LINKRICH 3PRMI1800 User manual

Brand
LINKRICH
Model
3PRMI1800
Category
Mixers
Type
User manual

This manual is also suitable for

1
PM series Power Mixer
Thanks for choosing LINKRICH products:
We mainly produce food processing equipment, baking equipment, professional kitchen equipment, steel kitchen ware,
commercial refrigeration equipment and ice cream machine, more than 6 series, 127 kinds of products for you to choose.
They are environment-friendly with excellent designs. High technique to save power, complete functions, easy to operate,
LINKRICH products are more competitive than those of the same line in the international market.
ATTENTION
⚫ New user or repairing this product must be performed by the experts or qualified person or those who have gotten
the license of installation, or those who are authorized by the manufacturer.
⚫ When installation or maintenance, please obey the following instructions carefully to ensure the safety use of this
appliance.
⚫ Please keep this instruction Manual for future reference, or hand it to next user.
⚫ Put off the package to make sure none of the parts is missing or damaged. If there is any doubt about the product,
please do not use it, and consult it to the experts.
⚫ Keep the packing material out of reach of the children to avoid accident( Especially the plastic bag, screw etc.)
⚫ This appliance could be only operated by the person who is familiar with the unit.
⚫ When not using the appliance or the operator is absent, please turn off the unit to avoid any accidental injury or
damage.
⚫ When it needs to be repaired, please ask for expert, and use the original fitted spare part. It will be dangerous if not
following the above requirements.
⚫ This appliance is just for commercial using, not for any other use, otherwise, it may be dangerous.
⚫ Do not rinse the equipment with water directly.
⚫ Clean the surface of stainless steel periodically with appropriate method to prevent any damage brought by
oxidization or any other chemical interference.
Safety regulations
Incorrect operation and improper use of the appliance can seriously damage the appliance and injure users.
The appliance may only be used for the purpose for which it was intended and designed. The manufacturer is not liable for
any damage caused by incorrect operation and improper use.
Keep the appliance and electrical plug away from water and any other liquids. In the unlikely event that the appliance
should fall into water, immediately pull the plug out of the socket and have the appliance checked by a certified technician.
Not following these instructions could give rise to life-threatening situations.
Never try to open the casing of the appliance yourself.
Do not insert any objects in the casing of the appliance.
Do not touch the plug with wet or damp hands.
Regularly check the plug and core for any damage .Should the plug or cord be damaged have it/them repaired by a
certified repair company.
Do not use the appliance after it has fallen or is damaged in any other way. Have it checked and repaired, if necessary, by a
certified repair company.
Do not try to repair the appliance yourself . This could give rise to life-threatening situations.
Make sure the core does not come in contact with sharp or hot objects and keep it away from open fire .To pull the plug
out of the socket , always pull on the plug and not on the core.
Make sure that no one can accidentally pull the core (or extension cord) loose or trip over the cord.
Always keep an eye on the appliance when in use.
Always pull the plug out of the socket when the appliance is not being used and always before cleaning.
Warning ! as long as the plug is in the socket the appliance is connected to the power source.
Turn off the appliance before pulling the plug out of the socket.
Never carry the appliance by the cord.
Do not use any extra devices that are not supplied along with the appliance.
2
Accessory
PM-500T PM-500 A B C D PM-350L
PM-750T PM-750 PM-350WLB
Model
Voltage
(V)
Power
(w)
Mixing Speed
(r/min)
Net Weight
(kg)
PM-500B
220
370
12000
1.8
PM-500WLB
220
370
3000~12000
1.8
PM-500A/B/C
220
550
12000
4
PM-500T-A/B/C
220
550
3800~12000
4
PM-500T-AD/BD/CD
220
550
3000~12000
6
PM-750A/B/C
220
750
12000
4
PM-750T-A/B/C
220
750
3800~12000
6
Option
If you want to use the product to mix ,grind ,and smooth soups, sauces and other liquid preparationsPlease select the
combined unit of Power drive and Stir shaft.
If you want to use the product to emulsify, mix, and whip egg whites, mayonnaises and purees. Please select the
combined unit of Power drive and egg beater head.
Assembling
Under the premise of the embolus which in the lower end of Power drive and the top of Stir shaft（or Egg beater head）
anastomosis together , Please connected Power drive and Stir shaft（or Egg beater head）together by the screwed
plastic connecting sleeve which on the Power drive. Clockwise to tighten, counter-clockwise to loosen.
embolus
plastic connecting sleeve
3
Open power
Note: Do not plug/unplug the product into/from the electrical outlet with a wet hand.
Make sure the A/C power supply before operation is the same with the rating label and in accordance with
Safety instruction.
Please confirm all the button are in the “off ” positions before operation.
Operation
A:Protection switch
B:position-limited switch
C: operation switch
Hold the handle on one hand, and
press the Protection switch by thumb.
Press the operating button by other four fingers, and then the mixer begin to
run.
this time press the position- limited switch button by the
other hand.
At this time the Protection button、operating button、Position-limited button are all pressed.
B
C
4
End.
To stop press the operate button by one hand, then loosen it, the operating
system return to original state. Then the mixer stop running.
A protection button B operation switch
C variable speed switch D manual reset fuse
