Page is loading ...
Installation Instructions,
56677
8” Post to Beam Coupler Laredo
Sunset (P2B-SB-8)
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, 56677
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
1
Typical Installation
upper fasteners sold separately;
OWT Timber Screws or OWT Timber Bolts
56677
Installation Instructions, 56677
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
2
47.82
44.64
1.88
1.76
127
5.00
313.63
12.35
kit contains 2 assemblies
Suggested Tools
(others may be required)
Installation Instructions, 56677
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
3
step 1
Installation Instructions, 56677
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
4
mark location
to mount ledge
beam width
step 2
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, 56677
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
5
3/8" Driver
(Hex Cap Nut) provided
Tool Required
(OWT Screw) provided
3/8" Driver
(HCN)
Tool Required
(OWT Timber Screw)
beam
rests on
ledge
both sold separately
OWT Timber Screw
56621
step 3 Timber Screws
Installation Instructions, 56677
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
6
step 3 Timber Bolts
updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information
Installation Instructions, 56677
V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is
7
see Installation Instructions,
OWT Timber Bolts BEFORE
proceeding
OWT Timber Bolt
sold separately
3/8" Driver
(HCN)
Tool Required
(Timber Bolt)
beam
rests on
ledge
/
