LINKRICH 3PRWF1220 User manual

Brand
LINKRICH
Model
3PRWF1220
Type
User manual
1
Cone & Waffle Baker
Thanks for choosing LINKRICH products:
We mainly produce food processing equipment, baking equipment, professional kitchen equipment, steel kitchen ware,
commercial refrigeration equipment and ice cream machine, more than 6 series, 127 kinds of products for you to choose.
They are environment-friendly with excellent designs. High technique to save power, complete functions, easy to operate,
LINKRICH products are more competitive than those of the same line in the international market.
ATTENTION
⚫ New user or repairing this product must be performed by the experts or qualified person or those who have gotten
the license of installation, or those who are authorized by the manufacturer.
⚫ When installation or maintenance, please obey the following instructions carefully to ensure the safety use of this
appliance.
⚫ Please keep this instruction Manual for future reference, or hand it to next user.
⚫ Put off the package to make sure none of the parts is missing or damaged. If there is any doubt about the product,
please do not use it, and consult it to the experts.
⚫ Keep the packing material out of reach of the children to avoid accident( Especially the plastic bag, screw etc)
⚫ This appliance could be only operated by the person who is familiar with the unit.
⚫ When not using the appliance or the operator is absent, please turn off the unit to avoid any accidental injury or
damage.
⚫ When it needs to be repaired, please ask for expert, and use the original fitted spare part. It will be dangerous if not
following the above requirements.
⚫ This appliance is just for commercial using, not for any other use, otherwise, it may be dangerous.
⚫ Do not rinse the equipment with water directly.
⚫ Clean the surface of stainless steel periodically with appropriate method to prevent any damage brought by
oxidization or any other chemical interference.
This machine is one of the latest style food cooker. It is populate with the advantage of clean, sanitation, easy to operation
and power saving.
Technical parameter
Model
Voltage
(V)
Power
(Kw)
Temperature
(℃)
Net Weight
(kg)
Dimensions
(mm)
LR-WB-01
220
1.2
0~300
6
250x430x250
LR-WB-02
220
2.4
0~300
12
500x430x250
LR-WBL-01
220
1.2
0~300
6
250x430x250
LR-WBL-02
220
2.4
0~300
12
500x430x250
LR-CM-01
220
1.2
0~300
7
250x430x250
LR-CM-02
220
2.4
0~300
13
500x430x250
Notice
The power voltage must the same with the machine required, it can wave in 10%.
It need to fix the power switch or fuses(10A) and leakage protector (≤30mA). It can’t store things in front of the machine.
Make sure the parts of the machine is fasten, the power supply connected is correct, the grounding is reliable.
The temperature adjust range is between 50~300℃.
The equipment can set the time to notice the operation time. It is not relate to the equipment capability.
Operation
2
Prepare the material of making waffle. We strongly comment user buy special material. Please add leavening agent and
emulsifier if you make the waffle mater by yourself. The formula: eggs 200g, water :200g, muffin power:400g. Egg can
increase the resilience to the waffle or it will tear up when open the upper mould.
It must take about 12 minutes from turn on to reach the 250℃
Insert the plug into the socket to connect the power supply and the lamp is on the machine is heating. The machine can
keep the temperature at about 250℃ by turn on or off automatically
When the temperature reach 250℃，spread some plant oil on the mode then fill the sizing material in the mode, cover it
and set the time. It is finished when hearing the sound “ding”. Cut off the power supply after used.
The baking time can be set by yourself according to sizing material or the colour of food that customer like. Generally
speaking, the colour will be darker if the baking time is longer and lighter on the contrary. The time can not be too short or
the food will not ripe.
The cleaning of the equipment: cleaned it by the wet to be with cleanness fluid. Do not clean it directly by water or dip in
water or it will destroy the machine electric capacity and build a accident.
Structure instruction
LR-WB-01 LR-WB-02 LR-WBL-01 LR-WBL-02 LR-CM-01 LR-CM-02
Remark: the diagram is for LR-WB-01, the structure of the other machines are similar to it, but the quantity of parts and
the appearance will be not the same.
Name
NO
Name
Top mould cover bolt
14
Switch
Top mould cover
15
Pilot lamp
Cross slab inside
16
Thermostat
Bolt
17
Timer
M10 nut
18
Bottom board
Handle
19
Basic foot
Heat tube
20
Foot bolt
Top mould
21
Power wire
Lower mould
22
Lead collar
Bracket
23
Lower free bearing
Screw cap
24
Upper free bearing
Lower mould cover
25
