StarTrac Spinning
®
- Installation Checklist
Use the checklist below to ensure proper installation of StarTrac Spin
®
bikes:
All parts and hardware in the package are accounted for.
Ensure front and back leg braces are secured to frame.
Check the seat to make sure it is leveled, tight and does not rotate or tilt. Tighten and adjust as
needed.
Verify pedals are tightly secured to crank arms.
Bottom bracket is properly tightened.
Bottle cage tightly secured.
Verify flywheel alignment and belt/chain tension. Adjust as needed.
Ensure that adjustment knobs (seat height, seat fore & aft, and handlebar) are properly secured and do
not interfere with range of motion.
Test the handlebar and seat post to make sure they move freely and are able to lock at different
positions.
Adjust the leveling feet to ensure the unit is stable and leveled.
Overall visual & cosmetic inspection.
