Page is loading ...
Edition C
175-000386-00
DA-DHR6802+: Dual 1×4 3-Gb/s/HD / SD
Distribution Amplifiers with Reclocking
DA-DSR6802+: Dual 1×4 SD-SDI Distribution
Amplifiers with Reclocking
DA-DH6802+: Dual 1×4 3-Gb/s/HD / SD
Distribution Amplifiers
DA-DS6802+: Dual 1×4 SD-SDI Distribution
Amplifiers
DA-HR6802+: Single 1×8 3-Gb/s/HD / SD
Distribution Amplifiers with Reclocking
DA-H6802+: Single 1×8 3-Gb/s/HD / SD
Distribution Amplifiers
Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
6800+
DA-DHR6802+: Dual 1×4 3 Gb/s / HD / SD
Distribution Amplifiers with Reclocking
DA-DH6802+: Dual 1×4 3 Gb/s/HD / SD
Distribution Amplifiers
DA-DSR6802+: Dual 1×4 SD-SDI
Distribution Amplifiers with Reclocking
DA-DS6802+: Dual 1×4 SD-SDI
Distribution Amplifiers
DA-HR6802+: Single 1×8 3 Gb/s / HD / SD
Distribution Amplifiers with Reclocking
DA-H6802+: Single 1×8 3 Gb/s / HD / SD
Distribution Amplifiers
Installation and Operation Manual
Edition C
October 2007
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Copyright Information
Copyright 2007 Harris Corporation, 1025 West NASA Boulevard,
Melbourne, Florida 32919-0001 U.S.A. All rights reserved. This
publication supersedes all previous releases. Printed in Canada.
This product and related documentation are protected by copyright and
are distributed under licenses restricting their use, copying, distribution,
and decompilation. No part of this product or related documentation
may be reproduced in any form by any means without prior written
authorization of Harris Corporation and its licensors, if any.
This publication could include technical inaccuracies or typographical
errors. Changes are periodically added to the information herein; these
changes will be incorporated into new editions of the publication.
Harris Corporation may make improvements and/or changes in the
product(s) and/or the program(s) described in this publication at any
time.
Warranty Information
The limited warranty policy provides a complete description of your
warranty coverage, limitations, and exclusions, as well as procedures
for obtaining warranty service. To view the complete warranty, visit our
website.
This publication is provided “as is” without warranty of any kind, either
express or implied, including, but not limited to, the implied warranties
of merchantability, fitness for a particular purpose, or non-infringement.
DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual iii
Contents
Preface
Manual Information .............................................................................. vii
Purpose ........................................................................................... vii
Audience ........................................................................................ vii
Revision History ........................................................................... viii
Writing Conventions ....................................................................... ix
Obtaining Documents ..................................................................... ix
Unpacking/Shipping Information ............................................................x
Safety Standards and Compliances ........................................................ xi
Safety Terms and Symbols ............................................................. xi
Restriction on Hazardous Substances (RoHS) Directive ............... xii
Waste from Electrical and Electronic Equipment
(WEEE) Directive ......................................................................... xiii
Chapter 1: Introduction
Overview ...................................................................................................1
Product Description ..................................................................................2
Main Features ...................................................................................2
Typical Broadcast and Production Applications ..............................4
Module Descriptions ................................................................................5
Front Module ....................................................................................5
Back Modules ...................................................................................5
Signal Flow ..............................................................................................7
Chapter 2: Installation
Overview ...................................................................................................9
Maximum 6800+ Frame Power Ratings ................................................10
iv DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual
Contents
Unpacking the Module .......................................................................... 11
Preparing for Installation ............................................................... 11
Checking the Packing List ............................................................. 12
Setting Jumpers ..................................................................................... 14
Setting J1/J2 Jumpers ..................................................................... 14
Setting J3 Jumpers ......................................................................... 15
Setting J4/J5 Jumpers ..................................................................... 16
Installing 6800+ Modules ..................................................................... 18
Required Frames and Back Module Connector Types .................. 18
Installing Modules .......................................................................... 18
Removing Modules ........................................................................ 18
Making Connections .............................................................................. 18
Chapter 3: Operation
Overview ................................................................................................ 19
Operating Notes ..................................................................................... 20
Understanding Jumper Controls............................................................. 20
Introducing Jumper Control Types ................................................ 20
J1/J2 Jumpers ................................................................................. 21