1. Press button A and B together, then the machine start running
2. Use knob C to adjust the rpm(3000 —12000rpm)
3. The machine overload trip need to press D
4. Loosen A and B to disengage the stick blender
Operation Note
Do not touch the mixer, the mixer can keep running automatically.
Do not touch the moving parts (e.g. the blade) while the mixer is in using.
The food vessel must be strong, which size had better to match with beater tube. The vessel depths are more than 30CM
and the vessel diameter are more than 20CM.Food quantity generally dose not surpass the vessel volume 2/3, prevented
food splashes outside the vessel.
Disassembling
Make the screwed plastic connecting sleeve counterclockwise rotation , separate the Power drive and Stir shaft（or Egg
beater head）
Cleaning
Please power off before clean the machine.
The power drive、stir shaft and egg beater head must separate then clean.
The driver section is loaded with the motor and the electric appliance, which only clean by the dry cloth.
Stir shaft head and cover tube may use water to clean. But it must prevent the water into shaft. Separating
Counter clock wise rotation
D
C
A
B
5
the whisk and egg beater may clean together. It probably will be damaged the gear system , if the water flow into shaft.
Please put on the glove, in order to avoid scratches and hurts the hand.
Preserve in not the mosit. none pollution environment. To keep the machine in a good condition.
Machine Illustration:
No.
Name
No.
Name
No.
Name
1
The handle
17
The stator screw
33
Beat egg head frame
2
The handle
18
bearing
34
Transmission tower
3
The handle switch
19
The rotor
35
Gearbox cover
4
To protect the button
20
Long screw
36
Transmission gear
5
Big spring
21
The flange
37
Helical gear
6
Switch
22
Connected set of
38
Gear shaft
7
The lock button
23
Pipe joint
39
Calories spring
8
Small spring
24
Big nut
40
The little spring
9
The handle connection piece
25
Connecting rod
41
The shaft
10
Carbon brush
26
mandrel
42
Egg joint
11
The carbon brush holder
27
Oil seal
43
Speed switches
12
The carbon brush holder cap
28
In the bearing seat
44
Speed switch knob
13
chassis
29
Oil seal 18
45
The fuse holder
14
On the motor end cover
30
Bearing
46
The fuse
15
The stator
31
Cap
47
The power cord
16
Under the motor end cover
32
Cutting head
48
Protection switch
ONE YEAR PARTS WARRANTY
LINKRICH warrants to the original purchaser of every new LINKRICH product, under normal and proper use and
maintenance service as specified by LINKRICH and upon proper installation and start-up in accordance with the instruction
packet supplied with each LINKRICH unit. LINKRICH’s obligation under this warranty is limited to a period of one (1) year
from the date of original installation.
6
WARRANTY CLAIMS
All claims for parts must be made directly through LINKRICH. All claims should include:
Personal Details: Products Details:
Your name Model number
Your company Serial number of the product
Address Date of purchase
Email Proof of purchase
Phone
Pertinent information supporting the existence of the alleged defect.(Such as picture etc.)
Please send the above information to Service@chinalinkrich.com or Fax to +86 20 87607453
Our warranty departments will according to the actual situation and reply you within
24hours.
What is not conected by this Warranty
Linkrich’s sole obligation under this warranty is limited to replacement of parts, Subject to the additional limitations below.
This warranty neither assumes nor authorizes any person to assume obligations other than those expressly covered by this
warranty. This warranty is limited to replacement of parts, and the shipment charge is not included.
No consequential damages. Linkrich is not responsible for Economic loss; or special, indirect, or consequential damages,
including without limitation, losses or damages arising from food or product spoilage claims whether or not account of
refrigeration failure.
Warranty is not transferable. This warranty is not assignable and applies only in favor the original purchaser/user to whom
delivered. Any such assignment or transfer shall avoid the warranties herein made and shall avoid all warranties, express or
implied, including any warranty of merchantability or fitness for a particular purpose.
Improper usage . Linkrich assumes no liability for parts or labor coverage for component failure or other damages resulting
from improper usage or installation or failure to clean and/or maintain product as set forth in the warranty packet
provided with the unit.
Residential applications: linkrich assumes no liability for parts or labor coverage for component failure or other damages
resulting from installation in non-commercial or residential applications.
Alteration, neglect, abuse, issue, accident, damage during transit or installation, fire, flood, acts of god. Linkrich is not
responsible for the repair or replacement of any parts that linkrich determines have been subjected after the date of
manufacture to alteration, neglect, abuse, accident, damage during transit or installation, fire, flood, or act of god.
Improper electrical connections. Linkrich is not responsible for the repair or replacement of failed or damaged
components resulting from electrical power failure, the use of extension cords, low voltage, or voltage drops to the unit.
No implied warranty of merchantability or fitness for a particular purpose: there are no other warranties, expressed,
implied or statutory, except the one (1) year parts warranty as described above. These warranties are exclusive and in lieu
of all other warranties, including implied warranty and merchantability or fitness for a particular purpose. These are no
warranty which extend beyond the description on the face hereof.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

LINKRICH 3PRMI1800 User manual

Brand
LINKRICH
Model
3PRMI1800
Category
Mixers
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents