to output the center and

surround channel signals.

Dolby Pro Logic

Dolby Pro Logic II

continued

Rear panel

A S-AIR

EZW-T100

slot

Connects to a

wireless transmitter

(not supplied)

(page 51).

B AUDIO INPUT section

AUDIO IN

jacks

Connects to a Super

Audio CD player,

CD player, etc.

(pages 21, 24).

EZW-T100

DMPORT

DIGITAL

ANTENNA

HDMI

0.7A MAX

DVD IN BD IN

FRONT R FRONT L SUR R SUR L

OPT IN COAX IN

VIDEO

CENTER

SAT/CATV IN TV OUT

ARC

DC5V

AUDIO IN AUDIO IN

FM 75

COAXIAL

CAL MIC

AUTO

SA-CD/CD TV

SAT/CATV TV

SPEAKERS

White (L)

Red (R)

C ANTENNA section

ANTENNA

jack

Connects to the

supplied FM wire

antenna (aerial)

(page 25).

ANTENNA

terminals

Connects to the

supplied AM loop

antenna (aerial)

(page 25).

D DIGITAL INPUT/OUTPUT section

HDMI IN/

OUT jacks

Connects to a DVD

player, satellite

tuner, or a Blu-ray

Disc player. The

image is output to a

TV or a projector

while the sound can

be output from a TV

or/and system’s

speakers (pages 21,

23).

OPT IN

jacks

Connects to a

satellite tuner, etc.

(pages 21, 23, 24).

COAX IN

jack

E SPEAKERS section

Connects to the supplied speakers

(page 20).

F DMPORT

DMPORT

jack

Connects to a

DIGITAL MEDIA

PORT adapter

(page 24).

G AUTO CALIBRATION

AUTO CAL

MIC jack

Connects to the

supplied optimizer

microphone for the

Auto Calibration

function (page 27).

You can use the supplied RM-AAU074

Remote Commander to operate the system and

to control the Sony audio/video components

that the remote is assigned to operate

(page 60).

RM-AAU074

Notes on using SHIFT (L) and

TV (M) button

SHIFT (L) button

Press and hold SHIFT (L), then press the

button with pink printing that you want to use.

Example: Press and hold SHIFT (L), then

press ENTER (D).

Remote commander

BD DVD

SAT/

CATV

TVVIDEO

SA-CD/

DMPORT

TUNER

qd qs

DMPORT

TUNER

ENTER

SHIFT

continued

TV (M) button

Press and hold TV (M), then press the button

with yellow printing to control the TV.

Example: Press and hold TV (M), then press

PROG + (K).

Basic operations

Tuner operations

DMPORT operations

To control the component

1 Press one of the input buttons

(TV, BD, DVD or SAT/CATV)

(U) to select the component

you want to operate.

The component assigned to the selected

input button becomes operable.

2 Referring to the following table,

press the corresponding

button for the operation.

Remote button Function

B ?/1

(on/standby)

Turns the system on or off.

To turn off all Sony

components, press ?/1 (B)

and AV ?/1 (A) at the same

time (SYSTEM

STANDBY).

G AMP MENU Displays the menu of the

system.

K SOUND FIELD

+*/–

Selects a sound field.

(Muting)

Activates the muting

function.

Press again to restore the

sound.

+/– Adjusts the volume level of

all speakers at the same time.

P V/v/B/b, Press V, v, B or b to select

the menu items. Then, press

to enter the selection.

U Input buttons

(VIDEO*)

Selects the component you

want to use. The buttons are

initial assigned to control

Sony components.

You can change the button

assignments following

the steps in “Changing the

input button assignments”

on page 60.

PROG +

Remote button Function

C Numeric

buttons

(number 5*)

Press and hold SHIFT (L),

then press the numeric

buttons (C) to preset/tune

to the preset stations.

D ENTER Press and hold SHIFT (L),

then press ENTER (D) to

enter the selection.

E D.TUNING Enters direct tuning mode.

MEMORY Stores a station.

F DISPLAY Displays information during

TUNER function.

I MENU/HOME Displays the tuner menu.

J PRESET +/– Selects a preset station.

TUNING +/– Scans a station.

P V/v/B/b, Selects a menu item and

enters the selection.

Remote button Function

J ./> Skips the track.

m/M Fast reverse or fast forward.

N* (playback)/

X (pause, press

again to resume

normal playback)/

x (stop)

Play mode buttons.

Common operations

To control the TV

Press and hold TV (yellow) button (M), then

press the button with yellow printing to control

the TV.

Remote button Function

A TV ?/1

AV ?/1

(on/standby)

Turns on or off the Sony TV

or audio/video components

that the remote is assigned to

operate (page 60).

Press ?/1 (B) and TV ?/1/

AV ?/1 (A) at the same

time to turn off the system

and other components that

the remote is assigned to

operate (SYSTEM

STANDBY).

C Numeric

buttons

(number 5*)

Press and hold SHIFT (L),

then press the numeric

buttons (C) to select

channels and tracks directly.

D ENTER Press and hold SHIFT (L),

then press ENTER (D) to

enter the selection.

P V/v/B/b, Selects a menu item and

enter the selection.

R Colour buttons Displays an operation guide

on the TV screen when the

colour buttons are available.

Follow the operation guide

to perform a selected

operation.

Remote button Function

C Numeric

buttons

(number 5*)

Selects channel. Press

ENTER (D) to change

channels immediately.

(Previous

channel)

Returns to the channel

previously watched (for

more than five seconds).

F * (Audio) Selects the sound from the

speaker for a stereo or

bilingual broadcast

Remote button Function

F DISPLAY – Displays the TV’s

information on the TV

screen. (Displays the

current channel number,

etc.)

– Press AMP MENU (G),

then press DISPLAY to

display the input stream

information of the TV

when TV is connected via

DIGITAL TV OPT IN

jack.

(Info/Text

reveal)

In digital mode: Displays

brief details of the program

currently being watched.

In analog mode: Displays

information such as current

channel number and screen

format.

In text mode: Reveals hidden

information (e.g. answers to

a quiz).

H TOOLS/

OPTIONS

Enables you to access

various viewing options and

change/make adjustments

according to the source and

screen format.

I MENU/HOME Allows you to select

channels or input sources and

change the settings for your

TV.

K PROG +*/–

c*/C

In TV mode: Selects the next

(+) or previous (–) channel.

In text mode: Selects the next

(Muting)

Activates the muting

function.

+/– Adjusts the volume level.

O O

RETURN/EXIT

Returns to the previous

screen of any displayed

menu.

(Guide)

Displays the guide when you

are watching analog and

digital channels.

S ANALOG Changes to analog mode.

DIGITAL Changes to digital mode.

(Text) Displays text.

continued

To control the DVD player/recorder,

Blu-ray Disc player/recorder

To control the HDD/DVD COMBO

Remote button Function

V THEATRE Sets the optimal picture

settings automatically for

watching movies, when you

connect a Sony TV which is

compatible with the

THEATRE button function.

Also, the audio is

automatically switched to

the audio output of this

system when you connect

the TV and the system with

HDMI connection, and the

Control for HDMI function

is set to on.

W /

(Input select/

Text hold)

In TV mode: Selects the TV

input signal.

In analog text mode: Holds

the current page.

Remote button Function

F * (Audio) Selects the sound from the

speaker for a stereo or

bilingual broadcast.

(Subtitle) Selects the subtitle language

when multi-lingual subtitles

are recorded on a Blu-ray

Disc or DVD.

(Angle) Switches to other viewing

angles when multi-angle are

recorded on a Blu-ray Disc

or DVD.

DISPLAY – Displays the playback

information.

– Press AMP MENU (G),

then press DISPLAY (F)

to display the input stream

information for Blu-ray

Disc or DVD.

I MENU/HOME Displays the menu.

Remote button Function

J . Skips chapter.

> Skips forward to the next

available chapter.

m/M Fast reverse or fast forward

the disc when pressed

during playback.

N* (playback)/

X (pause, press

again to resume

normal playback)/

x (stop)

Play mode buttons.

H TOOLS/

OPTIONS

Enables you to access

various viewing options and

change/make adjustments

according to the source and

screen format.

O O RETURN/

EXIT

Returns to the previous

screen of any displayed

menu.

(Guide)

Displays the guide when

you are watching analog or

digital channels.

S POP UP/MENU Displays the top menu or

disc menu.

TOP MENU

T CLEAR Clear a mistake when you

press the incorrect numeric

button.

Remote button Function

I MENU/HOME Displays the menu.

J ./> Specifies the previous or

next chapter or track.

m/M Fast reverse or fast forward

the disc when pressed

during playback.

N* (playback)/

X (pause, press

again to resume

normal playback)/

x (stop)

Play mode buttons.

S POP UP/MENU Displays the top menu or

disc menu.

TOP MENU

To control the SAT/CATV

* These buttons (number 5/VIDEO, , N,

PROG +/ SOUND FIELD +/ c) have tactile dots.

Use the tactile dots as reference when operating

the system.

Notes

• Some functions explained in this section may not

work depending on the model.

• The above explanation is intended to serve as an

example only. Therefore, depending on the

component, the above operation may not be

possible or may operate differently than described.

In this case, use the remote commander supplied

with the component.

Remote button Function

F DISPLAY – Displays the information

during SAT/CATV

function.

– Press AMP MENU (G),

then press DISPLAY (F)

to display the input stream

information for satellite

tuner or cable television

tuner.

I MENU/HOME Displays the menu.

(Guide)

Displays the guide menu.

1: Installing the speakers

This system allows you to use a 5.1 channel

speaker system. To fully enjoy theatre-like

multi channel surround sound, be sure to

connect all the speakers (two front speakers,

a center speaker and two surround speakers)

and a subwoofer (5.1 channel).

You can place your speakers as shown below.

A Front speaker (left)

B Front speaker (right)

C Center speaker

D Surround speaker (left)

E Surround speaker (right)

F Subwoofer

HT-AF5 only

HT-AS5 only

Notes

• Be sure to use only the supplied speakers.

• Do not lean on a speaker, as it may fall down.

• Do not place your hand into the slit of the

subwoofer when lifting it. The speaker driver may

be damaged.

Getting Started

Slits

Getting Started

Tips

• The angle A should be the same.

• Since the subwoofer does not emit highly

directional signals, you can place it wherever you

want. However, it is recommended to place the

subwoofer on the front edge of a table or rack, etc.,

to accept the remote signal correctly.

For greater flexibility in positioning the

speakers, you are recommended to use the

speaker stand as below.

The front speakers of HT-AF5 is provided

with the speaker stand, you need to

disassemble the speakers.

Install the front speakers on the wall. Keep the

speaker stand for future use.

To disassemble the front

speakers of HT-AF5

(SS-TSB104)

1 Disconnect the speaker cords.

2 Remove the screw

(pre-installed) at the rear of the

speaker.

This screw is used when reassembling the

speaker. Be sure not to lose the screw.

Installing the speakers on the

speaker stand

Model Speaker stand

HT-AF5 Supplied. For details, refer to

the supplied Quick Setup

Guide.

HT-AS5 Optional WS-FV11 or

WS-FV10D speaker stand

(available only in certain

countries).

For details, refer to the

operating instructions supplied

with the speaker stand.

30°30°

100°-120°100°-120°

A A

Installing the speakers on the

wall

Rear of the speaker

Screw

Rear of the speaker

continued

3 Disassemble the speaker by

lifting the upper part of the

speaker.

4 Pull out the speaker cord from

the bottom of the lower part of

the speaker.

The removed speaker cord is used when

installing the speaker on a wall.

5 Connect the removed speaker

cord into the front speaker

terminals.

6 Remove the speaker cover

from the protective cover.

7 Attach the speaker cover at the

bottom of the upper part of the

speaker.

Upper

part

Lower

part

Rear of the speaker

Lower part of the speaker

Speaker cord

Rear of the speaker

Protective cover

Speaker cover

Upper part of the speaker

Getting Started

To install the speakers on a wall

Before installing the speakers on a wall,

connect the speaker cord to the speaker. For

details, see “Connecting the speakers”

(page 20).

Caution

• Use screws that are suitable for the wall material

and strength. As a plaster board wall is especially

fragile, attach the screws securely to a beam and

fasten them to the wall. Install the speakers on a

vertical and flat wall where reinforcement is

applied.

• Contact a screw shop or installer regarding the

wall material or screws to be used.

• Sony is not responsible for accident or damage

caused by improper installation, insufficient wall

strength or improper screw installation, natural

calamity, etc.

1 Prepare screws (not supplied)

that are suitable for the hook on

the back of each speaker. See

the illustrations below.

2 Fasten the screws to the wall.

The screws should protrude

8 mm to 10 mm.

HT-AF5 only

For the front speakers

For the center speaker

For the surround speakers

4 mm

more than 25 mm

5 mm

10 mm

Hook on the back of the speaker

8 mm to 10 mm

304 mm

8 mm to 10 mm

219 mm

8 mm to 10 mm

continued

HT-AS5 only

For the front speakers and

surround speakers

For the center speaker

3 Hang the speakers on the

screws.

2: Connecting the

speakers

Before connecting the cords, be sure to

disconnect the AC power cord (mains lead).

A Front speaker (left)

B Front speaker (right)

C Center speaker

D Surround speaker (left)

E Surround speaker (right)

8 mm to 10 mm

219 mm

5 mm

10 mm

Rear of speaker

FRONT L SUR R SUR L FRONT R CENTER

DMPORT

DIGITAL

ANTENNA

HDMI

0.7A MAX

DVD IN BD IN

OPT IN COAX IN

VIDE

SAT/CATV IN TV OUT

ARC

DC5V

AUDIO IN AUDIO IN

FM 75

COAXIAL

CAL MIC

AUTO

SA-CD/CD TV

SAT/CATV TV

SPEAKERS

A Speaker cord (supplied)

Connector

Colour tube

Page is loading ...

Sony HT-AS5 User manual

Brand: Sony

Model: HT-AS5

Category: AV receivers

Type: User manual

This manual is also suitable for

HT-AF5

Download PDF

report

Sony HT-AS5 User manual

This manual is also suitable for

Sony HT-AS5 User manual

Related papers

Other documents