J3 Jumpers ...................................................................................... 21
J4/J5 Jumpers ................................................................................. 21
Understanding Parameter Types ............................................................ 22
Adjustable Parameters .................................................................... 22
Read-Only Parameters ................................................................... 22
Setting Locally Controlled Parameters ................................................. 23
Local Control Reclocking Mode .................................................... 23
Setting Remotely Controlled Parameters .............................................. 24
Changing Parameter Settings ................................................................ 26
Recalling Default Parameter Settings ............................................ 26
Reading the Software Version ....................................................... 26
Reading the Hardware Version ...................................................... 26
LEDs and Alarms .................................................................................. 27
Module Status Indicator LED ........................................................ 27
Module-Specific LEDs .................................................................. 28
Alarms ............................................................................................ 29
Chapter 4: Specifications
Overview ................................................................................................ 31
Inputs ..................................................................................................... 32
Outputs .................................................................................................. 33
Performance .......................................................................................... 34
DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual v
Contents
Power Consumption ................................................................................34
Temperature ...........................................................................................34
Start-Up Time ........................................................................................34
Index
Keywords ...............................................................................................35
vi DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual
Contents
DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual vii
Preface
Manual Information
Purpose
This manual details the features, installation procedures, operational
procedures, and specifications of the following distribution amplifiers:
• DA-DHR6802+ dual 1×4 3-Gb/s / HD / SD distribution amplifiers
with reclocking
• DA-DH6802+ dual 1×4 3-Gb/s / HD / SD distribution amplifiers
• DA-DSR6802+ dual 1×4 SD-SDI distribution amplifiers with
reclocking
• DA-DS6802+ dual 1×4 SD-SDI distribution amplifiers
• DA-HR6802+ single 1×8 3-Gb/s / HD / SD distribution amplifiers
with reclocking
• DA-H6802+ single 1×8 3-Gb/s / HD / SD distribution amplifiers
Audience
This manual is written for engineers, technicians and operators
responsible for the installation, setup, and / or operation of the
DA-DHR/DH/DSR/DS/HR/H6802+ distribution amplifiers.
viii DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual
Preface
Revision History
Table P-1. Manual Revision History
Edition Date Revision History
A May 2007 Initial release
B August 2007 Added information about single channel
distribution amplifiers
C October 2007 Removed information about single channel
SD-SDI distribution amplifiers
DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual ix
Preface
Writing Conventions
To enhance your understanding, the authors of this manual have
adhered to the following text conventions:
Obtaining Documents
Technical documents can be viewed or downloaded from our website.
Alternatively, contact your Customer Service representative to request a
document.
Table P-2. Manual Style and Writing Conventions
Term or
Convention
Description
Bold Indicates dialog boxes, property sheets, fields, buttons,
check boxes, list boxes, combo boxes, menus, submenus,
windows, lists, and selection names.
Italics Indicates email addresses, the names of books or
publications, and the first instances of new terms and
specialized words that need emphasis.
CAPS Indicates a specific key on the keyboard, such as ENTER,
TAB, CTRL, ALT, or DELETE.
Code
Indicates variables or command-line entries, such as a
DOS entry or something you type into a field.
> Indicates the direction of navigation through a hierarchy
of menus and windows.
hyperlink Indicates a jump to another location within the electronic
document or elsewhere
Internet address
Indicates a jump to a website or URL
Note
Indicates important information that helps to avoid and
troubleshoot problems.
x DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual
Preface
Unpacking/Shipping Information
This product was carefully inspected, tested, and calibrated before
shipment to ensure years of stable and trouble free service.
1. Check equipment for any visible damage that may have occurred
during transit.
2. Confirm that you have received all items listed on the packing list.
3. Contact your dealer if any item on the packing list is missing.
4. Contact the carrier if any item is damaged.
5. Remove all packaging material from the product and its associated
components before you install the unit.
Keep at least one set of original packaging, in the event that you need to
return a product for servicing. If the original packaging is not available,
you can purchase replacement packaging at a modest cost or supply
your own packaging as long as it meets the following criteria:
• Withstands the weight of the product
• Holds the product rigid within the packaging
• Leaves at least two inches of space between the product and the
container
• Protects the corners of the product
Ship products back to us for servicing prepaid and, if possible, in the
original packaging material. If the product is still within the warranty
period, we will return the product prepaid after servicing.
DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual xi
Preface
Safety Standards and Compliances
See the 6800+ Safety Instructions and Standards Manual to find the
safety standards and compliances for this 6800+ series product. A
safety manual is shipped with every FR6802+ Frame Installation and
Operation Manual and can be downloaded from our website.
Alternatively, contact your Customer Service representative for a copy
of this safety manual.
Safety Terms and Symbols
This product manual uses the following safety terms and symbols to
identify certain conditions or practices. See the 6800+ Safety
Instructions and Standards Manual for more information.
Table P-3. Safety Terms and Symbols
WARNING: Identifies conditions or practices that can result in
personal injury or loss of life—high voltage is present.
Uninsulated dangerous voltage within the product’s enclosure
may be sufficient to constitute a risk of electric shock to persons.
CAUTION: Identifies conditions or practices that can result in
damage to the equipment or other property. Important operating
and maintenance (servicing) instructions are included in the
literature accompanying the product.
xii DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual
Preface
Restriction on Hazardous Substances (RoHS) Directive
Directive 2002 / 95 / EC—commonly known as the European Union
(EU) Restriction on Hazardous Substances (RoHS)—sets limits on the
use of certain substances found in electrical and electronic equipment.
The intent of this legislation is to reduce the amount of hazardous
chemicals that may leach out of landfill sites or otherwise contaminate
the environment during end-of-life recycling. The Directive, which
took effect on July 1, 2006, refers to the following hazardous
substances:
• Lead (Pb)
• Mercury (Hg)
• Cadmium (Cd)
• Hexavalent Chromium (Cr-V1)
• Polybrominated Biphenyls (PBB)
• Polybrominated Diphenyl Ethers (PBDE)
In accordance with this EU Directive, products sold in the European
Union will be fully RoHS-compliant and “lead-free.” (See our website
for more information on dates and deadlines for compliance.) Spare
parts supplied for the repair and upgrade of equipment sold before
July 1, 2006 are exempt from the legislation. Equipment that complies
with the EU directive will be marked with a RoHS-compliant symbol,
as shown in Figure P-1.
Figure P-1. RoHS Compliance Symbol
DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual xiii
Preface
Waste from Electrical and Electronic Equipment
(WEEE) Directive
The European Union (EU) Directive 2002 / 96 / EC on Waste from
Electrical and Electronic Equipment (WEEE) deals with the collection,
treatment, recovery, and recycling of electrical and electronic waste
products. The objective of the WEEE Directive is to assign the
responsibility for the disposal of associated hazardous waste to either
the producers or users of these products. As of August 13, 2005,
producers or users are required to recycle electrical and electronic
equipment at end of its useful life, and must not dispose of the
equipment in landfills or by using other unapproved methods. (Some
EU member states may have different deadlines.)
In accordance with this EU Directive, companies selling electric or
electronic devices in the EU will affix labels indicating that such
products must be properly recycled. (See our website for more
information on dates and deadlines for compliance.) Contact your local
Sales representative for information on returning these products for
recycling. Equipment that complies with the EU directive will be
marked with a WEEE-compliant symbol, as shown in Figure P-2.
Figure P-2. WEEE Compliance Symbol
xiv DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual
Preface
DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual 1
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 1
Introduction
Overview
The following topics are described in this chapter:
• “Main Features” on page 2
• “Module Descriptions” on page 5
• “Product Description” on page 2
• “Signal Flow” on page 7
2 DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 1: Introduction
Product Description
The DA-DHR/DH/DSR/DS/HR/H6802+ series of distribution
amplifiers are designed to distribute serial digital video signals
according to SMPTE 257C, 292M, 424M, DVB, and other related
standards. They feature high reliability, excellent video performance,
and low cost.
The individual modules are available in the following configurations:
• DA-DHR6802+: dual channel 3-Gb/s / HD / SD distribution
amplifiers with reclocking (see page 2 for a list of its main features)
• DA-DH6802+: dual channel 3-Gb/s / HD / SD distribution
amplifiers (see page 3 for a list of its main features)
• DA-DSR6802+: dual channel SD distribution amplifiers with
reclocking (see page 3 for a list of its main features)
• DA-DS6802+: dual channel SD distribution amplifiers (see page 3
for a list of its main features)
• DA-HR6802+: single channel 3-Gb/s / HD / SD distribution
amplifiers with reclocking (see page 4 for a list of its main features)
• DA-H6802+: single channel 3-Gb/s / HD / SD distribution
amplifiers (see page 4 for a list of its main features)
You can set up, control, and monitor these distribution amplifier
modules either locally (via a card-edge jumper) or remotely (via
RS-232 ports or optional ICE6800+ Ethernet connection).
Main Features
DA-DHR6802+
• Configurable as a single channel of one input and eight outputs
(1×8), or two independent channels of one input and 4 outputs
• Enable automatic switching input between input 1 and input 2 in the
l×8 configuration when a loss of the input signal is detected
• Input signal presence detect and report
• Automatic input cable equalization
• Maximum equalized cable length adjustable (for 270Mb/s and
remotely only)
• Reclocking Mode selectable as automatic or manual
• Re-lockable for 270Mb/s, 1.5Gb/s and 3.0Gb/s SMPTE signal
DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual 3
Chapter 1: Introduction
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
• Re-lockable for DVB-ASI signal
• Reclock status and rate report by LEDs
• Reclocking Bypass mode is selectable as automatic or enforced
• Card edge control by jumpers with LED display
• Remote control via RS-232 or Ethernet
DA-DH6802+
• Configurable as a single channel of one input and eight outputs
(1×8), or two independent channels of one input and 4 outputs
• Enable automatic switching input between input 1 and input 2 in the
l×8 configuration when a loss of the input signal is detected
• Input signal presence detect and report
• Automatic input cable equalization
• Maximum equalized cable length adjustable (for 270 Mb/s and
remotely only)
• Direct fanout the input signal (5 Mb/s to 3 Gb/s) without reclocking
• Card edge control by jumpers with LED display
• Remote control via RS-232 or Ethernet
DA-DSR6802+
• Configurable as a single channel of one input, eight outputs or two
independent channels of one input and 4 outputs
• Enable automatic switching input between input 1 and input 2 in the
l×8 configuration when a loss of the input signal is detected
• Input signal presence detect and report
• Automatic input cable equalization
• Maximum equalized cable length adjustable (remotely only)
• Reclocking Mode selectable as automatic or manual
• Re-lockable for 270 Mb/s SMPTE signal
• Re-lockable for DVB-ASI signal
• Reclock status and rate report by LEDs
• Reclocking Bypass mode is selectable as automatic or enforced
• Card edge control by jumpers with LED display
• Remote control via RS-232 or Ethernet
DA-DS6802+
• Configurable as a single channel of one input and eight outputs
(1×8), or two independent channels of one input and 4 outputs.
4 DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 1: Introduction
• Enable automatic switching input between input 1 and input 2 in the
1×8 configuration when a loss of the input signal is detected.
• Input signal presence detect and report
• Automatic input cable equalization
• Maximum equalized cable length adjustable (remotely only)
• Direct fanout the input signal (5Mb/s to 540Mb/s) without
reclocking
• Card edge control by jumpers with LED display
• Remote control via RS-232 or Ethernet
DA-HR6802+
• One input, eight outputs
• Input signal presence detect and report
• Automatic input cable equalization
• Maximum equalized cable length adjustable (for 270 Mb/s and
remotely only)
• Reclocking Mode selectable as automatic or manual
• Re-lockable for 270Mb/s, 1.5 Gb/s and 3.0 Gb/s SMPTE signal
• Re-lockable for DVB-ASI signal
• Reclock status and rate report by LEDs
• Reclocking Bypass mode is selectable as automatic or enforced
• Card edge control by jumpers with LED display
• Remote control via RS-232 or Ethernet
DA-H6802+
• One input, eight outputs
• Input signal presence detect and report
• Automatic input cable equalization
• Maximum equalized cable length adjustable (for 270 Mb/s and
remotely only)
• Direct fanout the input signal (5 Mb/s to 3 Gb/s) without reclocking
• Card edge control by jumpers with LED display
• Remote control via RS-232 or Ethernet
Typical Broadcast and Production Applications
DA-DHR/DH/DSR/DS/HR/H6802+ distribution amplifiers can be
used in broadcast, cable, production, educational, and auditorium
applications where a low cost method of distributing dual channel
signals is required.
/