Heat board
Crust
26
Back stand
3
LR-WBX-01 LR-WBX-02
NO
Name
NO
Name
NO
Name
1
Gland screw
11
Draff tray
21
Lowe mould seat
2
Mould cover
12
Front bracket seat
22
Marble cover
3
Cross slab inside
13
Bottom tray
23
HEX SHCS
4
Heat tube fix board
14
Power switch
24
Limit board
5
Heat tube
15
Alarm
25
Power wire
6
Upper mould
16
Control board 1
26
Lead collar
7
M10 nut
17
Bottom board
27
Back seat board
8
Handle
18
Basic foot
28
Retainer ring
9
Lower mould
19
Foot stopple
29
Rotary axle
10
HES SHCS
20
Control board 2
30
Upper mould seat
Circuit diagram
TM: temperature controller R1/R2: heating tube K: power switch HL: heat light
The normal problem and resolution
A. Connect the power supply. The pilot lamp goes on, but no heat.
1. The thermostat is broken. Change it.
2. The heat tube is burnt out. Change one.
B. The pilot lamps go on, but the temperature rises but can be controlled.
4
The thermostat is broken, change it.
C. It can heat but the pilot lamp does not go on
The pilot lamp is burnt out, change it.
D. The pilot lamp does not go on, and no heat.
The power supply is abnormal or the fuse is burnt out, check it or change a fuse.
ONE YEAR PARTS WARRANTY
LINKRICH warrants to the original purchaser of every new LINKRICH product, under normal and proper use and
maintenance service as specified by LINKRICH and upon proper installation and start-up in accordance with the instruction
packet supplied with each LINKRICH unit. LINKRICH’s obligation under this warranty is limited to a period of one (1) year
from the date of original installation.
WARRANTY CLAIMS
All claims for parts must be made directly through LINKRICH. All claims should include:
Personal Details: Products Details:
Your name Model number
Your company Serial number of the product
Address Date of purchase
Email Proof of purchase
Phone
Pertinent information supporting the existence of the alleged defect.(Such as picture etc.)
Please send the above information to Service@chinalinkrich.com or Fax to +86 20 87607453
Our warranty departments will according to the actual situation and reply you within
24 hours.
What is not connected by this Warranty
Linkrich’s sole obligation under this warranty is limited to replacement of parts, Subject to the additional limitations below.
This warranty neither assumes nor authorizes any person to assume obligations other than those expressly covered by this
warranty. This warranty is limited to replacement of parts, and the shipment charge is not included.
No consequential damages. Linkrich is not responsible for Economic loss; or special, indirect, or consequential damages,
including without limitation, losses or damages arising from food or product spoilage claims whether or not account of
refrigeration failure.
Warranty is not transferable. This warranty is not assignable and applies only in favor the original purchaser/user to whom
delivered. Any such assignment or transfer shall avoid the warranties herein made and shall avoid all warranties, express or
implied, including any warranty of merchantability or fitness for a particular purpose.
Improper usage . Linkrich assumes no liability for parts or labor coverage for component failure or other damages resulting
from improper usage or installation or failure to clean and/or maintain product as set forth in the warranty packet
provided with the unit.
Residential applications: linkrich assumes no liability for parts or labor coverage for component failure or other damages
resulting from installation in non-commercial or residential applications.
Alteration, neglect, abuse, issue, accident, damage during transit or installation, fire, flood, acts of god. Linkrich is not
responsible for the repair or replacement of any parts that linkrich determines have been subjected after the date of
manufacture to alteration, neglect, abuse, accident, damage during transit or installation, fire, flood, or act of god.
Improper electrical connections. Linkrich is not responsible for the repair or replacement of failed or damaged
components resulting from electrical power failure, the use of extension cords, low voltage, or voltage drops to the unit.
No implied warranty of merchantability or fitness for a particular purpose: there are no other warranties, expressed,
implied or statutory, except the one (1) year parts warranty as described above. These warranties are exclusive and in lieu
of all other warranties, including implied warranty and merchantability or fitness for a particular purpose. These are no
warranty which extend beyond the description on the face hereof.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

LINKRICH 3PRWF1220 User manual

Brand
LINKRICH
Model
3PRWF1220
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents